• Korean Journal of Microbiology
• /
• v.28 no.3
• /
• pp.278-282
• /
• 1990

Diffusion and partition of progesterone into the polyacrylamide gel was examined. Diffusion coefficient of progesterone decreased down to an asymptotic value as the concentration of the organic solvents in the diffusing medium increased. However the partition coefficient diminished steadily. Crosslinking density in the gel didn't affected the diffusion coefficient considerably but lowered the partition coefficient due to the contraction of pore volume of the gel. Progesterone showed higher diffusion coefficient as well as partition coefficient in the polyurethane than in the polyacrylamide gel, which seems to be ascribed to the difference in hydrophobicity, pore volume and pore size of the polymer matrix.

• Journal of the Korean Society of Visualization
• /
• v.11 no.1
• /
• pp.16-21
• /
• 2013

In this study, diffusion coefficients of 20 kDa FITC-dextran in 2% agarose gel with different cell concentrations were measured using fiberoptic-based fluorescence recovery after photobleaching technique. As increasing cell concentration suspended in agarose gel, the diffusion coefficients were decreased. The diffusion coefficient of agarose gel which contains $10{\times}10^6$ cells/ml was decreased to 11% that of in agarose gel without cells. The distribution of fluorescence dye in 3D scaffold was also simulated. The simulation result shows that the diffusion coefficient is more significant factor than the scaffold structure.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.156-160
• /
• 1998

Probe diffusion with latex particles in two different types of chemically cross linked gel has been studied. The diffusion of particles in silica gel is decreased by decreasing the gel correlation length but the particles' diffusion in the acrylamide gel still shows the heterogeneity of the gel. By increasing the contents of the gel network the silica gel makes a more homogeneous and compact structure than that of acrylamide gel which has partial heterodyning. Dynamic light scattering study with the probe particles in two different gels reveals the heterogeneity of the gel network. The latex particles trapping in the gel has been investigated by using non-ergodic concepts.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.217-223
• /
• 1991

A capillary method was used to evaluate the properties of mass transfer process and diffusion coefficients in the gel food. Amaranth dye was selected as a diffusant material to visualize the degree of diffusion procedure easily. After contacting cylinder containing agar gel with amaramth dye solution for some hours, the gel was cut to five segments by 0.5 cm in length. The diffusant concentration from the segments were measured by the spectrophotometer at 523 nm. Prediction models for the diffused quantities in gel food were established by the regression program of SPSS package program. Generally, diffusion coefficient can be calculated by Fick's second law, however, it will be determined by using numerical analysis method more easily. Finally the diffusion coefficients in this research were calculated by arithmetic mean of the measured values. As raising gel agent concentration, the mean diffusion coefficient tended to decrease because the obstruction effect came to become significant.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.36-41
• /
• 2017

The release profiles of nisin from nisin-incorporating gel foods and the antimicrobial activities of the gels on the growth of Brochothrix thermosphacta in an aqueous system containing the gels have been investigated. A linear regression model was applied to determine the diffusion coefficient (D) for the diffusion of nisin in the gel. The antimicrobial activities of nisin released from 1, 2 and 3% (w/v) agar gels on the growth of B. thermosphacta in a broth medium with and without nisin were investigated. The D decreased from $1.2{\times}10^{-2}$ to $8.2{\times}10^{-3}$ and $6.4{\times}10^{-3}cm^2/s$ as the agar concentration in the gel increased from 1 to 2 and 3% (w/v), demonstrating the diffusion rate in the gels can be controlled by the agar concentration in gel. The agar gel incorporating nisin inhibited the B. thermosphacta growth in the broth medium by prolonging the lag phase. The growth inhibition was enhanced by the addition of nisin in the medium. The results of this study exhibited that the gel food is a feasible nisin delivery system with a controlled release achieved by the adjustment of agar concentration in the system, demonstrating the potential of nisin-incorporating gel for preserving particulate-containing drinks.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.2
• /
• pp.32-36
• /
• 2001

A new solid source for low temperature diffusion into silicon was developed. The source wafer consists of an “active” compound, which is sol-gel prepared phosphosilicate glass-ceramics containing 56% P$_2$O$\sub$5/, embedded in a skeletal foam-like, inert substrate. Phosphorus diffusion from the new solid sources at low temperatures (800-875$^{\circ}C$) produced reprodecible sheet resistances and shallow junctions. From a series of one hour doping runs, the life time of the phosphosilicate source was determined to be over 40 hours. The effective diffusion coefficient of phosphorus into silicon and the corresponding activation energy at 850$^{\circ}C$ were determined to be 7.5${\times}$10$\^$-15/ $\textrm{cm}^2$/sec and ∼3.9 eV, respectively.

• Archives of Pharmacal Research
• /
• v.17 no.4
• /
• pp.240-243
• /
• 1994

Release rates of flurbiprofen from transdermal gels made of poloxamer 407 were evaluated using a membraneless diffusion cell in order to study the effects of formulation variables on flurbiprofen release such as poloxamer 407 (17.5-25%) drug (0.1-1.0%), ethanol (10-20%), PG or PEF 300 (5-15%) concentrations and gel pH(3-7). Isopropyl myristate was employed as a receptor medium for the drug released from the gel. The diffusion coefficient of flurbiprofen decreased linearly as the amount of poloxamer 407 and the drug in the gel increased. The release rate of flurbiprofen was gel increased. The The addition of more ethanol in the gel increased the drug release, resulting from the increase of the thermodynamic activity of the drug in the aqueous phase of the gel. However, the concentration effects of PG and PEG 300 on the release rate of flurbiprofen were negligible over the concentration range used.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.347-353
• /
• 2022

Agarose hydrogel, a solid electrolyte, was investigated voltammetrically in terms of transport properties and natural convection effects using a ferrocenyl compound as a redox probe. To confirm the diffusion properties of solute on the agarose interface, the diffusion coefficients (D) of ferrocenemethanol in agarose hydrogel were determined by cyclic voltammetry (CV) according to the concentration of agarose hydrogel. While the value of D on the agarose interface is smaller than that in the bulk solution, the square root of the scan rate-dependent peak current reveals that the mass transport behavior of the solute on the agarose surface shows negligible convection or migration effects. In order to confirm the reduced natural convection on the gel interface, scan rate-dependent CV was performed in the solution phase and on the agarose surface, respectively. Slow scan voltammetry at the gel interface can determine a conventional and reproducible diffusion-controlled current down to a scan rate of 0.3 mV/s without any complicated equipment.

• Journal of the Korean Ceramic Society
• /
• v.29 no.2
• /
• pp.89-94
• /
• 1992

The kinetics of volatilization of phosphorous oxide from phosphosilicate glassceramic powders prepared by a sol-gel process were investigated at a given temperature. The rate of P2O5 vaporization increased with the P2O5 concentration in the phosphosilicate powder. Vaporization from the powder containing 46% P2O5 was analyzed using a kinetic model for diffusion limited evaporation. The diffusion through phosphosilicate glass in the surface of each particle in the temperature range 800~85$0^{\circ}C$ are presented.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.307-314
• /
• 1998

PZT thin films were fabricated by the Sol-gel method. Starting materials used for the preparation of the stock solution were Pb-acetate trihydrate, Zr-normal propoxide and Ti-isopropoxide. 2-Methoxyethanol and iso-propanol were used for solution. For studying the diffusion of Pb ion into the substrates. We used bare Si substrate, $SiO_2/Si$ substrates which was produced by thermal oxidation and $TiO_2/SiO_2/Si$ which was mad by Sol-gel method. Densification and adhesion of thin films were observed by SEM. Phase formation of thin films and diffusion of Pb ion into the substrate were examined by XRD and ESCA, respectively. In the case of bare Si and $SiO_2/Si$ substrate, we obtained the perovskite phase at $700^{\circ}C$ and restricted a little the diffusion of Si ion into the film with $SiO_2$ buffer layer. In the case of $TiO_2/SiO_2/Si$, perovskite phase were obtained at $500^{\circ}C$ and the diffusion of Pb ion and Si ion were restriced.