• 제목/요약/키워드: gauge function

검색결과 141건 처리시간 0.023초

Analysis of Wave Transmission Characteristics on the TTP Submerged Breakwater Using a Parabolic-Type Linear Wave Deformation Model

  • Jeong, Jin-Hwan;Kim, Jin-Hoon;Lee, Jung-Lyul
    • 한국해양공학회지
    • /
    • 제35권1호
    • /
    • pp.82-90
    • /
    • 2021
  • Owing to the advantages of assuring the best views and seawater exchange, submerged breakwaters have been widely installed along the eastern coast of Korea in recent years. It significantly contributes to promoting the advancement of shorelines by partially inhibiting incident wave energy. Observations were carried out by a pressure-type wave gauge in the Bongpo Beach to evaluate the coefficients of wave transmission via a submerged breakwater, and the results obtained were compared with those of existing conventional equations on the transmission coefficient derived from hydraulic experiments. After reviewing the existing equations, we proposed a transmission coefficient equation in terms of an error function. Although it exhibited robust relationships with the crest height and breaking coefficient, deviations from the observed data were evident and considered to be triggered by the difference in the incident wave climate. Therefore, in this study, we conducted a numerical experiment to verify the influence of wave period on the coefficients of wave transmission, in which we adopted a parabolic-type mild-slope equation model. Consequently, the deviation from calculated results appears to practically cover all deviation range in the observed data. The wave period and direction of the incident wave increased, the transmission coefficient decreased, and the wave direction was determined to demonstrate a relatively significant influence on the transmission coefficient. It was inferred that this numerical study is expected to be used practically in evaluating the design achievement of the submerged breakwater, which is adopted as a countermeasure to coastal beach erosion.

낚시에 물린 잉어가 미치는 힘과 꼬리 진동에 의한 주기성 (The Jerking Force by Hooked Carp and its Periodicity with the Tail Beat)

  • 고관서;김용해
    • 한국수산과학회지
    • /
    • 제15권3호
    • /
    • pp.226-232
    • /
    • 1982
  • 낚시 어구 재료의 규격을 정하는데는 우선 낚시에 물련 고기가 순간적으로 잡아채는 충기하중, 피로하중 등을 기본적으로 고려하여야 할 것이다. 본 실험은 부산수산대학 양어장에서 잉어가 낚시에 물렸을 때 미치는 힘을 strain gauge를 사용하여 측정하고 아울러 꼬리 진동 측정장치를 만들어 꼬리의 진동과 힘의 변화를 동시에 기록하여 분석해 보았다. 잉어가 낚시에 물렸을 때 미치는 최대의 힘 $F_m$은 고기의 체중 W에 따라$$F_m=3.23W+105$$로 나타났다. 시간 $t_n$에 대한 최대의 힘의 변화 $F_n$$$F_n=a_n(|t_n|+C)^{-b}_n$$ (단, $$C=(\frac{a_n}{F_m})^\frac{1}{b_n} -10T/2{\leq}t_n{\leq}10T/2$$)에서 $a_n=0.27W-6.52$이고 $b_n$은 평균 2.10이며 주기는 체중에 따라 T=0.000385W+0.193으로 주어진다. 잉어가 낚인 직후부터의 시간 t에 따라 꼬리 진동에 의한 각 Peak점의 힘의 크기 $F_p$$$F_p=(2.23W+105)e^{-{\beta}t}+W$$로 표시되는데, 낚시에 물린 초기단계에서는 지적지수 $\beta$가 거의 0에 가까우나 마지막 단계에서는 체중에 관계없이 평균 1.7정도 되었다. 또한, 잉어가 미치는 힘의 가 peak 점간의 주기는 재리 진동의 주기와 서로 밀접한 상관 관계가 있었다.

  • PDF

피부사상균 감염개에서 Ketoconazole 경구투여시의 간독성에 관한 연구 (Hepatotoxicity in treatment of canine dermatophytosis with ketoconazole)

  • 배성수;김철호;김태융;강정부
    • 대한수의학회지
    • /
    • 제45권2호
    • /
    • pp.255-261
    • /
    • 2005
  • The purpose of this study is to compare hepatotoxicity of each treatment for dermatophytosis; one is the administration of the ketoconazole only and the other, ketoconazole with diphenyl-dimeththyl-dicarboxylate. Have chosen the range of 14-24 months of healthy dogs divided by two groups (group 1 and group 2) for the experiment of which test proved positive in dermatophytosis diagnosis and showed normal reaction in terms of physical examination, blood chemistry and especially of liver function. Group 1 was administrated ketoconazole orally at 10 mg/kg/day and of same dose of ketoconazole with diphenyl-dimethyl-dicarboxylate for group 2. After administering, we have tested two groups by blood collecting every one week in order to check the differences of hepatotoxicity state through AST, ALT and r-GTP, the barometers of liver function which lasted for 12 weeks. Moreover, tested Indocyanine Green (ICG), known as susceptible gauge of function of excretion before starting the experiment and tested ICG as well after 12 weeks. The experiment of result the value of group 1 in AST, ALT and r-GTP has been highly rised after administering ketoconazole for 10 weeks meanwhile, of group 2 has shown a steady state troughout the whole experiment. For ICG test, we injected 0.5 mg/kg of ICG into a vein for both groups and tested the retention rate at regular interval of 15, 30, 45 minutes. The results of retention rate in two groups were similar to before the drug administration. However, after 12 weeks the retention rate of group 1 has been delayed, on the other hand, retention rate of group 2 were a steady state. In conclusion, the administration of ketoconazole only for a long period of time induced hepatotoxicity where as, the administration of ketoconazole with diphenyl-dimethyl-dicarboxylate didn't induce hepatotoxicity. Therefore, when doctors prescribes for a dog with dermatophytosis should not administrate ketoconnazole itself but with diphenyl-dimethyl-dicarboxylate and one who has abnormal condition of liver function should not be prescribed ketoconazole treatment. If there is a case needed to prescribe ketoconazole treatment, the regular monitoring should be accompanied by at the same time.

좌굴방지장치 영향을 고려한 복합재 적층판의 압축강도에 대한 이차원 크기 효과 (Two Dimensional Size Effect on the Compressive Strength of Composite Plates Considering Influence of an Anti-buckling Device)

  • 공창덕;이정환
    • Composites Research
    • /
    • 제15권4호
    • /
    • pp.23-31
    • /
    • 2002
  • 시편 게이지 면적($길이{\;}{\times}{\;}폭$)의 이차원 크기효과가 T300/924 $[45/-45/0/90]_3s$ 탄소섬유/에폭시 적층판의 압축거동에 대해 조사하였다. 개조된 압축시험치구(ICSTM)와 좌굴방지장치가 $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm,{\;}90mm{\;}{\times}{\;}90mm$의 게이지 길이와 폭을 가진 시편들의 압축시험에 사용하였다. 모든 경우의 파괴들은 시편 게이지 길이 내에서 주로 갑자기 발생하였다. 파괴 후 분석결과는 $0^{\circ}$층의 섬유의 미소좌굴에 의해 파괴를 시작하여 최종파괴를 일으키는 임계파괴기구일 것으로 생각되었다. 이것은 매트릭스 지배적인 파괴를 의미하며, 초기섬유굴곡에 따라 파괴가 지배적으로 시작된다는 것을 말한다 이것은 또한 제작공정과 품질이 압축강도를 결정하는 중요한 역할을 한다고 볼 수 있다. 좌굴방지장치를 장착하고 시험할 때 장치의 볼트 조임 토크에 따라 시편과의 접촉마찰 등에 의해 실제 압축강도 보다 크게 나타나는 결과를 보였다. 좌굴방지장치의 영향을 유한요소법을 이용하여 해석한 결과 실제 압축강도 보다 7% 정도 크게 나타남을 확인하였다. 부가적으로 홀을 갖는 시편들의 압축시험도 수행되었다. 홀에 의한 국부응력집중이 적층판 강도에 지배적 요인이었다. 파괴강도는 홀 크기와 시편 폭이 증가할수록 감소하였으나 탄성응력집중계수로 예측된 값보다는 일반적으로 크게 나타났다. 이것은 사용된 복합재가 이상적인 취성재질이 아니라는 것을 의미하며 홀 주위에서 다소간의 응력이완이 발생한다고 볼 수 있다. X선 검사 사진분석에서 섬유좌굴과 층간분리형태의 손상이 파괴하중의 약 80%에서 홀 가장자리로부터 시작되었고 임계파괴크랙길이인 2-3mm의 불안정한 상태에 도달하기 전까지는 하중 증가와 더불어 안정되게 파괴가 진전되었다(시편의 기하학적 크기에 의존함). 이 손상과 파괴는 선형 cohesive zone 모델로 해석되었다. 노치없는 시편의 압축강도와 평면 파괴인성의 측정된 적층판 변수들을 사용하여 홀의 크기와 시편 폭의 함수로서 홀을 갖는 적층판의 압축강도를 성공적으로 예측하였다.

저류함수기법을 이용한 격자기반의 강우-유출 모형 개발 (Grid Based Rainfall-Runoff Modeling Using Storage Function Method)

  • 신철균;조효섭;정관수;김재한
    • 한국수자원학회논문집
    • /
    • 제37권11호
    • /
    • pp.969-978
    • /
    • 2004
  • 수문학적 모델에 대한 연구보고에 의하면 유출량 모의 측면에서 집중형 모형은 분포형 모형보다 적용성이 좋다고 볼 수 있다. 분포형모형은 컴퓨터 계산환경 및 현장 실험이 허용하는 범위내에서 지형인자를 단순화하여야만 하기 때문에 양적인 오차를 가진다. 하지만 공간적 지형인자를 고려한다는 측면에서 분포형모형은 지표수 흐름을 분석하는데 더욱 효과적이다. 본 연구의 목적은 흐름의 특성을 결정짓는 최소한의 지형인자(흐름경사, 방향, 누적도)를 고려한 저류함수를 이용하여, 격자기반의 공간적 강우-유출모형을 개발하는 것이며, 이러한 작업의 과정은 개인용 컴퓨터에서 이루어진다 모형의 원형은 비교적 작은 유역인 횡성다목적댐을 대상으로 개발하여, 유역면적이 비교적 넓은 합천댐 유역을 대상으로 적용하였다. 댐지짐에 대한 유역유출 모의결과 Nash J.E. 와 Sutcliffe J.V.가 제안한 효율계수는 약 0.9를 상회하였으나, 유역내 상류 수위관측소에 대한 효율계수는 양호하지 못하였는데, 이러한 이유는 대상댐 유역에 대하여 산정된 수위-유량 곡선식의 고수위부분이 과추정 되었다고 판단된다. 본 연구결과 유역의 공간적으로 분포된 유역특성을 고려한 강우-유출모형은 GIS를 이용하여 손쉽게 구현할 수 있었다. 향후 강우레이더와 같이 공간적으로 분포된 강우량의 실시간 취득이 범용화되면, 본 연구의 분포형 모형을 직접 적용할 수 있을 것으로 판단된다.

글씨쓰기 훈련과 근력 훈련이 비우세손 기능과 근력에 미치는 영향 (Effects of the Handwriting Training and the Muscle Strength Training on the Function and Muscle Strength of Non-Dominant Hand)

  • 김명진;유영민;이향진;이혜진;장철
    • 대한통합의학회지
    • /
    • 제1권2호
    • /
    • pp.23-35
    • /
    • 2013
  • Purpose : We intend to make the study date for an effect of therapy by comparing the functional level both before and after conducting handwriting training and strength training as a part of treatment to improve muscle strength and function of the patient's non-dominant hand. Method : 8 subjects in writing training group conducted hand writing training 30 minutes at once and three times a week for 4 weeks in total 12 times, and 8 subjects in muscle training group conducted muscle training program of putty and Rolyan ergonomic hand exerciser for 15 minutes respectively in sum up 30 minutes at once and three times a week for 4 weeks in total 12 times. 8 subjects in control group are not applied any training for 4 weeks. Results : It was much more effective in handwriting training than muscle strength training by Grooved pegboard because this study showed the speed decrease from 67.11 to 58.26 seconds in handwriting compared with muscle strength training which showed 5.22 seconds decrease from 67.54 to 62.32(P<.05). It showed about 1.34 muscle strength improvement from 6.60 to 7.94 in handwriting training and 0.92 improvement of muscle strength from 7.04 to 7.96 in muscle strength training by 3-jaw chuck pinch, so handwriting training was more effective(P<.05). It showed 11.58 seconds decrease in handwriting training from 26.62 to 18.01 seconds and 10.93 seconds decrease from 27.43 to 16.50 seconds in muscle strength training, so it was significantly shortened both in handwriting and muscle strength training(P<.05). Conclusion : Dexterity, muscle strength, and handwriting ability of non-dominant hand could improve both the handwriting training and the muscle strength training.

Computer Knitting Simulation을 활용한 장식사 니트소재의 시각적 감성평가 -SDS-ONE의 Paint 기능 활용- (Visual Sensibility Evaluation of Fancy Yarns for Hand Knitting of using Computer Knitting Simulation -Application of SDS-ONE Paint Function-)

  • 김미진;이윤미;김영주;박명자
    • 한국의류학회지
    • /
    • 제32권9호
    • /
    • pp.1333-1342
    • /
    • 2008
  • This study intended to evaluate the visual sensibility of textiles of knitting simulation through the painting function of SDS-ONE, a computer knitting system, with the use of various fancy yarns for hand knitting. For this study, six kinds of fancy yarns with difference manufacturing style and form were selected: loop yarn, tamtam yarn, fur1 yarn, fur2 yarn, ladder yarn, and tape yarn. In order to create a computer knitting simulation, paint function of SDS-ONE was employed to scan the fancy yarns for hand knitting with a scanner. Then, after the registration of the yarns as data, the yarn was brought in for knitting simulation in plain stitch with 3 gauge. After that a survey was conducted involving 60 female experts in their twenties. Using SPSS 12.0, factor analysis, reliability, Pearson correlation coefficient, ANOVA, Duncan test, and regression analysis were performed to analyze the collected data. First, according to the result of analyzing the visual sense factor, three factors of the 'inflexibleness/ruggedness sense', 'lightweight sense', and 'smoothness sense' was extracted. According to the result of analyzing the visual sensibility factor, three factors of the 'activity', 'grace', and 'purity' was extracted. Second, With regard to preference and purchase intention, the knitted fabric with tamtam yarn(H2) was preferred than the other samples, indicating that the respondents had intention to purchase it. As for word-of-mouth intention, H2 ranked the first place, implying the respondents had intention to recommend it to other people. Third, the examination of the use of products each knitting simulation knit found that sweater and muffler are the most appropriate knit products. And H2 was the most suitable sample for sweater and muffler products. This study tried to prove that knit textile can be visually evaluated through a computer knitting simulation without the actual knitting and then to provide accurate data to related companies or the academic circle.

Optimization of aircraft fuel consumption and reduction of pollutant emissions: Environmental impact assessment

  • Khardi, Salah
    • Advances in aircraft and spacecraft science
    • /
    • 제1권3호
    • /
    • pp.311-330
    • /
    • 2014
  • Environmental impact of aircraft emissions can be addressed in two ways. Air quality impact occurs during landings and takeoffs while in-flight impact during climbs and cruises influences climate change, ozone and UV-radiation. The aim of this paper is to investigate airports related local emissions and fuel consumption (FC). It gives flight path optimization model linked to a dispersion model as well as numerical methods. Operational factors are considered and the cost function integrates objectives taking into account FC and induced pollutant concentrations. We have compared pollutants emitted and their reduction during LTO cycles, optimized flight path and with analysis by Dopelheuer. Pollutants appearing from incomplete and complete combustion processes have been discussed. Because of calculation difficulties, no assessment has been made for the soot, $H_2O$ and $PM_{2.5}$. In addition, because of the low reliability of models quantifying pollutant emissions of the APU, an empirical evaluation has been done. This is based on Benson's fuel flow method. A new model, giving FC and predicting the in-flight emissions, has been developed. It fits with the Boeing FC model. We confirm that FC can be reduced by 3% for takeoffs and 27% for landings. This contributes to analyze the intelligent fuel gauge computing the in-flight fuel flow. Further research is needed to define the role of $NO_x$ which is emitted during the combustion process derived from the ambient air, not the fuel. Models are needed for analyzing the effects of fleet composition and engine combinations on emission factors and fuel flow assessment.

웹 GIS 기반 실시간 농촌홍수관리시스템 개발 (Development of a Web GIS-Based Real-Time Agricultural Flood Management System)

  • 정혁;정인균;박종윤;김성준
    • 한국지리정보학회지
    • /
    • 제15권4호
    • /
    • pp.15-25
    • /
    • 2012
  • 이 연구는 자동수위계가 설치된 378개소 농업용저수지에 대하여 웹기반 실시간 농촌홍수관리시스템을 구축하기 위하여 이루어졌다. 농촌홍수관리시스템은 한국농어촌공사의 농촌용수종합정보시스템(Rural Agricultural Water Resource Information System, RAWRIS)과 연계 운영되는 시스템으로서 RAWRIS의 통합 데이터베이스에 구축 관리되는 일강우자료, 시강우자료, 자동수위측정자료를 실시간으로 수신하여 연계 활용하는 시스템이다. 이들 자료를 이용하여 강우사상이 발생되는 시점을 기준으로 해당 강우사상기간동안의 매시간 홍수분석을 수행함으로서 해당 저수지로의 홍수유입량의 변화양상을 파악할 수 있는 계산결과를 제공함과 동시에 수위증가와 계산방류량으로 인한 저수지 상 하류의 홍수위험도를 등급화 하여 화면에 표출함으로서 광역적인 홍수현황을 파악할 수 있도록 구성하였다. 더불어 기상청 기상특보와 예보자료로부터 해당저수지유역에 발생가능하다고 생각되는 강우량을 저수지 관리자가 직접 입력하여 분석할 수 있는 기능을 통해 댐 운영에 참고 될 수 있는 정보를 제공할 수 있게 하였다.

스플릿 캐스트법을 이용한 중심위의 채득방법에 따른 재현성에 관한 연구 (A Study on The Reproducibility of Centric Relation Taken with Three Methods Using Split Cast Technique)

  • 계기성;김영석;안종관
    • 구강회복응용과학지
    • /
    • 제17권4호
    • /
    • pp.275-282
    • /
    • 2001
  • Centric relation is defined the horizontal position between maxilla and mandible when condylar head of mandible is positioned adequately in mandibular fossa. The most recent concept of centric relation position is defined as the mandibular position in which the condyles are in their most superoanterior position in the articular fossa, resting against the posterior slope of the articular eminences, with the articular disk properly interposed. To be suitable as a reference point during occlusal management, a mandibular position of centric relation has to be functionally acceptable to the patient and clinically reproducible and achievable during everyday practice. There are numerous methods for determination of centric relation, and in this study we used three of them, Gothic arch tracing(Group I), leaf gauge(Group II), and anterior jig(Group III). The subjects were 10, 8 men and 2 women, age-ranged from 23 to 26 years old, had no prosthetics in thier mouth, and had no sign and symptom of temporomandibular disorders. We gained three occlusal records using each method, and then the degree of the reproducibility was examined with split cast technique. In this study the reproducibility of centric relation using split cast technique was greater in the order of Group I(mean 1.6), Group II(mean 1.4), and Group III(mean 1.3), but there was no significant differences among them statistically(p>0.05).

  • PDF