• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.128-136
• /
• 2013

This study presents the development of Gateway Control Module using SAE J1939 protocol for the commercial vehicles. Presently, the load rate of CAN bus is increased by the single network composition and addition of new ECUs for development of intelligent vehicles. Because the embedded system of the integrated network control function has the errors of the CAN bus caused by the increase of ECU, it is needed for development of commercial vehicles. Also, this study presents the development of smart functions that can diagnosis CAN bus errors, fault diagnosis of ECU and basic function that arbitrates CAN bus between ECUs of commercial vehicle. GCM was designed for 4channel separation about Gateway function as solution of load rate decrease and smart functions. HILS(Hardware in the loop simulation)system that can achieve simulation about CAN Messages of all systems on vehicle was applied to evaluate performance and verification of all functions and performance. The load rate on CAN bus was decreased at using functions what was delivery, block and process of GCM. Through this, it was enabled to organize systematic architecture for gateway.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.114-119
• /
• 2008

In this paper, a home network gateway has been developed, which supports the ZigBee and power line communication methods at the same time. A conversion protocol for smooth information exchange between ZigBee module and power line communication module have been implemented on the gateway, and the performance and reliability of the gateway have been evaluated as good through field tests. The gateway can support various home networks.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.1
• /
• pp.29-34
• /
• 2010

In this study, we realized the broadband home gateway system of dual mode based upon EDR 2~3Mbps transmission speed and 300Mbps of 802.11n, In broadcasting and telecommunication convergence networks to deliver multimedia services, high-quality home. The bluetooth module is designed to use general low rate data speed service and the 802.11n module also is designed to use high rate speed service at various home network situation. The dual mode home gateway system, bluetooth and 802.l1n module, is well realized for many specification such as emission power, spurious power, impedance matching, frequency channel test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.11
• /
• pp.895-901
• /
• 2013

In this paper we propose design of a multi-protocol gateway middleware based on USN. The proposed multi-protocol gateway middleware defined the transmit messages format, and were used the USN module interface protocol for connect to external application MCU using the UART. In this case, the gateway was checks the communication state of Zigbee module with settings information, and setting Zigbee serial PDU format. The experimental results of the proposed multi-protocol gateway middleware were proved the efficiency of integrate protocol gateway to use the multi-protocol gateway than gateway to using the repeater through the power control and communications a controlled experiment.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.370-373
• /
• 2003

The legacy Residential Gateway (RG) which constitutes fixed WAN interfaces and LAN interfaces, is at a disadvantage due to difficult modification of a system. In this paper, we propose the flexible module-based RG on the basis of the RG standardization and demonstrate the prototype system, whose function is verified by the home automation application.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.4
• /
• pp.1-10
• /
• 2010

With the rapid advance of information technology and the popularity of digital medical, medical information are growing, the process of hospital digitalization are gradually quicken and systems involved are more and more. HIS system mainly deals with patient information, it follows the standard of HL7. While PACS system mainly manages image information, it follows the standard of DICOM. Because HIS and PACS deal with different information and follow different standards, it is difficult to directly communicate. This paper presents a method of establishing HL7/DICOM gateway to realize the information exchange of HIS and PACS. The HL7/DICOM gateway designed in this paper is made up of three modules. First, HL7 messages and triggered events are designed to achieve the function of transaction processing module. According to the designed HL7 messages, four message interface functions are defined to accomplish the function of send/receive messages module. Finally, the algorithm of construct/parse messages is given to complete the function of construct/parse messages module. Result shows that HIS and PACS realize information exchange successfully by using the HL7/DICOM gateway Implemented in this paper.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.418-420
• /
• 2002

휴대용 컴퓨팅이 발전해 나가면서 무선 네트워킹이 등장하게 되었다. 유선 네트워크의 케이블로부터 자유로워지면서 사용자들은 장소의 제약을 덜 받으며 네트워크와 인터넷의 다양한 서비스를 받는 것이 가능해졌다. 무선 네트웍킹 환경이 나날이 발전함에 따라 무선 네트워킹에 관련된 여러 가지 기술이 발표되어왔다. 이들 중 가장 대표적인 것이 바로 무선 랜과 Bluetooth이다. 본 논문에서는 Bluetooth륵 이용한 무선망에 있는 PC와 유선망에 위치한 PC와의 통신을 가능케 하는 어플리케이션의 구현을 통하여 무선망과 유선망간의 데이터 교환 방법을 보였다. 구현된 프로그램은 총 3개로 구성되어 있다. 유선망에 연결되어있지 않은 PC에는 Bluetooth module이 부착되어있고, Bluetooth gateway는 유선망에 연결되어 있으며 Bluetooth module이 부착되어있다. Bluetooth gateway와 유선망의 PC와는 ethernet을 통하여 데이터를 주고받도록 구현하였다. 본 연구에서는 유선망과 무선망을 중계할 게이트웨이를 애플리케이션 레벨에서 분리(split) 방식을 이용하여 구현하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.488-489
• /
• 2009

In this paper, a FlexRay module and gateway is developed for high speed in-vehicle network. Speed of FlexRay is 10 times higher than that of CAN. In this paper, FlexRay module is implemented using MC9S12XF512 micro-controller and gateway converting CAN message to FlexRay message.

• Journal of KIISE:Information Networking
• /
• v.29 no.6
• /
• pp.635-644
• /
• 2002

We propose the PBSM(Protocol-Based Security Module) system which guarantees the secure data transmission under web environments. There are two modules in the PBSM architecture. One is Web Server Security Module(WSSM) which is working on a web server, the other is the Winsock Client Security Module(WSCSM) which is working on a client. The WSCSM security module decrypts the encrypted HTML document that is received from the security web server. The decrypted HTML document is displayed on the screen of a client. The WSSM module contains the encryption function for HTML file and the decryption function for CGI(Common Gateway Interface). The formal analysis methodology is imported from format theory for analyzing the data flow of the PBSM system. The formal analysis methodology is based on the order theory.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.24-33
• /
• 2011

This paper describes a gateway system based on a MOST network for integrating several different automotive network protocols. For transparent data communication among different protocols regardless of the high-level messages and the data format, Pseudo MOST frame was designed based on MOST frame and this pseudo MOST data frame is used as the data carrier. For automotive application, two types of gateways were developed, one board-type gateway and small-sized module-type gateways. One board-type gateway has ethernet port, video port and audio port. Meanwhile, small-sized module-type gateways are developed for video, audio, bluetooth and Flexray, respectively. Experiments with a network system using several small-sized module gateways verified efficient data communication among different network protocols and confirmed the effectiveness of the proposed gateway system for automotive network integration.