• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.765-769
• /
• 2001

Starches of flavored glutinous rice were analyzed by using scanning electron microscope (SEM) and differential scanning calorimetry (DSC) and tested on the starch granule susceptibility to 15% H$_2$SO$_4$, glucoamylase and $\alpha$-amylase. The shape of starch granules form flavored glutinous rice varieties was polygonal and the size was 4~6 $\mu$m in diameter. According to DSC, glutinous rice starch showed onset temperature (T$_{o}$) range 59.8~62.5$^{\circ}C$ and KR92021-B-B-42-3-B and KR92021-B-B-165-1-B showed higher enthalpy ($\Delta$H) on gelatinization than others. The starches from KR92021-B-B-5-2-B and KR92021-B-B-42-3-B showed lower hydrolysis rate using 15% H$_2$SO$_4$ than KR92021-B-B-165-1-B. KR92021-B-B-5-2-B showed higher degree of hydrolysis of glucoamylase and $\alpha$-amylase than the others.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.3
• /
• pp.387-395
• /
• 2009

This study was conducted to investigate the effects of starch concentrations and heating conditions on the gel characteristics of arrowroot starch. Arrowroot starch gels with various pHs, and starch concentrations, were prepared using different temperatures and heating times, and then stored for 24 hrs at $4^{\circ}C$. The hardness of sample gels made at pH 2.0 and 4.0 increased as the starch concentration increased from 7% to 10%, with the maximum value of 94 N being obtained when the gel was prepared at pH 4.0 with a starch concentration of 10%. The maximum hardness of samples prepared with concentrations of starch ranging from 7~9% appeared at $80^{\circ}C$, regardless of the heating temperature and time. Furthermore, the hardness of samples prepared at greater than $100^{\circ}C$ was relatively lower than that of samples prepared at other temperatures. When a starch concentration of 8% was used, the degree of gelatinization(DR) increased as the heating temperature increased, with the maximum value of DR being about 76% at $120^{\circ}C$, regardless of heating time. After storage for 24 hrs, the hardness of samples prepared at $70^{\circ}C$, $80^{\circ}C$ and $90^{\circ}C$ appeared to decrease, while that of samples prepared at $100^{\circ}C$, $110^{\circ}C$ and $120^{\circ}C$ increased. The correlation between hardness and the degree of gelatinization or retrogradation was very high when samples were prepared at $80^{\circ}C$ with a starch concentration of 9%, as indicated by a correlation coefficient of greater than 0.95. Overall, the microstructures of freeze-dried arrowroot starch gel were composed of a continuous network of amylose and amylopectin with fragmented ghost structures in an excluded phase, but these ghost structures were more evident after storage and with increased heating temperature.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.2
• /
• pp.170-177
• /
• 1997

Two experiments were conducted to evaluate the effects of different extrusion conditions of corn and soybean meal on physico-chemical properties, ileal digestibility of amino acid and growth performance in weaned pigs. In Expt. 1, to compare physico-chemical properties and ileal digestibility of extruded corn and soybean meal, ground corn (2 mm screen) and soybean meal were separately extruded in four different conditions: (1) no preconditioning, low water supply (3.0 l/min) (NCLW), (2) no preconditioning, high water supply (7.0 l/min) (NCHW). (3) preconditioning (steam 3.0 l/min) with low water supply (3.0 l/min) (CLW), and (4) preconditioning (steam 3.0 l/min) plus high water supply (7.0 l/min) (CHW). Twenty-five cannulated pigs ($L{\times}Y{\times}D$, 7.62 kg BW for soybean meal, 8.80 kg BW for corn) were employed to determine nutrients digestibility of the extruded feedstuffs. In Expt. 2, a total of 90 pogs ($L{\times}Y{\times}D$, 9.18 kg BW) were used for a 28 d feeding trial to compare growth performance of pigs as affected by different extrusion conditions. Before mixing, corn and soybean meal were blended and extruded by the same conditions as described in Expt. 1. corn extruded with NCLW showed the highest (p < 0.05) degree of gelatinization (DG), compared to the lowest values observed for NCHW. Extrusion of corn with preconditioning (CLW and CHW) increased (p < 0.05) the DG as compared to the extrusion condition of NCHW. Extruded SBM with NCLW showed the lowest (p < 0.05) degree of texturization among treatments. The ileal digestibility of GE in SBM was higher with NCHW and CHW as compared to NCLW. The ileal digestibility of CP was lower in extruded corn, but was higher in extruded SBM, compared to untreated sample. Lysine digestibility of extruded corn (except corn with NCHW) was in general significantly improved. Extrusion of SBM resulted in no improvements in ileal digestibility of amino acids, but extruded SBM with NCLW had lower lysine digestibility compared to other treatments. In growth responses, pigs fed a diet with CLW had higher, but not significant, average daily gain (ADG) than other treatments during first 2 weeks. From d 15 to 28, pigs fed a diet with CHW had significantly less (p < 0.05) average daily feed intake (ADFI) than others except NCHW. In conclusion, the proper extrusion condition for corn and SBM in terms of ileal digestibility of amino acids and growth performance of weaning pigs seems to be the combination of preconditioning and a low water supply (3.0 l/min).

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.62-67
• /
• 1991

The characteristics of Tongjinbyeo(Japonica) and Samgangbyeo($J{\times}Indica$) rice starches including physicochemical properties, differential scanning calorimetry and enzymatic digestion of lintnerized starches were investigated. Degree of hydrolysis of Tongjinbyeo starch with 2.2N HCI for 48 hr was higher than that of Samgangbyeo starch. Apparent first order reaction of starches was slow reaction for first period, and fast reaction second period on the datum point of acid treatment 24 hr. Absorbance at ${\lambda}_{max}$ and 680 nm, and ${\lambda}_{max}$ of iodine stained starch and amylose content decreased upon acid treatment. But water binding capacity, swelling power and solubility considerably increased as hydrolysis progressed. Relative crystallinity of two starches increased with acid treatment, and that of Tongjinbyeo starch was higher than that of Samgangbyeo starch. Differential scanning colorimetry(DSC) data continuously decreased for lintnerization periods, and those of Tongjinbyeo starch have higher than those of Samgangbyeo starch. The onset temperature of starch by DSC continuously decreased by treatment, but conclusion temperature increased until 24 hr and then decreased. The enthalpy for gelatinization decreased for both starches. Degree of hydrolysis of lintnerized Tongjinbyeo starch with glucoamylase was slightly higher than that of Samgangbyeo starch.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.235-240
• /
• 1991

Starch phosphates were prepared from the corn starch mixed with 2% sodium tripolyphosphate by twin-screw extruder with a feed rate of 20 kg/hr and an extrusion temperature of $130^{\circ}C$, and the effects of extrusion variables on the physicochemical properties (target parameters) of starch phosphates were investigated. Interrelations of system parameters (specific mechanical energy and extrudate moisture) and rheological properities of starch was analyzed by using the response surface analysis. Degree of substitution (DS) was increased with increasing the feed moisture, and showed the maximum value at the screw of near 250 rpm, Degree of gelatinization was proportionally increased with increasing the screw speed and decreasing the feed moisture. Apparent viscosity of the paste was increased with increasing the feed moisture, but it was not significantly affected by the screw speed. It was found by scanning electron microscopy that the starch microgranules were much more degradaded, and as consequent result, the intrinsic viscosity was decreased, whereas, water solubility index was increased. The rate of retrogradation of the gels was retarded with increasing DS and decreasing viscosity.

• Korean journal of food and cookery science
• /
• v.3 no.1
• /
• pp.31-36
• /
• 1987

The purpose of this study is to investigate the physicochemcal Properties of the cowpea crude and refined starch and to present the basic data for physicochemical factor which gives the properties of Mook to cowpea starch gel. Water binding capacity of crude starch was 235. In and that of refined starch was 186.0%. The pattern of change in swelling power and solubility for increasing temperature started to increase at $60^{\circ}C$ and increased rapidly from $70^{\circ}C$, for both of crude and refined starch. The optical transmittance of 0.2% crude and refined starch suspensions were increased from $65^{\circ}C$ and showed rapid increasement during 68~$80^{\circ}C$, and their curves showed two-stage processes. The gelatinization pattern for 6n crude and refined starch suspensions were investigated by the Brabender amylograph. The corves showed the pasting temperature of $72.0^{\circ}C$ and $72.1^{\circ}C$, peak height of 11303.U. ($88.0^{\circ}C$) and 970 B.U. ($83.5^{\circ}C$) for crude and refined starch, respectively, and both showed high viscosities when cooling. Blue values for crude and refined starch were 0.369 and 0.376 respectively. Alkali number of crude and refined starch were 7.77 and 7.34, and reducing values were 3.60 and 2. 10, respectively. Amylose content of cowpea starch was 33.7%. Periodate oxidation of the starch fractions resulted that amylose had the average molecular weight of 23590, degree of polymerization of 146 and amylopectin had the degree of branching of 3.42, glucose unit per segment of 29.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.42-48
• /
• 1998

Physicochemical properties of waxy maize starch and oxidized waxy maize starch with sodium hypochlorite $(0{\sim}60\;mg\;CL_2/g\;starch,40^{\circ}C,\;pH\;10,\;3.0\;hr)$ were studied. As sodium hypochlorite concentration was increased, the content of crude lipid and crude protein of the oxidized starch were decreased. And crude protein content and whiteness was considered to show negative regression. However, the crude ash content of the oxidized starch increased significantly with oxidation and bore a positive regression to the chlorine content. There was a progressive increase in the carboxyl content with increasing oxidant level. After pasting in hot water and cooling, viscosity of the oxidized starches were drastically lower than that of native starch . As carboxyl contents of the oxidized starch increased, the solubility and swelling power was increased. When waxy maize starch treated with 0, 1.5, 3.0 and 6.0% sodium hypochlorite, temperature of initial gelatinization of oxidized starch was shown to 65, 65, 60 and $50^{\circ}C$, respectively. The oxidized waxy maize starches also form clearer pastes. Water binding capacity of the oxidized starch decreased as the degree of carboxyl group substitution increased. Waxy maize starch has polygonal and some round granules which range from about 3.7 to $20\;{\mu}m$ in diameter. Surface appearance of the waxy maize starch became rough when oxidized with sodium hypochlorite. When homogenate of the oxidized waxy maize starch solution and corn germ oil was stored under room temperature for 24 hours, the emulsion stability was considered to depend on starch concentration and degree of substitution.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.551-556
• /
• 2015

Iksan370 is a long-spike wheat developed by the Rural Development Administration yielding excellent features components such as cold resistance, disease resistance, and viviparous germination. The physicochemical and material properties of the raw wheat and milled flour of Iksan370 were analyzed to derive its appropriate uses. The raw wheat of Iksan370 showed high contents of ash and proteins at 1.71% and 13.7%, respectively. Its test weight of 763.0 g/L was similar to those of other varieties and its 1,000 kernel weight was high at 45.38 g. The milled flour of Iksan370 had an ash content of 0.45%, which corresponds with a class 1 flour, and its protein content is 12.18%, corresponding with strong flour. The damaged starch was 5.41%, which was lower than that of other varieties. The average grain size was $70.67{\mu}m$ and the grain distribution was at the level of a typical hard wheat. In the farinogram, the water absorption was 58.63%, which corresponded to the level of medium flour. The development time was 7.00 minutes, which was significantly lower than those of Jokyung and Keumkang. The degree of softening was 67.00 BU, similar to those of Yunbaek and Baekjoong. Among the physico-chemical characteristics, the high protein content and typical hard wheat grain distribution of Iksan370 were similar to those of strong wheat, usually used for bread making. However, in the farinogram, the dough development time was short and the degree of softening was high. As a result, Iksan370 was expected to have poor breadmaking properties and a small volume of the final bread product due to insufficient dough durability. On the other hand, Iksan370 showed the highest maximum gelatinization viscosity at 864.00 BU. Therefore, Iksan370 is expected to show glutinous texture when used for noodles and its flour appears to be appropriate for frying powders as well.

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.705-713
• /
• 2010

This study was carried out to investigate the physicochemical properties of bread dough with added mulberry leaf powder. The crude protein, fiber and ash contents of the mulberry leaf powder were 21.25%, 7.70% and 9.27% respectively. The mulberry leaf-mixed powder showed low lightness and redness values and high yellowness. Farinograph water absorption increased as the mulberry leaf powder content increased. Both arrival and development times of the mulberry leaf powder-added dough were longer than those of wheat flour dough. As the mulberry leaf powder content increased, the degree of weakness increased. Maximum viscosity by amylograph analysis increased gradually with the addition of mulberry leaf powder, while gelatinization temperature was not affected. Degree of extension decreased as shown in extensograph analysis with increasing content of mulberry leaf powder.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.182-188
• /
• 2004

This study was carried out to investigate nutritional composition and physicochemical properties of waxy(WGR) and nonwaxy(NWGR) germinated brown rice. Amylose contents of WGR(moisture content 15.45 %) and NWGR (moisture content 15.02%) were 4.9% and 17.9%. Reducing sugar of those were 4.91% and 2.28%. The free sugar contents of WGR were glucose 0.42%, sucrose 0.15%, maltose 0.27% and that of NWGR were glucose 0.59%, sucrose 0.50%, maltose 0.24%, respectively. Color value of WGR and NWGR were L=60.30, a=2.12, b=23.52 and L=59.51, a=3.15, b=23.04, respectively. Degree of gelatinization of WGR and NWGR were 7.67%, 5.21% and hardness of WGR and NWGR were 7.53 kg$\_$f//$\textrm{cm}^2$, 8.93 kg$\_$f//$\textrm{cm}^2$. Vitamin E contents of those were 271.8 $\mu\textrm{g}$/kg, 310.6 $\mu\textrm{g}$/kg and total dietary fiber contents of those were 4.21%, 3.17%. Total amino acids of brown rice, nonwaxy germinated brown rice and cooked germinated brown rice were 126.8 mg/l00 g, 90.8 mg/l00 g and 106.5 mg/l00 g, respectively. Among amylogram characteristics of WGR and NWGR, initial gelatinization temperature, peak viscosity, breakdown, setback were 42$^{\circ}C$, 498 B.U., 94 B.U., -48 B.D. and 70$^{\circ}C$, 212 B.D., 0 B.D., 123 B.D., respectively. Sensory properties of germinated brown rices were affected by color and flavor. Palatability score of WGR that intensity score of color and flavor were lower than that of NWGR showed high.