• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.1-14
• /
• 2005

Statement of problem. Among the physical properties of adhesion luting cement, the aspect that requires the most important factor is the degree of solubility and water sorption. Dissolution or an inadequate due to excessive water sorption inside the oral cavity compromises the while concurrently increasing the susceptibility to secondary dental caries. Susceptibility to dissolution and difficulty of removing remnant cement from the gingival sulcus have hindered the use of dental resin cement in the clinical practice, but the improved characteristics of newer generation resin cements have interest in and enabled resin cements to be widely used in adhesion of fixed prosthesis, such as laminate veneers and all-ceramic crowns. Purpose. The purpose of this study is to compare and analyze the degrees of solubility and water sorption of a variety of resin cements widely used for clinical purposes with different curing methods. Material and methods. Self-curing resin cements, $Avanto^{(R)}$, $C&B^{TM}$ CEMENT and Superbond C&B cements comprised group 1, 2 and 3. The dual-curing resin cements $Panavian^{TM}$ F, $Calibra^{(R)}$ and $Variolink^{(R)}$ II were divided into groups 4, 5, and 6, respectively. The investigation was carried out using disc-shaped specimens as specified by ANSI/ADA Specification No. 27. The degree of water sorption, water solubility and lactic acid solubility of each test group was analyzed statistically leading to the following conclusion. Results. The degree of water sorption was shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. There were significant differences between the water sorption of each group. Results of the degree of water solubility were shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. Statistically significant differences were found between each group, with the exception of groups 1 and 3. Finally, the degree of lactic acid solubility was found to increase in the following order : group 6,5,4,2,3 and 1. Significant differences were found between each group. In general dual-curing resin cements displayed substantially lower values than self-curing resin cements with regard to water sorption, water solubility, and lactic acid solubility. Conclusions. From the results of this study, dual-curing resin cements show a significantly lower degree of water sorption and solubility than their self-curing counterparts. Clinically, when selecting resin cements, the product with a lower degree of water sorption and solubility are preferred. The results of this study indicate that the use-of dual-curing resin cements is preferable to self-curing cements.

• Journal of The Korean Association For Science Education
• /
• v.21 no.1
• /
• pp.76-88
• /
• 2001

This study explored people's accuracy and methods of estimating some base physical quantities, i.e. length, mass, time and temperature. A total of 40 members, ranging from freshmen to professors, of a physics education department of a local university were asked to make two different kinds of estimations, intuitive and operational, on two sets of objects. For intuitive estimation, they were asked to make estimations on four given objects (length - wood chopsticks, mass - rubber eraser, time electric fan, temperature - water in a cup) as soon as they faced with the objects, usually within a few seconds of seeing. For operational estimation, they were allowed to make estimations on a different set of objects (length - plastic rod, mass - lock, time - simple pendulum, temperature - water in a cup) with enough time and they could apply various available methods (e.g. using pencil to estimate the object's length, counting their own pulse rate to estimate time) for the estimation. The findings of this study can be summarized as follows: (1) for length, mass and temperature the intuitive estimations were better performed while for the time estimation the result was the reverse; (2) there was no positive relationship between the amount of physics experience and the accuracy of the estimation; (3) in general, people's accuracy of the length estimation was best performed while their mass estimation was worst performed; (4) people used their own various methods for estimation, esp. using nearby objects around them and applying mental units which have convenient values (e.g. 30cm, 50cm, 1kg, 1 Keun, 1 second).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1749-1757
• /
• 2010

This paper considers the cost minimization problem to satisfy QoS (Quality of Service) requirements for a given network, in particular when communication resources to each link can be additionally assigned. For the purpose of quantifying QoS requirements such as data transfer delay and packet loss, we introduce the cost function considering both the link utilization factor and the additionally assigned resource. To minimize this cost function, we firstly formulate a Basic Capacity Planning (BCP) problem, a special case of Network Utility Maximization (NUM). We show that the solution of this BCP problem cannot be optimal via a counter example. In this paper, we suggest the cross-layer design of both additionally assigned resource and routing path, whose initial values are set to the result of BCP problem. This cross-layer design is based on a heuristic approach which presents an effective way to plan how much communication resources should be added to support the QoS requirements in future. By simulation study, we investigate the convergence of the cost function in a more general network topology as well as in a given simple topology.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.193-198
• /
• 2004

In general, the function of intake structure, whether it be a open channel, a fully wetted tunnel, a sump or a tank is to supply an evenly distributed flow to a pump station. An even distribution of flow, characterized by strong local flow, can result in formation of surface or submerged vortices, and with certain low values of submergence, my introduce air into pun, causing a reduction of capacity and efficiency, an increase in vibration and additional noise. This study investigated experimentally the formation of the vortex to understand the mechanism of vortex formation and to prevent the formation of vortex in the sump model using by the model test and PIV tool. Sump model was manufactured to 1/8 scale with the drawing of W intake pumping station. from the results of model test and PIV, the vortex were occurred the in the whole section. Thus, sump model tests with the anti-vortex device might be considered to prevent the formation of vortex in the sump model.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.131-136
• /
• 2008

We performed a non-destructive geophysical survey such as an elastic wave survey, electric specific resistance survey, plate loading test, etc. in order to grasp the structure and status of the ground around the pillar gate and to provide the directions and design data for preservation and maintenance during reconstruction. The result of electric specific resistance survey shows 50-1300 ohm-m range of general electric specific resistance distribution. Besides, the positions around 1m south of stone pillars, between stone pillar No.3 and 4, and 1m north of stone pillar No.2 and 3 show abnormality of relatively lower electric specific resistance than their surroundings. The abnormality of low electric specific resistance appearing between stone pillar No.3 and 4 shows consistency with the abnormal section appearing from the result of elastic wave reflection survey. The result of a plate loading test shows that allowable bearing force is over $10.70tf/m^2$, and the settlement amount at this time was calculated as 19.635mm. The design load during reconstruction of pillar gates was calculated as $16.37t/m^2$ by applying assumption values, which is far more than the allowable bearing force, so it is judged that a measure to strengthen the foundation ground is necessary.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.13-21
• /
• 2014

In this paper, we study on an 'e-Atlas of Society & Culture(e-ASC)', to develop and implement educational courseware for marriage immigrant women, to adapt Korean society. The 'e-ASC' can help cultural adaptation, such as the understanding of Korean people's common values and behaviors and can likewise provide opportunities to contribute to Korean society, for marriage immigrant women living in Korea. E-cultural map is a useful tool for providing educational experiences and sharing a sociocultural homogeneity, using three dimensional space, for both immigrants and residents. The 'e-Atlas of Society & Culture', suggested in this paper, using the notion of an E-cultural map, has a strong point. That is to say, the immigrants have contextual limitations about Korea and Korean culture, caused by some particular events in their motherland. This atlas provides an opportunity to overcome this contextual limitations and to help understand and adapt to Korean society for these immigrants. This 'e-Atlas of Society & Culture' can be an efficient educational tool for immigrants and can help marriage immigrant women understand and adapt Korean social and cultural phenomena. They might have contextual limitations about these phenomena in their motherland.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.1
• /
• pp.17-26
• /
• 2018

This study aimed to investigate the effects of vacuum packaging on the quality characteristics of frozen Tteokgalbi made from spent laying hen meat and mechanically deboned chicken meat (MDCM). The samples were prepared with different levels of added MDCM; C (0%), T1 (20%), T2 (40%), and T3 (60%). The samples were allocated for microbiological and physico-chemical analyses after 0, 45, and 90 days at $-18^{\circ}C$, with or without vacuum packaging. After 90 days of storage, the values of volatile basic nitrogen were significantly lower in the vacuum packaged samples compared to the non-vacuum samples, irrespective of the added levels of MDCM (p<0.05). Sensory results at day 0 of storage showed that the texture scores of C and T1 samples were significantly higher than those of T2 and T3, while the flavor scores were the lowest for the T3 samples (p<0.05). In addition, with increased storage duration, the texture and flavor attributes of the vacuum-packaged samples were found to be higher than those of non-vacuum samples. In general, the vacuum-packaged samples tended to show superior physico-chemical quality characteristics compared to the non-vacuum samples, when the storage time was extended up to 90 days.

• Management & Information Systems Review
• /
• v.34 no.3
• /
• pp.125-140
• /
• 2015

KOSDAQ market reorganized their division system from two types to four types of division departments such as blue chip, venture, medium, and technology development departments in 2011. However, under the current new division system, financially unhealthy firms attempting to take advantage of the classifying opportunity of blue chip department are likely to engage in pernicious earnings management. The objective of this study is to investigate the earnings management behavior surrounding the time of KOSDAQ firms entering the blue chip department via new division system. More specifically, we test whether the firms classified blue chip department tend to engage in upward earnings management using accruals and real activities before and after they achieve blue chip status. In this study, we analyzed 111 firms classified blue chip department in 2011 according to new division system in KOSDAQ market. Major test results indicate that firms entering the blue chip department according to current KOSDAQ division system in general, tend to inflate reported earnings by means both of accruals and real activities right before the entering year. This result suggests that the firms classified blue chip department engage in opportunistic earnings management with a view to uplifting their market values. Our study is expected to provide clues useful for searching policy directions which intend to ameliorate adverse side effects of the current KOSDAQ division system. In sum, the regulatory authorities and enforcement bodies need to exercise caution in deliberating more stringent review procedures so that financially healthy and promising candidates are properly segregated from their poor and risky counterparts, thus enhancing the beneficial effects, while mitigating adverse side effects of the system.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.206-214
• /
• 2007

The theoretical study is developed for predicting the thermal expansion changes of composites which include complex inclusion, which is used three-dimensional ellipsoid model ($a_1>a_2>a_3$), which has two aspect ratios (the primary aspect ratio, $\rho_{\alpha}=a_1/a_3$ and the secondary aspect ratio, $\rho_{\beta}=a_1/a_2$). We can predict the feature of general thermal expansion factors by theoretical approach of matrix with aligned ellipsoidal inclusion using the Eshelby's equivalent tensor. The coefficients of longitudinal linear thermal expansion ${\alpha}_{11}$ decrease to those of inclusions, ${\alpha}_f$, as both aspect ratios increase. The coefficients of transverse linear thermal expansion of composites ${\alpha}_{33}$ initially increase and show the parabolic corves with maximum values, as the concentrations of filler increase. The coefficient of thermal expansion, ${\alpha}_{22}$ in the transverse direction decreases, as $\rho_{\alpha}$ increases, however, ${\alpha}_{22}$ increases as $\rho_{\beta}$ increases. The coefficient of linear thermal expansion of composites, ${\alpha}_{33}$ in the normal direction increases, as $\rho_{\alpha}$ increases, while ${\alpha}_{33}$ decreases as $\rho_{\beta}$ increases.

• Journal of Veterinary Clinics
• /
• v.29 no.2
• /
• pp.130-133
• /
• 2012

The purpose of this study is to assess the relationship between glomerular filtration rate (GFR) and age by using dynamic computed tomography (CT) and Patlak plot analysis in dogs. Fifteen dogs were used in this study. CT-GFR study was performed under general anesthesia using propofol and isoflurane. 1 ml/kg dosage of 300 mgI/ml iohexol was administered at a rate of 3 ml/s during GFR measurement. CT-GFR was determined with a single-slice dynamic acquisition and Patlak plot analysis. The individual and global GFR values were calculated to plasma clearance per body weight (ml/min/kg). Bodyweight ($mean{\pm}SD$) ranged from 2.0 to 5.7 kg ($3.31{\pm}1.13$ kg). Age ranged from 3 years to 13 years old ($7.14{\pm}3.30$). $Mean{\pm}SD$ creatinine ($0.53{\pm}0.34 $mg/dl), phosphorus ($4.1{\pm}1.2$ mg/dL), and albumin ($3.3{\pm}0.3$ mg/dL) concentrations and urine protein-to-creatinine ratios (all ratios were < 0.5) were within reference ranges. Abdominal ultrasonography revealed small-sized renal calculi, mineralization, or renal cyst at eight dogs. The global CT-GFR ranges shown in this study was 2.57 to 6.60 ml/min/kg. In this study, there was no trend toward weight-adjusted CT-GFR with increasing age. We found no relationships between age-related kidney dysfunction in fifteen dogs. Small-sized renal calculi or cysts did not affect renal function in this study. However, it is thought that a large sample size may have been required to document an age effect.