• Journal of Korea Port Economic Association
• /
• v.39 no.4
• /
• pp.295-308
• /
• 2023

Busan Port, as Korea's representative trading port, handles a variety of port cargo from bulk cargo to container cargo. Busan Port is currently functioning as a container specialized port for North Port and Busan New Port, and Gamcheon Port is also handling container cargo mainly in bulk cargo. This study intends to examine the overlapping cargoes and specialized cargoes between these ports and Busan Port as the amount of import and export cargoes in ports designated as trade ports in Korea is increasing. In order to understand the characteristics of the major cargoes handled in the port, the quantitative change is confirmed through the total cargo volume of major domestic ports and the trend of changes in import/export cargo between Busan Port and major ports is analyzed. There are many specialized investigation methods, but as the most basic method, we will examine quantitative changes and causes by simply examining the data for 10 years as the amount of change by cargo. In addition, the causes of these fluctuations should be reclassified into domestic and foreign causes by identifying changes in customers in different ports and shipping volumes, changes in consumption areas, and transshipment volumes. Through the analysis of the major cargo volume of each port, the characteristics and fluctuation trends of major cargo handled in Busan Port and other ports are identified, and the competitive cargoes of each port are verified. Through this, the characteristics and competitiveness of the port are inferred, and implications for the cargo volume of Busan Port and future countermeasures are suggested.

• Journal of Korean Port Research
• /
• v.3 no.1
• /
• pp.35-55
• /
• 1989

Today, about 99% of total import and export cargo in Korea is being transported through the port. The general trends of cargo handling show increases in capacity and speed, In order to cope with these trends, it is not only required to raise the efficiencies of port operation and function but also necessary to decide the optimal amount of the skilled labor force for cargo handling in the port. Cargo handling in the port is basically relied on the cargo handling facilities. Therefore, it is very important to reserve the amount of labor force for cargo handling system has been developed up to a certain level but the personnel management system which is the superior structure has not been followed well. In this study, therefore, we show a method to determine the required amount of labor force for cargo handling considering the amount of cargo and type of cargo handling work per each cargo, and the optimal amount labor force in cope with the fluctuation of the basic cargo handling labor force with respect to the time of in and out cargo flow in the viewpoint of minimizing the expences due to reservation of extra labor force than needed and firing employment of labor force using the Dynamic Programming. The derived algorithm is introduced into the computer simulation for Pusan port with the analyzed real data such as amount of cargo handling in the port with respect to working hour, cargo capacity, working step, the ratio of cargo handling facility and actual number of workers and we estimated the required labor force. As a result of analysis the labor force of Pusan port showed the over-employment such as maximum 21.4%, minimum 8.2% when we assumed that the averages of actual working hours and days were 8 hours in a day and 20 day in a month.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.95-100
• /
• 2011

In general, thickness of bottom floor in fore/aft cargo hold region for container ship has been determined based on FEM analysis result of mid cargo hold region. But this approach has room for improvement because section shape and frame spacing in fore/aft cargo hold of container ship are quietly different from those of mid cargo hold. From this study, correlation between FEM result and grillage analysis result has been investigated and simple method for thickness determination of bottom floor in fore/aft cargo hold using newly improved grillage analysis is proposed.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.20-27
• /
• 2015

The juice carrier is the first ship built in korea. Special refrigerator system and cargo hold insulation with stainless steel tank were equipped on cargo hold. We studied optimum design of cargo hold insulation for reducing of ship building schedule and cost including good quality with refrigerating efficiency. From this study, general and newly specified juice carrier, technical method of cargo hold insulation system, air flow with division air wall, K-value calculation have been investigated.

• Journal of Korean Society of Transportation
• /
• v.29 no.6
• /
• pp.75-83
• /
• 2011

This research explores the relative importance of factors and service items that influence the air cargo service quality for provision services by the Skyteam Cargo in the Korean market. In general, the Skyteam Cargo provides a package of services which are different functions and operations of service such item as Equation Heavy (heavy and large express freight), Equation (small express freight), Variation (special freight), and Dimension (general freight). To carry out the research, the expert questionnaire survey, the Analytic Hierarchy Process (AHP) analysis had adopted to evaluate the level of quality for the provision air cargo operation services by the Skyteam Cargo at Incheon International Airport. Based on an expert survey and the AHP, five core service factors, namely, infrastructure as installed facilities, reliability, promptness, efficiency, and safety are defined.

• Journal of Korean Port Research
• /
• v.4 no.1
• /
• pp.3-20
• /
• 1990

The Port of Pusan, the largest port in Korea, handled 23% of total sea borne cargo movement, 14% of imported cargo, 58% of exported cargo and 95% of container cargo in 1989. Also the port of Pusan has been played a key role in handing container cargo throughout the last 10 years. The paper is aimed to survey the effect of sea borne cargo movement to urban transportation, that is, to find traffic volume arising by general/bulk cargoes through the port and to estimate vehicle rated of container tractor tailer on the roads between terminal including conventional piers and ODCY, and finally the following results are obtained. (1) AADV of truck to transport general/bulk cargoes are 6,322 units in 1989,and routes penetrate into the center of city and pass through the most of urban arterials. (2) In the container transport, if HVEF is adopted to 3 of tractor trailer, AVR in each transport freeway 13.7%. (3) IF HVEF is adopted to 6 of tractor trailer. AVR are as follows: BooDoo-Ro 44.1%, WooAm-Ro 39.3%, SooYoung-Ro 17.8%, Urban freeway 20.3%. Based upon these results, the following suggestions were drawn : o ODCY scattered around the city should be unified in a few groups to raise port productivity. o Rail service for inland container transportation should be escalated to relieve urban traffic congestion. o Coastal feeder service between terminal and hinterland should be studied to restrict the penetration of container tractor trailer into the central parts in the urban areas. o Exclusive freeway system for effective container transportation should be implemented to reduce urban traffic delay.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.175-179
• /
• 2023

This paper analyzes the vibration characteristics within the cargo compartment of a three-wheeled cargo bike when used on both regular roads and dedicated bicycle lanes. When cargo is loaded into the cargo compartment of a cargo bike and driven on the road, the shocks and vibrations transmitted from the ground can potentially affect the transported goods and even lead to product damage. As the vibration characteristics applied to the cargo compartment may vary depending on the condition of the road, vibration sensors were attached to the cargo bike's cargo compartment for data collection during operation on different road types. According to KS T ISO 13355 standards, the cargo bike can withstand vibrations within the range of 10 Hz to 60 Hz when operating on both bicycle lanes and regular roads. However, it is observed that there are peaks exceeding the profile in the frequency range of 3-6 Hz. In the 70-200 Hz range, the profile is exceeded on both regular roads and bicycle lanes, with a tendency for higher exceedance on bicycle lanes. The Grms value within the frequency range of KS T ISO 13355 is 5.926 m/s² (0.604 Grms). When operating on bicycle lanes with cargo, the Peak envelope optimization PSD value is 6.553 Grms, while on bicycle lanes, it is 7.708 Grms, indicating a difference of at least tenfold.

• IE interfaces
• /
• v.20 no.1
• /
• pp.21-32
• /
• 2007

This paper deals with the simulation model for A-Mart logistic center design and operations. In developed simulation model, receiving docks, conveyor sorter, conveyor system, shipping docks, material handling devices and manual sorting stations are considered. Three types of cargo such as transfer center cargo, distribution center cargo and supermarket cargo are considered. The simulation model and process animation are developed using the simulation package ARENA. Among various design and operation alternatives consisting of the number of workers of receiving dock, allocation of receiving docks by cargo types, conveyor sorter velocity, the number of folk-lift, the number of manual sorting operators and overall layout, the best alternatives of each subsystem are selected by simulation analysis. The major performance measures such as sorter throughput, utilization of operators at each station, receiving docks utilization and folk-lift utilization are considered for the alternative evaluation.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2009

The port, differently from general working place, is a closed area to execute security, customs, and quarantine procedures. The loading and unloading is being done differently by cargoes, ships, berths, and equipments. To load and unload a lot of equipments and different types of labor are required, in which work flow is very complicated. As above mentioned the port is very unique and deteriorated working place including danger. Now frequency of cargo handling accidents in port is highest for the second time among all industries. The purpose of this study is to propose ways to analyze and establish the preventive measure for cargo handling accidents in port. We have collected 45 accidents happened at Incheon Port during the period from 2007 to 2009. And the result of analysis, we proposed the new safety management system and safety education to reduce cargo handling accidents and to promote the quality of cargo handling in Incheon Port. Within the framework of effective safety management of cargo handling in port, this study will help to revise and establish system, education, and standard working manual with respect to the port loading and unloading system.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.35-45
• /
• 2004

This paper analyzes the differences in the service quality priorities of air cargo service providers and customers. After having identified what constitutes the decisive factors with regards to air cargo service quslity, research was carried out to evaluate the differences in the service quality priorities of air cargo service providers and customers. Moreover, this paper analyzes these differences by separating air cargo service providers into Korean and international air cargo service providers. In order to attain the objectives of this research, the air cargo service sectors were divided into three general categories: supply capability(H/W), service accountability, and competitiveness of service fees and management capability(S/W). The researchers then placed 6 different criteria into each service category, for a total of 18. The evaluation of the service quality priorities of air cargo service providers and customers revealed very little difference between these two groups. With regards to the service criteria found in each service category, our research found marked differences between the service quality priorities of providers and customers in only three of the 18 criteria. However, we found marked differences in service quality priorities in 7 of the 18 criteria when the air cargo service providers were divided into Korean and international air cargo providers. While domestic air cargo service providers evaluated management's capability to handle cargo accidents and incidents as the most important priority, international air cargo service providers placed the highest priority on the cargo rate system. The results of this research imply that in order to properly evaluate the differences between the service quality priorities of air cargo service providers and customers, the air cargo service providers itself should be separated between the Korean air cargo service providers and the foreign providers because of their respective inherent perception on service quality.