• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.299-308
• /
• 2009

We manufactured PVA-derived hydrogels using a foam generation technique that has been widely used to prepare colloidal gas aphrons(CGA). These gels were differentiated to the conventional gels such as for medical or pharmaceutical applications, which have tiny pores and some crystalline structure. Rather these should be used in de-pollution devices or adhesion of cells or biomolecules. The crosslinkers used in this work were amino acid, organic acid, sugars and lipids(vitamins). The structures of the gels were observed in a scanned electron microscope. Amino acids gels showed remarkably higher swelling ratios probably because their typical functional groups help constructing a highly crosslinked network along with hydrogen bonds. Boric acid and starch would catalyze dehydration while structuring to result in much lower water content and accordingly high gel content, leading to less elastic, hard gels. Bulky materials such as ascorbic acid or starch produced, in general, large pores in the matrices and also nicotinamide, having large hydrophobic patches was likely to enlarge pore size of its gels as well since the hydrophobicity would expel water molecules, thus leading to reduced swelling. Hydrophilicity(or hydrophobicity), functional groups which are involved in the reaction or physical linkage, and bulkiness of crosslinkers were found to be more critical to gel's cross linking structure and its density than molecular weights that seemed to be closely related to pore sizes. Microscopic observation revealed that pores were more or less homogeneous and their average sizes were $20{\mu}m$ for methionine, $10-15{\mu}m$ for citric acid, $50-70{\mu}m$ for L-ascorbic acid, $30-40{\mu}m$ for nicotinamide, and $70-80{\mu}m$ for starch. Also a sensory test showed that amino acid and glucose gels were more elastic meanwhile acid and nicotinamide gels turned out to be brittle or non-elastic at their high concentrations. The elasticity of a gel was reasonably correlated with its water content or swelling ratio. In addition, the PVA gel including 20% ascorbic acid showed fair ability of cell adherence as 0.257mg/g-hydrogel and completely degraded phenanthrene(10 mM) in 240 h.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.939-946
• /
• 1997

Effects of moisture content on the gelatinization and recrystallization of non-waxy and waxy rice starch gels were investigated by differential scanning calorimetry (DSC). The recrystallization rates of the starch gels containing various moisture contents $(40{\sim}70%)$ were analyzed by Avrami equation. The waxy rice starch had higher gelatinization temperature and enthalpy than non-waxy one. The highest degrees of recrystallization in both rice starch gels stored at $4^{\circ}C$ were shown at 40%, and recrystallizations above 80% moisture content were not found. The degree of recrystallization of waxy one was higher than that of non-waxy one in the range of 40 to 60% moisture content. The Avrami exponents (n) of both rice starch gels were near to 1.0 and the time constant (1/k) was increased with increasing moisture content in the range of 40 to 70% moisture content. The recrystallization rate of waxy rice starch gel was slower than that of non-waxy one. The recrystallization of rice starch gels could be explained by the change of ice melting enthalpy during storage. The Wg's, represented the maximum practical amount of plasticizing water, were about 29.9% and 28.2% for non-waxy and waxy rice starch gels, respectively.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.625-630
• /
• 1995

In order to know the effects of hot-water extracts of starches on gel formation and gel properties, some physicochemical properties and molecular distribution of the extracts were measured. Also, after acid-hydrolysis of starch gels and extract gels, extent of hydrolysis and $\overline{D.P}._n$, and molecular distribution of hydrolysis-residue were measured. Extraction ratio of grain starches (buckwheat, corn, rice, and wheat) were $4.0{\sim}6.6%$. The ratio of acorn and mungbean starches were 11.7 and 13.5%, respectively. Iodine affinity of the extracts was $17.2{\sim}17.7%$ in starches using for Mook, SM(acorn, buckwheat, and mungbean), $13.7{\sim}14.9%$ in starches not using for Mook, SNM(corn, rice, and wheat). Blue value was also higher in SM than in SNM. $\overline{D.P}._n$. of extracts of SM were bigger than those of SNM. In molecular distribution experiment, amylopectin fraction was not found from the extracts except rice starch extract. The extent of acid hydrolysis of the starch gels were $70{\sim}84%$ after 60 days, and the extent of the extract gels were $22{\sim}35%$. The extent of hydrolysis of starch gels and extract gels made with SM were lower than those of SNM.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.2
• /
• pp.99-103
• /
• 2010

Waxes, or long-chain hydrocarbons, may be obtained naturally from animals, vegetables, and mineral waxes, or may be synthesized. The oil-wax gels are widely applied to lots of cosmetics such as lipsticks. For example, the lipstick texture is strongly dependent on the glossiness of the oil-wax gels. Extensive research has been carried out to investigate the lattice structure of wax mixture in pure solvents (hydrocarbons) and defined mixtures. However, only a limited amount of work has been published on the lattice structure of wax matrixes in undefined mixtures. The objective of this study was to investigate the relationship between the lattice structure of ceresin wax and different wax mixtures and the glossiness of oil-wax gels. Recently visual factors such as the glossiness of skin are generally known as the words to express the beauty. The mechanism of glossiness has been suggested to understand the changes that occur in the lattice structure of the wax matrixes when they are forming gels and also the effects of the nature of solvent. The present work investigates the lattice structure of the wax matrixes and glossiness of oil-wax gels obtained from ceresin and microcrystalline wax as well as of the gels formed by different waxes in solvent.

• Korean journal of food and cookery science
• /
• v.15 no.4
• /
• pp.353-357
• /
• 1999

The textural characteristics of mungbean flour gels and mungbean cake(Bindaedduk) were investigated in steam and microwave reheating condition after 20$^{\circ}C$, 5$^{\circ}C$ and -18$^{\circ}C$ storage. The hardness of mungbean flour gels were 2.36 kg in microwave reheating and 3.59 kg in steam reheating after 6 days frozen storage, respectively and its gumminess were increased after reheating. The hardness of mungbean flour gels did not significantly change with the storage temperature. The textural characteristics of mungbean cake made with 2 parts of mungbean flour and 1/2∼1/8 parts of nonwaxy rice flour had the similar values in spite of the different compositions. Microwave reheated mungbean flour gels had the different hardness values of 4.13 kg in non package and 1.70 kg in polyethylene film wrap after 24 hours storage at 20$^{\circ}C$. In sensory evaluation mungbean flour gels showed the high scores in hardness and the unpleasant flavor after reheating but mungbean cake of different compositions showed the good sensory qualities.

• Biomolecules & Therapeutics
• /
• v.22 no.2
• /
• pp.161-165
• /
• 2014

The main purpose of this study was to develop a novel, in situ gel system for sustained delivery of ranitidine hydrochloride. Ranitidine in situ gels at 0.2%, 0.5%, and 1.0% gellan gum concentration (w/v) were prepared, respectively, and characterized in terms of preparation, viscosity and in vitro release. The viscosity of the gellan gum formulations in solution increased with increasing concentrations of gellan gum. In vitro study showed that the release of ranitidine from these gels was characterized by an initial phase of high release (burst effect) and translated to the second phase of moderate release. Single photon emission computing tomography technique was used to evaluate the stomach residence time of gel containing $^{99m}Tc$ tracer. The animal experiment suggested in situ gel had feasibility of forming gels in stomach and sustained the ranitidine release from the gels over the period of at least 8 h. In conclusion, the in situ gel system is a promising approach for the oral delivery of ranitidine for the therapeutic effects improvement.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.6
• /
• pp.437-443
• /
• 2009

To develop a topical bioadhesive formulation of clotrimazole for enhanced transdermal delivery, hydroxypropyl methylcellulose gel containing permeation enhancer was formulated and permeation studies were carried out. The release characteristics of the drug from the gel formulation were examined according to the receptor medium, drug concentration, and temperature. The rate of drug release from the gel increased with increasing drug concentration and temperature. The activation energy (Ea) of drug permeation, which was calculated from the slope of log P versus 1/T plots, was 14.41kcal/mol for a 1%(w/w) loading dose. The enhancer, such as saturated, unsaturated fatty acids, pyrrolidones, propylene glycol derivatives, glycerides, and non-ionic surfactants, were incorporated onto the gels to increase the amount of drug permeation into the skin. Among the enhancers used, polyoxyethylene 2-oleyl ether showed the highest level of enhancement. These results show that clotrimazole gels containing polyoxyethylene 2-oleyl ether could be used for the enhanced transdermal delivery of clotrimazole.

• YAKHAK HOEJI
• /
• v.40 no.4
• /
• pp.411-417
• /
• 1996

Epidermal growth factor(EGF), a potential healing agent for wounds and burns, has been formulated to topical gels with the hydrophilic polymers, Carbopol 934P. Physicochemical c haracteristics of the aqueous gels were evaluated by rheological properties and pH changes on storage. The gels were relatively stable at $4^{\circ}C$ and room temperature showing no changes in pH for two weeks, and revealed the rheogram of shear thinning plastic flow with the yield values in the range of 40 to 70dyne/$cm^2$. In vivo healing effects of different gel formulations have been compared with water-soluble and oleaginous ointments in full-thickness wound mouse model. The gel systems resulted in better wound healing effects than the other ointments. Furthermore, liposomal Carbopol gel has been developed by the addition of EGF-containing liposomal suspension into the Carbopol gel. The enhanced wound healing effects have been observed in the liposomal gel system, compared to the other gels and conventional ointments.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.6
• /
• pp.672-676
• /
• 1992

Retrogradation properties of cowpea and mung bean starch gels were investigated by rate of retrogradation, X-ray diffraction patterna and syneresis of gels. Retrogradation time constant of mung bean starch gel(30%) by Avrami equation had a similar value to that of cowpea starch gel. X-ray diffraction patterns of the two retrograded starch gels(10%) were B-type. The extent of retrogradation determined by syneresis showed that cowpea starch gel was a little larger than that of mung bean starch gel(6~10%).

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.66-78
• /
• 1998

the microstructure and mechanical properties of seeded and ball-milled dry gels prepared by boehmite sol-gel method were discussed. The densification of seeded gels was improved with increasing seed content namely the number of seed The number of seed was 1.09, 3.35, 5.72${\times}$1012/cm3 boehmite when seeded with 1, 3, 5wt% respectively The ball milled gel contained about 0.5wt% seed and the number of seed was 4.72${\times}$1012/cm3 boehmite. The sintered density of 5wt% seeded gel was below 80% when sintered at 1300$^{\circ}C$ for 1h. On the other hand that of ball milled gel was very improved and reached to 97% In the case of 3wt% seeded gels the density over 97% was attained when sintered at 1500$^{\circ}C$for 1h. and the grain of the sintered body was several micrometers in size. However the sintered body of ball milled gel showed grain size of submicrometer when sintered at 1300$^{\circ}C$ for 1h. And this specimen showed highest harness value of 1900kg/mm2 The fracture toughness increased with increasing sintering temperature. The sintered body of ball milled gel showed the largest grain size and the highest fracture toughness without regard to sint-ering temperature.