• 제목/요약/키워드: general failure model

검색결과 246건 처리시간 0.025초

국소 진행된 직장암에서 수술 후 화학방사선요법 (Postoperstive Chemoradiotherapy in Locally Advanced Rectal Cancer)

  • 채규영;강기문;최상경
    • Radiation Oncology Journal
    • /
    • 제20권3호
    • /
    • pp.221-227
    • /
    • 2002
  • 목적 : 후향적 분석을 통해 직장암에서 수술 후 화학방사선요법의 치료실패 양상 및 생존율을 확인하고, 그 결과를 다른 연구들과 비교 분석하여 직장암에서의 수술 후 화학방사선요법의 역할을 규명하고자 본 연구를 시행하였다. 대상 및 방법 : 1989년 3월부터 1998년 12월까지 경상대학교병원 치료방사선과에서 직장암으로 수술 후 화학방사선 요법을 받은 119명을 대상으로 후향적 분석을 시행하였다. 모든 환자는 AJCC의 TNM 병기로 분류하여 분석하였다. 연구 대상의 연령 분포는 32세에서 73세까지였으며 중앙값은 56세였다. 수술은 전복부 절제술을 시행받은 경우가 59명, 복부회음 절제술을 시행받은 경우가 60명이었다. T2 12명, T3 96명, 74 11명이었고, N0 43명, N1 53명, N2 23 명이었다. 방사선치료는 6 MV 선형가속기를 이용하여 하루 1.8 Gy씩 주당 9 Gy를 조사하였다. 전 골반 조사량은 $40\~50\;Gy$였으며, 필요에 따라 $5\~6\;Gy$를 소조사야로 추가 조사하였다. 5-FU는 주사로 투여된 경우가 73명, 경구로 투여된 경우가 46명이었다. 추적기간의 기준일은 수술을 시행한 날로 하여 생존자의 경우 최소 추적기간을 3년으로 하였다. 생존율 분석은 Kaplan-Meier 법을 사용하였고 단변량 분석은 log rank test를, 다변량 분석은 Cox regression hazard model을 사용하였다. 결과 : 전체 대상 중 40명이 치료에 실패하여 치료 실패율은 $33.7\%$였다. 국소 단독 실패가 9명$(7.6\%)$, 원격 단독 실패가 24명$(20.2\%)$, 국소 및 원격 실패가 7명$(5.9\%)$으로서, 국소 실패율은 $13.5\%$, 원격 실패율은 $26.1\%$였다. 국소 실패 부위는 골반내 장기가 가장 많았고, 연결부위, 골반 림프절 순이었다. 회음부에서 실패된 경우는 없었다. 원격전이 부위는 간과 폐가 가장 많았다. 전체 5년 생존율 및 무병생존율은 각각 $56.2\%,\;53.3\%$였고, 생존기간의 평균값은 64.8개월, 중앙값은 74개월이었다. T3, T4에서 5년 생존율은 $59.9\%,\;16.8\%$ (p=0.002), 무병 생존율은 $57.2\%,\;25.6\%$였다. N0, N1, N2에서 5년 생존율은 $71.1\%,\;56.7\%,\;31.9\%$, (u=0.0008), 무병생존율은 $68.2\%,\;52.6\%,\;30.1\%$ (p=0.0006)였다. 병기 II, III에서의 5년 생존율은 $71.1\%,\;49.1\%$ (p=0.02), 무병 생존율은 $68.1\%,\;45.8\%$ (p=0.01)였다. 다변량 분석에서 5년 생존율에 영향을 미치는 유의한 인자는 T, N 병기였고, 5년 무병생존율에 영향을 미치는 유의한 인자는 T, N 병기 및 수술 전 CEA 값이었다. 15명$(12.6\%)$에서 수술이 요구되는 장합병증이 발생하였다. 결론 : 수술 후 화학방사선요법은 국소 진행된 직장암에서 국소제어를 위한 효과적인 방법임이 확인되었으나 원격 실패에 대한 효과는 미약하였다. 향후 국소 진행된 직장암의 생존율을 향상시키기 위해서는 원격실패를 낮추고 림프절 전이가 있는 직장암의 국소제어율을 높일 수 있는 치료방법이 개발되어야 할 것으로 사료된다.

서비스주의 법제도 구조와 운용 연구 (A Servicism Model of the New Legal System)

  • 김현수
    • 서비스연구
    • /
    • 제11권4호
    • /
    • pp.1-20
    • /
    • 2021
  • 본 연구는 서비스주의 경제, 정치행정, 사회교육 시스템을 구현하는 바탕이 되는 법제도 모델 도출을 위해 수행되었다. 지난 역사시대 5천여년간 인류의 법제도 운용 경험을 토대로 미래 인류사회를 지속가능하게 할 새로운 법제도 모델을 도출하였다. 인류 역사에서 시도된 여러 법제도 시스템을 통해 현대사회에 바람직한 법제도시스템의 구조를 설계하였다. 좋은 법제도가 인간의 비이성과 비상식에 의해 얼마나 오용되어 왔고 오용되고 있는지를 경험한 인류사회는 실패를 통해 교훈을 얻어 법제도 패러다임 자체를 바꾸는 노력을 할 필요가 있는 것이다. 현재 법제도시스템의 문제점을 근본적 차원에서 분석하였다. 정의와 공정이 바로 서지 못하는 근본 원인을 분석하고, 새로운 법제도 시스템을 설계하였다. 본 연구는 장기적으로 정의와 공정사회를 구현할 수 있도록 법제도시스템의 기반을 도출하였다. 인류사회가 오래도록 행복할 수 있는 법제도 개선 모델을 제안하였다. 이를 위해 사상적 차원에서 법제도시스템의 근본 역할을 분석하고 현재 법제도의 문제점을 제시하였다. 또한 인간의 본성에 대한 근본 가정상의 문제점을 분석하고, 개선된 가정을 제시하였다. 현재 법제도시스템의 구조적 체계를 분석하고 새로운 구조를 제시하였다. 새로운 구조에 의한 새로운 법제도 운용 방안을 제시하였다. 새로운 법제도시스템은 서비스주의 시스템으로 명명되었다. 모든 대립자들간의 철저한 견제와 균형이 중심이 되는 모델이기 때문이며, 단순 선형 1차원 법제도시스템이 아니라 다차원적 법제도시스템이기 때문이고, 또한 인간의 비이성과 욕망을 뚜렷하게 인정하는 관점이기 때문이다. 새로운 시스템은 법치와 비법치의 대립, 성선설과 성악설의 대립, 법제정 운용자와 피운용자간의 대립, 권력자와 일반시민간의 대립 등을 모두 반영하는 모델이다. 현 법제도에서 새로운 법제도시스템으로 전환하는 구체적인 방안에 대한 후속 연구가 필요하다.

조직의 정보 니즈와 ERP 기능과의 불일치 및 그 대응책에 대한 이해: 조직 메모리 이론을 바탕으로 (Understanding the Mismatch between ERP and Organizational Information Needs and Its Responses: A Study based on Organizational Memory Theory)

  • 정승렬;배억호
    • Asia pacific journal of information systems
    • /
    • 제22권2호
    • /
    • pp.21-38
    • /
    • 2012
  • Until recently, successful implementation of ERP systems has been a popular topic among ERP researchers, who have attempted to identify its various contributing factors. None of these efforts, however, explicitly recognize the need to identify disparities that can exist between organizational information requirements and ERP systems. Since ERP systems are in fact "packages" -that is, software programs developed by independent software vendors for sale to organizations that use them-they are designed to meet the general needs of numerous organizations, rather than the unique needs of a particular organization, as is the case with custom-developed software. By adopting standard packages, organizations can substantially reduce many of the potential implementation risks commonly associated with custom-developed software. However, it is also true that the nature of the package itself could be a risk factor as the features and functions of the ERP systems may not completely comply with a particular organization's informational requirements. In this study, based on the organizational memory mismatch perspective that was derived from organizational memory theory and cognitive dissonance theory, we define the nature of disparities, which we call "mismatches," and propose that the mismatch between organizational information requirements and ERP systems is one of the primary determinants in the successful implementation of ERP systems. Furthermore, we suggest that customization efforts as a coping strategy for mismatches can play a significant role in increasing the possibilities of success. In order to examine the contention we propose in this study, we employed a survey-based field study of ERP project team members, resulting in a total of 77 responses. The results of this study show that, as anticipated from the organizational memory mismatch perspective, the mismatch between organizational information requirements and ERP systems makes a significantly negative impact on the implementation success of ERP systems. This finding confirms our hypothesis that the more mismatch there is, the more difficult successful ERP implementation is, and thus requires more attention to be drawn to mismatch as a major failure source in ERP implementation. This study also found that as a coping strategy on mismatch, the effects of customization are significant. In other words, utilizing the appropriate customization method could lead to the implementation success of ERP systems. This is somewhat interesting because it runs counter to the argument of some literature and ERP vendors that minimized customization (or even the lack thereof) is required for successful ERP implementation. In many ERP projects, there is a tendency among ERP developers to adopt default ERP functions without any customization, adhering to the slogan of "the introduction of best practices." However, this study asserts that we cannot expect successful implementation if we don't attempt to customize ERP systems when mismatches exist. For a more detailed analysis, we identified three types of mismatches-Non-ERP, Non-Procedure, and Hybrid. Among these, only Non-ERP mismatches (a situation in which ERP systems cannot support the existing information needs that are currently fulfilled) were found to have a direct influence on the implementation of ERP systems. Neither Non-Procedure nor Hybrid mismatches were found to have significant impact in the ERP context. These findings provide meaningful insights since they could serve as the basis for discussing how the ERP implementation process should be defined and what activities should be included in the implementation process. They show that ERP developers may not want to include organizational (or business processes) changes in the implementation process, suggesting that doing so could lead to failed implementation. And in fact, this suggestion eventually turned out to be true when we found that the application of process customization led to higher possibilities of failure. From these discussions, we are convinced that Non-ERP is the only type of mismatch we need to focus on during the implementation process, implying that organizational changes must be made before, rather than during, the implementation process. Finally, this study found that among the various customization approaches, bolt-on development methods in particular seemed to have significantly positive effects. Interestingly again, this finding is not in the same line of thought as that of the vendors in the ERP industry. The vendors' recommendations are to apply as many best practices as possible, thereby resulting in the minimization of customization and utilization of bolt-on development methods. They particularly advise against changing the source code and rather recommend employing, when necessary, the method of programming additional software code using the computer language of the vendor. As previously stated, however, our study found active customization, especially bolt-on development methods, to have positive effects on ERP, and found source code changes in particular to have the most significant effects. Moreover, our study found programming additional software to be ineffective, suggesting there is much difference between ERP developers and vendors in viewpoints and strategies toward ERP customization. In summary, mismatches are inherent in the ERP implementation context and play an important role in determining its success. Considering the significance of mismatches, this study proposes a new model for successful ERP implementation, developed from the organizational memory mismatch perspective, and provides many insights by empirically confirming the model's usefulness.

  • PDF

중장년 직장인의 창업 개인역량 및 창업기회인식이 창업의도에 미치는 영향: 창업기회평가의 매개효과를 중심으로 (The Effect of Entrepreneurial Competence and Perception of Entrepreneurship Opportunities on Entrepreneurial Intention: Focusing on the Mediating Effect of Entrepreneurship Opportunity Assessment)

  • 진주영
    • 벤처창업연구
    • /
    • 제18권3호
    • /
    • pp.45-60
    • /
    • 2023
  • 본 연구에서는 창업기회평가를 매개하여 중장년 직장인의 창업 개인역량과 창업기회인식이 창업의도에 미치는 영향을 분석하였다. 창업 개인역량의 하위변수로는 사전지식, 긍정적 태도, 사회적 네트워크로 구분하였다. 본 연구의 실증분석을 위하여 창업에 관심이 있는 전국의 직장인을 대상으로 약 15일간(2023.02.06.~2023.02.20.) 네이버 오피스를 이용한 온라인 설문조사를 실시하였으며, 총 262부를 수집하여 결측치 12부를 제외한 250부를 대상으로 SPSS Ver.24.0과 PROCESS MACRO Model 4.0을 실증분석에 사용하였다. 분석결과는 첫째, 창업자 개인역량의 사전지식과 사회적 네트워크 및 창업기회인식은 높을수록 창업기회평가와 창업의도가 증가하는 유의한 정(+)의 영향력을 미치는 것으로 나타났다. 반면 창업자 개인역량 중 긍정적 태도는 창업기회평가 및 창업의도에 영향을 미치지 않는 것으로 나타났다. 또한 창업기회평가 및 창업의도에 미치는 영향력의 크기는 창업기회인식, 사전지식, 사회적 네트워크 순으로 나타났다. 이는 중장년 직장인의 창업에 대한 긍정적태도는 COVID-19로 인한 창업환경 위축, 창업준비 부족으로 인한 실패의 두려움, 과잉자신감에 따른 인지편향의 오류로 인한 창업실패 사례 속출 등으로 창업이 부정적인 이미지를 가지고 있다는 것을 시사하고 있다. 둘째, 창업자 개인역량과 창업기회인식이 통제된 상황에서 창업기회평가는 창업의도에 유의한 정(+)의 영향을 미치는 것으로 나타났다. 셋째, 창업기회평가는 창업자 개인역량의 사전지식, 사회적 네트워크 및 창업기회인식과 창업의도 간을 매개하는 것으로 나타났지만, 긍정적 태도와 창업의도 간은 매개하지 않는 것으로 나타났다. 넷째, 창업기회평가 및 창업의도에 미치는 영향요인 중 창업자 개인역량보다 창업기회인식이 더 크게 나타나 창업기회인식의 중요함이 확인하였다. 다섯째, 창업자 개인역량인 사전지식과 네트워크가 창업기회평가 및 창업의도에 영향을 미치는 것으로 나타나 창업사전지식 함양 및 경험의 중요성을 인식하도록 창업교육을 강화하면 중장년 직장인들의 창업을 활성화할 수 있다는 점을 확인하였다.

  • PDF

ICT 인프라 이상탐지를 위한 조건부 멀티모달 오토인코더에 관한 연구 (A Study of Anomaly Detection for ICT Infrastructure using Conditional Multimodal Autoencoder)

  • 신병진;이종훈;한상진;박충식
    • 지능정보연구
    • /
    • 제27권3호
    • /
    • pp.57-73
    • /
    • 2021
  • ICT 인프라의 이상탐지를 통한 유지보수와 장애 예방이 중요해지고 있다. 장애 예방을 위해서 이상탐지에 대한 관심이 높아지고 있으며, 지금까지의 다양한 이상탐지 기법 중 최근 연구들에서는 딥러닝을 활용하고 있으며 오토인코더를 활용한 모델을 제안하고 있다. 이는 오토인코더가 다차원 다변량에 대해서도 효과적으로 처리가 가능하다는 것이다. 한편 학습 시에는 많은 컴퓨터 자원이 소모되지만 추론과정에서는 연산을 빠르게 수행할 수 있어 실시간 스트리밍 서비스가 가능하다. 본 연구에서는 기존 연구들과 달리 오토인코더에 2가지 요소를 가미하여 이상탐지의 성능을 높이고자 하였다. 먼저 다차원 데이터가 가지고 있는 속성별 특징을 최대한 부각하여 활용하기 위해 멀티모달 개념을 적용한 멀티모달 오토인코더를 적용하였다. CPU, Memory, network 등 서로 연관이 있는 지표들을 묶어 5개의 모달로 구성하여 학습 성능을 높이고자 하였다. 또한, 시계열 데이터의 특징을 데이터의 차원을 늘리지 않고 효과적으로 학습하기 위하여 조건부 오토인코더(conditional autoencoder) 구조를 활용하는 조건부 멀티모달 오토인코더(Conditional Multimodal Autoencoder, CMAE)를 제안하였다. 제안한 CAME 모델은 비교 실험을 통해 검증했으며, 기존 연구들에서 많이 활용된 오토인코더와 비교하여 AUC, Accuracy, Precision, Recall, F1-score의 성능 평가를 진행한 결과 유니모달 오토인코더(UAE)와 멀티모달 오토인코더(Multimodal Autoencoder, MAE)의 성능을 상회하는 결과를 얻어 이상탐지에 있어 효과적이라는 것을 확인하였다.

강바닥판 교량의 포장시 열영향 해석을 위한 등가열원 산정기법 (An Estimation of Equivalent Heat Source for Thermal Analysis of Steel Deck Bridge under Pavement Procedure)

  • 정흥진;유병찬;이완훈
    • 한국전산구조공학회논문집
    • /
    • 제20권5호
    • /
    • pp.653-660
    • /
    • 2007
  • 강바닥판 포장에 사용될 수 있는 특수아스팔트 중의 하나인 구스아스팔트는 $240^{\circ}C$에서 $260^{\circ}C$의 고온 상태에서 시공되기 때문에 강바닥판에 예상하지 못한 열응력 및 열변형을 발생시킬 수 있다. 따라서 구스아스팔트의 타설 중에 강바닥판에 미치는 열영향을 시공조건을 고려하여 사전에 평가하고 그 영향의 최소화를 위해서는 열전달 및 열응력 수치해석을 실시하여야 하지만 구조해석에서 주로 사용되는 평판/보요소의 특성상 3차원 구조해석 모델에서 구현하기가 매우 어렵다. 본 연구에서는 강바닥판 교량의 열영향해석을 위하여 일반적인 구조해석모델에 직접 적용할 수 있는 등가열원(EHS) 산정방법을 제안하였다. 강바닥판 교량의 구스아스팔트에 의한 열영향을 정확히 평가하기 위하여 (1) 기존의 실험결과를 이용하여 열전달해석에 필요한 물리량을 검증하고, (2) 정밀해석을 통해 3차원 교량모델에 적합한 등가열원을 산정하였으며, (3) 이를 해석모델에 적용하여 산정한 등가열원에 의한 수치해석방법의 타당성을 검증하였다. 본 연구에서 제안된 등가열원은 실제 강교량의 3차원 열전달 및 열응력 해석에 즉각 활용될 수 있으며, 등가열원산정기법은 용접잔류응력해석, 교량의 화재 해석 등 열영향을 받는 다른 공학적 해석에 응용될 수 있을 것으로 기대된다.

압축 및 인발하중을 받는 그물식 뿌리말뚝의 최적 타설경사각 (An Optimum Slanting Angle in Reticulated Root Piles Installation under Compressive and Uplift Loads)

  • 이승현;김명보
    • 한국지반공학회지:지반
    • /
    • 제12권2호
    • /
    • pp.71-84
    • /
    • 1996
  • 본 연구에서는 여러가지의 타설경사각을 갖는 모형 그물식 뿌리말뚝을 제작하여 모형토조에 설치하고 레이닝(raining)방법으로 지반을 조성한 다음 압축시험 및 인발시험을 하여 그물식 뿌리말뚝의 타설경사각과 하중지지력 사이의 관계를 비교분석 하였다. 모형말뚝은 0$^{\circ}$, 5$^{\circ}$, $10^{\circ}$, 15$^{\circ}$, 20$^{\circ}$, 그리고 25$^{\circ}$의 타설경사각을 갖는 직경 Sulm의 강봉에 모래를 입힌 것으로 직경이 6.5muL 길이가 300mm가 되도록 하였다. 모형 뿌리말뚝의 배치는 동일한 타설경사각을 갖는 8개의 모형 말뚝을 4개씩 2개의 크고 작은 동심원에 접하도록 하였다. 그리고 모형 원형 얕은 기초를 제작하여 압축시험을 수행한 다음 지지력을 구하여 뿌리말뚝의 지지력과 비교하였다. 압축시험 및 인발시험 결과를 회귀분석하면 하중지지능력이 최대가 되는 타설경사각은 대략 12$^{\circ}$~13$^{\circ}$사이이다. 최적 타설경사각에서의 뿌리말뚝의 압축지지력은 원형 얕은기초의 지지력과 비교하면 약 2.0배이고, 연직으로 타설된 뿌리말뚝의 경우와 비교하면 13%의 지지력 증대효과가 있다. 그리고 최적타설경사각에서의 뿌리말뚝의 인발저항력은 연직으로 타설된 뿌리말뚝의 경우 에 비해 21%의 인발저항력 증대효과가 있다. 압축시험으로부터 얻은 하중-침하량곡선은 타설 경사각이 없는 경우에 전반전단파괴 형태를 나타내며,타설경사각이 5$^{\circ}$, $10^{\circ}$인 경우, 하중은 극한 지지력에 도달한 후 일정한 값을 유지하는 양상을 보인다. 타설경사각이 15$^{\circ}$, 20$^{\circ}$, 25$^{\circ}$로 증가하면서 하중은 극한지지력에 도달한 후에도 계속 증가하는 경향이 있다. 따라서, 타설경사각이 있는 경우의 뿌리말뚝은 압축지지력을 초과하여 하중을 받더라도 급격한 파괴에 이르지 않고 점차로 변위가 증가하는 연성 (ductile)거동을 보일 것으로 예상된다.

  • PDF

덧씌우기 응력흡수층에 대한 전단, 부착강도 평가 및 파괴에너지 예측모델 개발 (Evaluation of Interlayer Shear Properties and Bonding Strengths of a Stress-Absorbing Membrane Interlayer and Development of a Predictive Model for Fracture Energy)

  • 김도완;문성호;권오선;문기훈
    • 한국도로학회논문집
    • /
    • 제20권1호
    • /
    • pp.87-95
    • /
    • 2018
  • PURPOSES : A geo-grid pavement, e.g., a stress-absorbing membrane interlayer (SAMI), can be applied to an asphalt-overlay method on the existing surface-pavement layer for pavement maintenance related to reflection cracking. Reflection cracking can occur when a crack in the existing surface layer influences the overlay pavement. It can reduce the pavement life cycle and adversely affect traffic safety. Moreover, a failed overlay can reduce the economic value. In this regard, the objective of this study is to evaluate the bonding properties between the rigid pavement and a SAMI by using the direct shear test and the pull-off test. The predicted fractural energy functions with the shear stress were determined from a numerical analysis of the moving average method and the polynomial regression method. METHODS : In this research, the shear and pull-off tests were performed to evaluate the properties of mixtures constructed using no interlayer, a tack-coat, and SAMI with fabric and without fabric. The lower mixture parts (describing the existing pavement) were mixed using the 25-40-8 joint cement-concrete standard. The overlay layer was constructed especially using polymer-modified stone mastic asphalt (SMA) pavement. It was composed of an SMA aggregate gradation and applied as the modified agent. The sixth polynomial regression equation and the general moving average method were utilized to estimate the interlayer shear strength. These numerical analysis methods were also used to determine the predictive models for estimating the fracture energy. RESULTS : From the direct shear test and the pull-off test results, the mixture bonded using the tack-coat (applied as the interlayer between the overlay layer and the jointed cement concrete) had the strongest shear resistance and bonding strength. In contrast, the SAMI pavement without fiber has a strong need for fractural energy at failure. CONCLUSIONS : The effects of site-reflection cracking can be determined using the same tests on cored specimens. Further, an empirical-mechanical finite-element method (FEM) must be done to understand the appropriate SAMI application. In this regard, the FEM application analy pavement-design analysis using thesis and bonding property tests using cored specimens from public roads will be conducted in further research.

가토대퇴정맥에서 미세혈관문합시 Argatroban의 국소세척 및 전신투여가 혈전형성에 미치는 영향 (EFFECTS OF LOCAL IRRIGATION AND/OR INTRAVENOUS ADMINISTRATION OF ARGATROBAN ON THROMBOSIS IN MICROVASCULAR ANASTOMOSES OF FEMORAL VEIN OF RABBIT)

  • 국민석;박홍주;오희균
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제31권4호
    • /
    • pp.300-305
    • /
    • 2005
  • Purpose: For the reconstruction of maxillofacial defect created by trauma, infection, or tumor etc, the role of microvascular anastomosis or vessel graft has been increased. Many methods has been tried to increase the success rate of microvascular anastomosis. Various anticoagulants and thrombolytic agents have been used to reduce the failure rate of microvascular anastomosis and avoid re-operation. Many drugs, however, have been used in the limited cases because most of these drugs may cause complications, such as allergy, fever or systemic bleeding. This study was performed to evaluate the influence of the Argatroban on patency and thrombosis in microvascular anastomosis when it is used for local irrigation or general administration. Materials & methods: Eight mature rabbits, weighing 2kg, were used. After exposing both femoral veins, the artificial thrombotic model was made by crushing injury using a smooth needle holder, and the transverse incision were made on femoral vein. The animals were divided into 4 groups according to Argatroban administration methods; control group (n=4), topical irrigation of lumen with saline solution; experimental group 1 (n=4), topical irrigation of lumen with Argatroban saline solution; experimental group 2 (n=4), topical irrigation of lumen with heparin followed by intravenous injection of Argatroban; experimental group 3 (n=4), topical irrigation of lumen with Argatroban followed by IV of Argatroban. Microvascular anastomosis was done with 10-0 Ethilon. The patency was evaluated by empty-and-refill test 30 minutes and 3 days after microanastomosis. The thrombus formation was examined 3 days after microanastomosis by surgical microscope. The histologic findings were also examined. Results: 1. Thirty minutes after microvascular anastomosis, the patency of all experimental groups was better than that of control group, but there was no significant difference among groups. 2. Three days after microvascular anastomosis, the patency of all experimental groups was more improved than that of control group (p<0.05). There was no significant difference among experimental groups. 3. Three days after microvascular anastomosis, the amount of thrombus in all experimental groups was less than that of control group (p<0.05). There was no significant difference among experimental groups. 4. Histologically, a lot of luminal thrombus was observed around sutured area in control group. Few luminal thrombus was observed in all experimental groups. The necrotic changes were observed on the sutured vein wall in all specimens. Conclusion: These results indicate that topical irrigation and/or intravenous administration of Argatroban is effective in improving patency and preventing thrombus formation after microvascular anastomosis.

타워크레인의 정량적 위험성 평가가법에 관한 연구(FMEA 기법 위주) (A Quantitative Risk Analysis of Related to Tower Crane Using the FMEA)

  • 심규형;이동호
    • 한국안전학회지
    • /
    • 제25권6호
    • /
    • pp.34-39
    • /
    • 2010
  • 본 연구는 건설현장에서 사용하고 있는 타워크레인에 대한 검사기관의 검사결과를 토대로 위험성과 중요도를 미리 검토하고 분석하여, 상호간의 검사 기준에 대한 판정기준을 정립하고 검사능력을 UP-Grade 시킬 수 있는 기회로 활용하기 위한 방안으로, 적절한 평가방법을 도입하여 객관적인 평가 모텔을 제시하는데 목적이 있다. 타워크레인은 건축물 또는 구조물 등, 건설현장에 설치되어 짧게는 2~3개월부터 2년 남짓 동안 지상에서 20~150M 이상 높은 곳으로 건설자재와 중량물 등을 실어 나르는 기계장치로, 건설 현장에서는 없어서는 안될 중요한 설비이다. 그러나 설치해서 사용하는 기간이 짧고, 건설 현장의 기술자들이 타워크레인에 대한 전문 기술력이 부족하여 체계적이고 정량적인 안전관리가 이루어지지 않고 있다. 이러한 문제점을 해결하기 위해서 전문가들의 지식과 경험을 바탕을 한 지식기반기법과 타워크레인에 적용 가능한 RBI절차 연구의 일환으로 정량적 위험우선순위를 FMEA기법을 활용하여 RPN을 적용시켜 보았다. 일반적인 RBI 80/20 Rule을 적용시켜 보았을 때, 위험도가 높은 부분은 와이어로프, 권과방지장치 및 브레이크와 권상감속기 등으로 나타났다. 하지만, 아직 타워크레인에 대한 위험분석이 제대로 이루어지지 않아 미흡한 부분이 많지만, 본 연구를 시작으로 좀 더 경험과 지식이 풍부한 전문가들이 나서서 중요 정보를 공유하고 data base화 하여, 타워크레인에 대한 활발한 RBI 기법의 보완과 지속적인 연구개발이 필요하다.