• Journal of Wellbeing Management and Applied Psychology
• /
• v.4 no.4
• /
• pp.15-25
• /
• 2021

Purpose: The purpose of this study is to form a new cosmetic market through the development of a composition with high skin permeability after adding omega 3 to Aloe Vera soothing gel products. Research design, data and methodology: In this study, omega-3 fatty acids were added to cosmetic products in the form of soothing gels. By applying nanoparticle technology to rapidly increase the penetration of raw materials into the skin, characteristics related to skin moisture and regeneration were determined. Omega-3 was used as a raw cosmetic material. Then 5% and 15% nanoparticle aqueous products containing omega-3 were prepared. The developed water hydrate was subjected to skin permeability test using artificial skin. Results: 53 hours of artificial transdermal penetration of the developed composition, the ethanol-based omega-3 containing nanoparticle solubilized raw material was about three times higher penetration than the ethanol-based omega-3 containing nanoparticle solubilized raw material. Conclusions: The raw material product (SR-1901) containing 5% of omega-3 nanoparticle water hydrate has skin regeneration ability and pain reduction effect. It can be expected that the skin cosmetics market will be reorganized into a new distribution structure and opportunity through omega-3 supplemented soothing gel cosmetics with improved efficacy than existing cosmetics.

• The Journal of Korea Robotics Society
• /
• v.16 no.1
• /
• pp.41-48
• /
• 2021

In this paper, we review papers which report to the all solid-state electroactive polymer-based tunable lens. Since electroactive polymer-based tunable lenses change their focal length by responding to electric stimuli, it can be minimized the size and weight of optical modules. Thus, it has been received attention in the robot, mobile device and display industry. The all solid-state electroactive polymer-based tunable lenses can be classified into two categories depending on the classification of materials: ionic electroactive polymer-based lenses and non-ionic electroactive polymer-based lenses. Most of the ionic electroactive polymer-based tunable lenses are fabricated with ionic polymer-metal composite. So, the ionic electroactive polymer-based tunable lenses can be operated under low electric voltage. But small force, slow recovery time and environmental limitation for operation has been pointed to the disadvantage of the lenses. The non-ionic electroactive polymer-based tunable lenses are classified again into two categories: dielectric polymer-based tunable lenses and polyvinylchloride gel-based tunable lenses. The advantage of the dielectric polymer-based tunable lenses is fast response to electric stimuli. But the essential flexible electrodes degrade performance of the lens. Polyvinylchloride gel-based tunable lens has reported impressive performance without flexible electrodes.

• Advances in nano research
• /
• v.14 no.4
• /
• pp.355-362
• /
• 2023

Physical exercise, especially intense exercise and high intensity interval training (HIIT) by trampoline, can lead to muscle injuries. These effects can be reduced with intelligent products made of nanocomposite materials. Most of these nanocomposites are polymers reinforced with silicon dioxide, alumina, and titanium dioxide nanoparticles. This study presents a polymer nanocomposite reinforced with silica. As a result of the rapid reaction between tetraethyl orthosilicate and ammonia in the presence of citric acid and other agents, silica nanostructures were synthesized. By substituting bis (4-amino phenoxy) phenyl-triptycene in N, N-dimethylformamide with potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C, the diamine monomer bis (4-amino phenoxy) phenyl-triptycene is prepared. We synthesized a new polyaromatic (imide) with triptycene unit by sol-gel method from aromatic diamines and dianhydride using pyridine as a condensation reagent in NMP. PI readily dissolves in solvents and forms robust and tough polymer films in situ. The FTIR and NMR techniques were used to determine the effects of SiO₂ on the sol-gel process and the structure of the synthesized nanocomposites. By using a simultaneous thermal analysis (DTA-TG) method, the appropriate thermal operation temperature was also determined. Through SEM analysis, the structure, shape, size, and specific surface area of pores were determined. Analysis of XRD results is used to determine how SiO₂ affects the crystallization of phases and the activation energy of crystallization.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.955-962
• /
• 2016

Fish-meat gel is an intermediate product used in a variety of surimi-based seafood. One of the most-used raw materials of fish-meat gel is Alaska Pollock due to its high-quality meat in terms of gel strength and texture. However, increasing demand for fish-meat gel, along with overexploitation of the wild catch Alaska Pollock, has put the industry in need of low-cost sustainable alternative sources for fish-meat gel. Pagrus major (PM) is a widely aquacultured fish known for having white meat that is low in fat. The current study compares the quality of fish-meat gel prepared from aquacultured PM to that of high and mid-grade Alaska Pollock fish-meat gel. Gels were compared in terms of gel strength, texture, color, and protein pattern. Results indicated that fish-meat gels prepared from PM were superior to Alaska Pollock fish-meat gels with regard to gel strength, hardness, springiness, chewiness, cutting strength, and breaking force. In addition, although not matching in quality, PM exhibited a cohesiveness, whiteness, and expressible moisture content comparable to Alaska Pollock of both grades. Protein pattern analysis also showed that PM and Alaska Pollock fish-meat gels had similar protein profiles before and after gel preparation. Therefore, P. major is suggested as a potential substitute for Alaska Pollock in fish-meat gel production.

• Korean Journal of Materials Research
• /
• v.22 no.6
• /
• pp.298-302
• /
• 2012

Fe/$SiO_2$ core-shell type composite nanoparticles have been synthesized using a reverse micelle process combined with metal alkoxide hydrolysis and condensation. Nano-sized $SiO_2$ composite particles with a core-shell structure were prepared by arrested precipitation of Fe clusters in reverse micelles, followed by hydrolysis and condensation of organometallic precursors in micro-emulsion matrices. Microstructural and chemical analyses of Fe/$SiO_2$ core-shell type composite nanoparticles were carried out by TEM and EDS. The size of the particles and the thickness of the coating could be controlled by manipulating the relative rates of the hydrolysis and condensation reaction of TEOS within the micro-emulsion. The water/surfactant molar ratio influenced the Fe particle distribution of the core-shell composite particles, and the distribution of Fe particles was broadened as R increased. The particle size of Fe increased linearly with increasing $FeNO_3$ solution concentration. The average size of the cluster was found to depend on the micelle size, the nature of the solvent, and the concentration of the reagent. The average size of synthesized Fe/$SiO_2$ core-shell type composite nanoparticles was in a range of 10-30 nm and Fe particles were 1.5-7 nm in size. The effects of synthesis parameters, such as the molar ratio of water to TEOS and the molar ratio of water to surfactant, are discussed.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.spc8
• /
• pp.3017-3021
• /
• 2011

Two chiral stationary phases (CSPs) based on (3,3'-diphenyl-1,1'-binaphthyl)-20-crown-6 bonded covalently to silica gel were applied for the first time to the resolution of racemic vigabatrin and its analogue ${\gamma}$-amino acids and the resolution results were compared to those on the commercially available Crownpak CR(+) based on (3,3'-diphenyl-1,1'-binaphthyl)-20-crown-6 coated dynamically onto octadecylsilica gel. While vigabatrin was not resolved at all on Crownpak CR(+), it was resolved quite well on the two CSPs. Among four vigabatrin analogue ${\gamma}$-amino acids, only two were resolved on Crownpak CR(+), but three were resolved on the CSP (CSP 1) containing residual silanol groups and all of four were resolved on the CSP (CSP 2) containing residual silanol group-protecting n-octyl groups. The improved lipophilicity in CSP 2 was proposed to be responsible for its superiority to CSP 1 for the resolution of vigabatrin and analogue ${\gamma}$-amino acids. In addition, the composition of aqueous mobile phase was found to affect the chiral recognition behaviors for the resolution of vigabatrin and analogue ${\gamma}$-amino acids on CSP 2.

• Journal of Applied Biological Chemistry
• /
• v.57 no.4
• /
• pp.295-299
• /
• 2014

The mulberry (Morus alba L.) root barks were extracted with 80% aqueous methanol at room temperature. The concentrated extract was partitioned as ethyl acetate (EtOAc), n-BuOH, and $H_2O$ fractions. From the EtOAc fraction, five triterpenoids were isolated through the repeated silica gel and octadecyl $SiO_2$ column chromatographies. According to the results of physico-chemical and spectroscopic data including nuclear magnetic resonance, mass spectrometry, and infrared, the chemical structures of the triterpenoids were respectively determined as ${\alpha}$-amyrin (1), ${\alpha}$-acetyl amyrin (2), lupeol (3), betulinic acid (4), and glutinol (5). Compounds 1, 3, and 5 were isolated for the first time from the mulberry root bark.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.1001-1006
• /
• 2002

Bond strength of $SrZrO_3$ resistive oxide barrier on Ag sheathed Bi(2223) tapes prepared by the sol-gel and dip-coating method was evaluated with an aid of Taguchi method and $L_18(2^1{\times}3^7)$ orthogonal arrays to determine the optimal process combination of levels of factors that best satisfy the bigger is better quality characteristic. The observed optimal condition is as follows: Sr/Zr mol ratio(0.3/0.7), amount of organic vehicle(5 wt%), drying temperature and time(160${\circ}C$, 10 min), heat treatment temperature and time(500${\circ}C$, 20 min), respectively. ANOVA analysis suggested that the influence of the factors within ${\alpha}$=0.1 was significant with a 90% confidence level.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.741-746
• /
• 2019

New triple tungstate phosphors NaPbLa(WO₄)₃:Yb³⁺/Ho³⁺ (x = Yb³⁺/Ho³⁺ = 7, 8, 9, 10) are successfully fabricated by microwave assisted sol-gel synthesis and their structural and frequency upconversion (UC) characteristics are investigated. The compounds crystallized in the tetragonal space group I4₁/a and the NaPbLa(WO₄)₃ host have unit cell parameters a = 5.3927(1) and c = 11.7961(3) Å, V = 343.05(2) ų, Z = 4. Under excitation at 980 nm, the phosphors have yellowish green emissions, which are derived from the intense ⁵S₂/⁵F₄→⁵I₈ transitions of Ho³⁺ ions in the green spectral range and strong ⁵F₅→⁵I₈ transitions in the red spectral range. The optimal Yb³⁺:Ho³⁺ ratio is revealed to be x = 9, which is attributed to the quenching effect of Ho³⁺ ions, as indicated by the composition dependence. The UC characteristics are evaluated in detail under consideration of the pump power dependence and Commission Internationale de L'Eclairage chromaticity. The spectroscopic features of Raman spectra are discussed in terms of the superposition of Ho³⁺ luminescence and vibrational lines. The possibility of controlling the spectral distribution of UC luminescence by the chemical content of tungstate hosts is demonstrated.

• Journal of the Korean Ceramic Society
• /
• v.41 no.2
• /
• pp.151-157
• /
• 2004

Because of the excellent thermal and chemical properties of mullite and cordierite as the stable oxide ceramic materials, they were widely used from engineering materials to electronic materials. Notwithstanding of their high demands, mullite was synthesised because it is not existed in nature. It is also difficult to produce cordierite of fine powder with high purity due to the narrow range of synthetic temperature. Mullite was synthesised by solid state reaction. However, synthesized mullite has been inhomogeneous. Because of the facts, various synthetic methods have been studied so far including sol-gel method. The purpose of this study is to synthesis mullite and cordierite of fine powder with high purity at the lower temperature by solution-polymerization route using PVA as a polymer carrier, which is an economical method by using low cost materials. As a result, mullite and cordierite were produced with mono crystal phase at 1200$^{\circ}C$ and 1250$^{\circ}C$, respectively, and their surface area over 20 ㎡/g.