• KIEE International Transactions on Power Engineering
• /
• 제12A권1호
• /
• pp.1-5
• /
• 2002

This paper presents the procedure to construct equivalent model of large power system based on nonlinear time simulation responses. It consists of coherency identification, generator aggregation and network reduction. Coherency index that can be directly implemented to this procedure is proposed. Generator aggregation based on detailed model is performed. This procedure can be used to construct equivalent model in PSS/E. It is also possible to reduce the large power system directly from the nonlinear time responses. This procedure is applied to the transient stability analysis of Korea power system that now experiences rapid changes. The equivalent model is compared with the original model in its size, accuracy, speed and performance. This paper shows that the developed equivalent model is a good estimate of the original system.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제6권4호
• /
• pp.393-402
• /
• 2000

UML은 OMG에 의해서 표준 객체지향 모델링 언어로 승인 받았다. 그러나, UML을 지원하는 몇몇의 CASE 도구들이 생성한 C++ 코드는 1대 n 관계나 aggregation 관계의 의미를 정확히 반영하지 못하고 있다. 또한, 상용 CASE 도구들이 하나의 UML 클래스 다이어그램에서 너무 많은 프로그래밍 언어를 지원하기 때문에, 그들은 C++언어가 가지는 특징을 효율적으로 지원하지 못하고 있다. 제안된 C++코드 생성기는 1대 n의 관계, aggregation 관계, 코드 패턴(code pattern), 디자인 패턴(design pattern)을 지원한다.본 논문에서는 UML 클래스 다이어그램 기반의 효율적인 C++ 코드 생성기의 설계와 구현에 대하여 기술한다.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.729-732
• /
• 2018

본 논문은 다수의 신재생 전원, 선로 및 변압기 데이터를 바탕으로 계획 DB 반영 시 추가되는 발전기 보완을 위한 Aggregation을 수행한다. 본 연구에서는 Aggregation 수행방식 중 Collector 방식과 Step-Up-Transformer를 통한 선로 및 발전기 모델링을 하여 사례연구를 진행한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1067-1069
• /
• 1999

This paper presents a network reduction using weak coupling method. Weak coupling method of identifying coherent generator groups are proposed. The partitioning technique used in this paper is based on a property of sparse matrix factorization. When a matrix has been factorized, a system is divided into study area, boundary buses and external area. A reduction process for external system starts with the load bus elimination and coherent generator aggregation. An identification of coherent generator group, network partitioning and network reduction are presented.

• Korea-Australia Rheology Journal
• /
• 제16권3호
• /
• pp.129-134
• /
• 2004

The aggregation characteristics of red blood cells (RBCs) were measured using a newly developed light-transmission slit rheometer. Conventional methods of RBC disaggregation such as the rotational Couette system were replaced with a pressure-driven slit flow system with a vibrational mechanism. Using a vibration generator, one can disaggregate the RBC aggregates stored in the slit. While shear stress decreases exponentially, instantaneous pressure and the transmitted light intensity were measured over time. Applying an abrupt shearing flow after disaggregation caused a rapid elongation of the RBCs followed by loss of elongation with the decreasing shear stress. While the shear stress is further decreasing, the RBCs start to re-aggregate and the corresponding transmitted intensity increases with time, from which the aggregation indices can be obtained using a curve-fitting program.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권1호
• /
• pp.6-12
• /
• 2001

This paper deals with the development of dynamic equivalents of the Korea Electric Corporation (KEPCO) systems. The weak coupling method is chosen for the most suitable coherency identification to represent the characteristics of the KEPCO system by the dynamic characteristic comparison of several coherency identification methods. Also, this paper shows the detail aggregation of generator groups makes a better representation of the dynamic and static characteristics of the original system than the classical aggregation. The simulation results of the developed KEPCO equivalent system are presented in comparison with the original system to illustrate the validity of the equivalent system are presented in comparison with the original system to illustrate the validity of the equivalent system.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.501-512
• /
• 2012

Social welfare maximization in a double-sided auction market is performed by implementing an aggregation-based particle swarm optimization (CAPSO) algorithm for optimal placement and sizing of one Static Synchronous Series Compensator (SSSC) device. Dallied simulation results (without/with line flow constraints and without/with SSSC) are generated to demonstrate the impact of SSSC on the congestion levels of the modified IEEE 14-bus test system. The proposed CAPSO algorithm employs conventional quadratic smooth and augmented quadratic nonsmooth generator cost curves with sine components to improve the accurate of the model by incorporating the valve loading effects. CAPSO also employs quadratic smooth consumer benefit functions. The proposed approach relies on particle swarm optimization to capture the near-optimal GenCos and DisCos, as well as the location and rating of SSSC while the Newton based load flow solution minimizes the mismatch equations. Simulation results of the proposed CAPSO algorithm are compared to solutions obtained by sequential quadratic programming (SQP) and a recently implemented Fuzzy based genetic algorithm (Fuzzy-GA). The main contributions are inclusion of customer benefit in the congestion management objective function, consideration of nonsmooth generator characteristics and the utilization of a coordinated aggregation-based PSO for locating/sizing of SSSC.

• 한국재료학회지
• /
• 제33권12호
• /
• pp.517-524
• /
• 2023

BaTiO₃-Poly vinylidene fluoride (PVDF) solution was prepared by adding 0~25 wt% BaTiO₃ nanopowder and 10 wt% PVDF powder in solvent. BaTiO₃-PVDF film was fabricated by spreading the solution on a glass with a doctor blade. The output performance increased with increasing BaTiO₃ concentration. When the BaTiO₃ concentration was 20 wt%, the output voltage and current were 4.98 V and 1.03 ㎂ at an applied force of 100 N. However, they decreased when the over 20 wt% BaTiO₃ powder was added, due to the aggregation of particles. To enhance the output performance, the generator was poled with an electric field of 150~250 kV/cm at 100 ℃ for 12 h. The output performance increased with increasing electric field. The output voltage and current were 7.87 V and 2.5 ㎂ when poled with a 200 kV/cm electric field. This result seems likely to be caused by the c-axis alignment of the BaTiO₃ after poling treatment. XRD patterns of the poled BaTiO₃-PVDF films showed that the intensity of the (002) peak increased under high electric field. However, when the generator was poled with 250 kV/cm, the output performance of the generator degraded due to breakdown of the BaTiO₃-PVDF film. When the generator was matched with 800 Ω resistance, the power density of the generator reached 1.74 mW/m². The generator was able to charge a 10 ㎌ capacitor up to 1.11 V and turn on 10 red LEDs.

• 한국인터넷방송통신학회논문지
• /
• 제18권3호
• /
• pp.49-59
• /
• 2018

현재 여러 국가들은 스마트 그리드 시스템의 법적, 기술적, 비즈니스 측면에서 여러 문제점들이 발견되고 있음에도 불구하고 스마트 그리드 배치를 서두르고 있다. 스마트 그리드와 관련하여 중요한 문제는 스마트 미터기의 주된 성능을 그대로 유지하면서 미터 측정값들이 믿을 수 없는 이해집단들로부터 공격을 당하지 않도록 하는 것이다. 이러한 프라이버시 보호 문제는 하드웨어 제약사항, 보안 암호화 시스템과 보안 신호 처리와 같은 몇 가지 해결책들을 요구하고 있다. 본 연구에서는 이와 관련하여 현재 스마트 미터 프라이버시 보호 영역에서 주된 도전 문제가 되고 있는 미터 사용량 집계 암호화에 관한 하나의 접근방식을 제공한다. 개별 에너지 총 사용량에 관한 프라이버시 보호를 위해 개별 사용자 집계 함수에 잡음 가중치를 부여하는 방식을 나타낸다. 접근방식에서 준동형 암호화 성질을 충족하기 위해 잡음 가중치의 곱은 1이 된다. 단적으로 개별 에너지 사용자 집계를 알 수 없도록 하는데 있다. Diffid-Hellman 생성기를 적용하는 경우에 잡음 가중치 곱은 잡음 가중치 합으로 전환되고 가중치 합은 0이 된다. Diffid-Hellman 키 교환은 보통 512비트를 사용하기 때문에 아주 큰 키들을 사용하는 다른 Paillier 계통 암호화 방법들에 비해 보다 우수한 성능을 가진다.

• 대한기계학회논문집B
• /
• 제30권11호
• /
• pp.1027-1034
• /
• 2006

In order to investigate flow characteristics of chicken blood in a micro tube of 100$\mu$m in diameter, in-vitro experiments were carried out using a micro-PIV technique. The micro-PIV system consists of a microscope, 2-head Nd:YAG laser, 12 bit cooled CCD camera and a delay generator. Chicken blood with 40% hematocrit was supplied into a micro tube using a syringe pump. The blood flow shows clearly the cell free layer near the tube wall and its thickness is increased with increasing the flow speed. The hemorheological characteristics of chicken blood, including shear rate and shear stress were estimated from the PIV velocity field data obtained. Since the aggregation index of chicken blood is less than 50% of human blood, non-Newtonian flow characteristics of chicken blood are smaller than those of human blood. As the flow rate increases, the degree of flatness in the velocity profile at the center region is decreased and the parabola-shaped shear stress distribution becomes to have a linear profile. Under the same flow rate, chicken blood shows higher shear stress, compared with human blood.