• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.29-34
• /
• 2016

Nd-doped $BiFeO_3$ materials were synthesized via a sol-gel method. The crystal structure, magnetic properties, and complex impedance spectroscopy of multiferroic $Bi_{1-x}Nd_xFeO_3$ (BNFO) materials were investigated by X-ray diffraction (XRD), Raman scattering, vibrating sample magnetometer (VSM), and complex impedance spectroscopy. Our results show that the lattice crystal constants (a, c) and the ratio c/a of BNFO materials decreased with increasing Nd concentration. All samples exhibited weak ferromagnetism at room temperature, and the magnetization of samples was enhanced by the presence of $Nd^{3+}$ ions. There was an enhancement in the spontaneous magnetization of BFO with increasing Nd concentration, which is attributable to the collapse of the spin cycloid structure.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.438-439
• /
• 2006

Pure and stable YAG $(Y_3Al_5O_{12})$ powders were synthesized by a PVA (polyvinyl alcohol) polymer solution technique. PVA was used as an organic carrier for the precursor ceramic gel. The precursor gels were crystallized to YAG at relatively a low temperature of $900\;^{\circ}C$. The synthesized powders, which have nano-sized primary particles, were soft and porous, and the porous powders were ground to sub-micron size by a simple ball milling process. The ball-milled powders were densified to 94% relative density at $1500\;^{\circ}C$ for 1h. In this study, the characteristics of the synthesized YAG powders were examined.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.65-66
• /
• 2006

Solubility of single wall carbon nanotubes (SWNTs) has been determined in various dispersing media by using the solvent parameters such as Kamlet-Taft parameter and 3-dimensional parameters. Nitric acid-treated SWNTs exhibit significantly improved solubility in hydrogen bondable solvents as well as in solvent mixtures. The forming bucky gel with ionic liquid allows for the new group of dissolving solvent. The dissolution behavior of SWNTs provides a route for SWNT dispersion/exfoliation in preparing electrically conductive films such as transparent electrode.

• Korean Journal of Materials Research
• /
• v.7 no.6
• /
• pp.529-535
• /
• 1997

Li ion전지용 LiMn$_{2}$O$_{4}$분말을 졸-겔법과 고상반응법으로 제조하여 분말의 특성과 전지의 특성을 비교하였다. 졸-겔법에 의해 제조된 LiMn$_{2}$O$_{4}$분말은 고상반응법에 의해 제조된 분말보다 낮은 온도에서 합성이 가능하고, 균질하고 작은 입자들로 구성되었으며, Li stoichiometry가 우수하여 전지의 방전용량이 크나 양이온 혼합도가 높아 전지의 내부저항이 크게 나타났다. 졸-겔법은 높은 Li stoichiometry와 균질한 입자 크기를 갖는 LiMn$_{2}$O$_{4}$분말 제조에 적당한 것으로 생각되며, 전지의 내부저항 문제는 분말의 하소온도와 냉각속도의 조절에 의해 가능할 것으로 판단된다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.67-68
• /
• 2023

This paper reports on the synthesis of paraffin-based phase change materials (PCMs) designed for use in solar reflective paint (SRP) as a thermal energy storage (TES) medium. These PCMs are prepared using the sol-gel process and are encapsulated in silica. The focus of this research is to evaluate the suitability of these synthesized PCMs for efficient thermal energy storage within SRP applications. The obtained PCMs have nanometric dimensions, which make them well-suited for integration into paint formulations. The study also includes a thorough analysis of the chemical, thermal, and structural stabilities of these materials, confirming their applicability in solar reflective paint.

• Korean Journal of Materials Research
• /
• v.28 no.12
• /
• pp.714-718
• /
• 2018

Anti-reflection thin films are fabricated on glass substrates using the screen printing method. Tetra ethyl silicate(TEOS) and methyl tri methoxy silane(MTMS) are used as starting materials and buthyl carbitol acetate(BCA) and buthyl cellusolve(BC) are mixed to improve the viscosity of the solution. Anti-reflection thin films are fabricated according to the number of the screen mesh and the characteristics improve as the mesh size increases. The transmittance and reflectance of the coated thin film using 325 mesh are about 94 % and 0.43 % in the visible wavelength. The thickness and refractive index of the AR thin film are 107 nm and n = 1.26, respectively.

• KSBB Journal
• /
• v.19 no.5
• /
• pp.368-373
• /
• 2004

The optimal condition for the production of a glucan and a fructan synthesizing enzymes from Leuconostoc mesenteroides NRRL B-1149 were studied based on the different medium compositions. Response surface methodology was applied to find the optimistic condition showing the relationship between the fermentation response (enzyme activities) and the fermentation variable concentrations of yeast extract, peptone concentration, K2HP04 concentration and sucrose. Optimum medium composition for both enzymes production was $0.75\%$ yeast extract, $0.72\%$ peptone, $1\%$ K2HP04 and $2.17\%$ sucrose. Using this medium, the activities produced in culture was 0.90 U/m~ for glucosyltransferase (GTase) and 0.96 U/ml for fructosyltransferase (FTase). After purification of 1149FTase by consecutive chromatographies using Sephadex G-150 and DEAE-Sepharose, a 1149FTase of 210 kDa on $7\%$ polyacrylamide gel was isolated and it synthesized soluble fructan. The 1149GTase showed a band of 180 kDa on $8\%$ polyacrylamide gel after purification using Bio-Gel P-100 gel chromatography and DEAE-Sepharose ion exchange chromatography and it synthesized insoluble glucan. The linkages of polymers were determined by methylation using Hakomori reagent and following NMR analysis. The glucan was composed of a(1~6) and a(1~3) linkages and the fructan was levan.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.307-314
• /
• 1998

PZT thin films were fabricated by the Sol-gel method. Starting materials used for the preparation of the stock solution were Pb-acetate trihydrate, Zr-normal propoxide and Ti-isopropoxide. 2-Methoxyethanol and iso-propanol were used for solution. For studying the diffusion of Pb ion into the substrates. We used bare Si substrate, $SiO_2/Si$ substrates which was produced by thermal oxidation and $TiO_2/SiO_2/Si$ which was mad by Sol-gel method. Densification and adhesion of thin films were observed by SEM. Phase formation of thin films and diffusion of Pb ion into the substrate were examined by XRD and ESCA, respectively. In the case of bare Si and $SiO_2/Si$ substrate, we obtained the perovskite phase at $700^{\circ}C$ and restricted a little the diffusion of Si ion into the film with $SiO_2$ buffer layer. In the case of $TiO_2/SiO_2/Si$, perovskite phase were obtained at $500^{\circ}C$ and the diffusion of Pb ion and Si ion were restriced.

• International Journal of Concrete Structures and Materials
• /
• v.1 no.1
• /
• pp.75-81
• /
• 2007

The concrete pavement of the Seohae Highway in Korea has suffered from serious distress, only four to seven years after construction. Deterioration due to Alkali-Silica Reaction (ASR) has seldom been reported per se in Korea, because the aggregate used for the cement concrete has been considered safe against alkali-silica reaction so far. The purpose of this study is to examine the deterioration caused by an alkali-silica reaction of concrete pavement in Korea. The investigation methods included visual inspection and Automatic Road Analyzer (ARAN) analysis of surface cracks, coring for internal cracks, stereo microscopic analysis, scanning electronic microscope (SEM) analysis, and electron dispersive X-ray spectrometer (EDX) analysis. The results are presented as follows: the crack pattern of the concrete pavement in Korea was longitudinal cracking, map cracking or D-cracking. Local areas of damage were noticed four to five years after construction. The cracks started from edges or joints and spread out to slabs. The most intensive cracking was observed at the intersection of the transverse and longitudinal joints. Where cracking was the most intense, pieces of concrete and aggregate had spalled away from top surface and joint interface area. The progress of deterioration was very fast. The reaction product of alkali-silica gel was clearly identified by its generally colorless, white, or very pale yellow hue seen through a stereo optical microscopy. The typical locations of the reaction product were at the interface between aggregate and cement paste in a shape of a rim, within aggregate particles in the cracks, and in the large void in the cement paste. Most of the white products were found at interface or internal aggregates. SEM and EDX analysis confirmed that the white gel was a typical reaction product of ASR. The ASR gel in Korea mainly consisted of Silicate (Si) and Potassium (K) from the cement. The crack in the concrete pavement was caused by ASR. It seems that Korea is no longer safe from alkali-silica reaction.

• KSBB Journal
• /
• v.29 no.3
• /
• pp.183-187
• /
• 2014

Sick-building syndrome occurs when indoor air is polluted with harmful volatile organic compounds such as formaldehyde which are contained in furniture or new building materials. In this study, formaldehyde-shielding chitosangel sheet was developed and its performance was evaluated. Chitosan and agar were dissolved in acetic acid solution. The optimal concentrations of chitosan, acetic acid and agar were 3, 3, and 2.5 %(w/w). Formaldehyde was spreaded on gypsum board and then wall paper was attached on it by using glue. When chitosan-gel sheet was attached on this control board, the amount of formaldehyde released from the board was decreased by 63% than in control board. On the other hand, decrease in formaldehyde releasing was only 32% when liquid solution of chitosan was spreaded on the control board. This result clearly indicates that chitosan-gel sheet removes formaldehyde more effectively than liqud solution of chitosan. Furthermore, this type of sheet is more applicable to new building than spraying type.