• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.2
• /
• pp.178-186
• /
• 2018

A chirp-echo data acquisition and processing system was developed for use as a simplified, PC-based chirp echo-sounder with some data processing software modules. The design of the software and hardware system was implemented via a field-programmable gate array (FPGA). Digital signal processing algorithms for driving a single-channel chirp transmitter and dual-channel receivers with independent TVG (time varied gain) amplifier modules were incorporated into the FPGA for better real-time performance. The chirp-echo data acquisition and processing system consisted of a notebook PC, an FPGA board, and chirp sonar transmitter and receiver modules, which were constructed using three chirp transducers operating over a frequency range of 35-210 kHz. The functionality of this PC-based chirp echo-sounder was tested in various field experiments. The results of these experiments showed that the developed PC-based chirp echo-sounder could be used in the acquisition, processing and analysis of broadband acoustic echoes related to fish species identification.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.317-327
• /
• 2020

R&D(Research and Development) efficiency analysis is a very important issue in academia and industry. Although many studies have been conducted to analyze R&D(Research and Development) efficiency since the past, studies that analyzed R&D(Research and Development) efficiency considering both patentability and patent quality efficiency according to the financial performance of a company do not seem to have been actively conducted. In this study, measuring the patent application and patent quality efficiency according to financial performance, patent quality efficiency according to patent application were applied to corporate groups related to artificial intelligence hardware technology defined as GPU(Graphics Processing Unit), FPGA(Field Programmable Gate Array), ASIC(Application Specific Integrated Circuit) and Neuromorphic. We analyze the efficiency empirically and use Data Envelopment Analysis as a measure of efficiency. This study examines which companies group has high R&D(Research and Development) efficiency about artificial intelligence hardware technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1777-1781
• /
• 2011

Tosin backplane system design of this study (Backplane) from the HSTL (High-Speed Transceiver Logic) characteristics of the transmit and receive data using the HSPICE simulations and the actual implementation on the FPGA Data transmission characteristics were described by comparing the simulation results. Simulation and measurement criteria for point to point data transmission characteristics of wire length possible to send and receive data about the speed limits were reviewed. Measured point to point connection to send and receive signals at terminal velocity, the factors that affect the electrical noise around the wire length and showed a very important role.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.12
• /
• pp.1065-1072
• /
• 2014

We developed a GPS digital signal processing FPGA IP, SIGP-1001 to replace the obsolete GP2021 device, which has been used for many space-borne GPS receivers. From a series of tests, we verified that SIGP-1001 has equivalent performance to the GP2021 device under the same operating condition and concluded that SIGP-1001 can replace the GP2021 device. The reliability of a GPS receiver can be improved by using a space-grade FPGA with SIGP-1001 instead of the GP2021 device and its performance is expected to be improved by increasing the number of search channels.

• Journal of information and communication convergence engineering
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2020

This paper proposes a fast-processing and low-cost hardware multiple input multiple output (MIMO) channel emulator. The channel emulator is an important component of hardware-based simulation systems. The novelty of this work is the use of sharing and pipelining functions to reduce hardware resource utilization while maintaining a high sample rate. In our proposed emulator, the samples are created sequentially and interpolated to ensure the sample rate is equal to the base band rate. The proposed 4 × 4 MIMO requires low-cost hardware resource so that it can be implemented on a single field-programmable gate array (FPGA) chip. An implementation on Xilinx Virtex-7 VX980T was found to occupy 10.47% of the available configurable slice registers and 12.58% of the FPGA's slice lookup tables. The maximum frequency of the proposed emulator is 758.064 MHz, so up to 560 different paths can be processed simultaneously to generate 560 × 758 million × 2 × 32 bit complex-valued fading samples per second.

• Journal of Power Electronics
• /
• v.8 no.4
• /
• pp.363-370
• /
• 2008

In this paper, three kinds of PWM strategies for a three-phase current-fed dc/dc converter are proposed and compared in terms of losses and voltage transfer ratio. Each PWM strategy is described graphically and their switching losses are analyzed. With the proposed PWM C strategy, one turn-off switching of each bridge switch is eliminated to reduce switching losses under the same switching frequency. In addition, RMS current through the bridge switches is lowered by using parallel connection between two bridge switches and thus, conduction losses of the switches are reduced. Further, copper losses of the transformer are decreased due to the reduced RMS current of each transformer's winding. Therefore, total losses are minimized and the efficiency of the converter is improved by using the proposed PWM C strategy. Digital signal processor (DSP: TI320LF2407) and a field-programmable gate array (FPGA: EPM7128) board are used to generate PWM patterns for three-phase bridge and clamp MOSFETs. A 500W prototype converter is built and its experimental results verify the validity of the proposed PWM strategies.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.542-550
• /
• 2011

This paper describes the design and hardware implementation of a Single Input Fuzzy Logic Controller (SIFLC) to regulate the output voltage of a boost power converter. The proposed controller is derived from the signed distance method, which reduces a multi-input conventional Fuzzy Logic Controller (CFLC) to a single input FLC. This allows the rule table to be approximated to a one-dimensional piecewise linear control surface. A MATLAB simulation demonstrated that the performance of a boost converter is identical when subjected to the SIFLC or a CFLC. However, the SIFLC requires nearly an order of magnitude less time to execute its algorithm. Therefore the former can replace the latter with no significant degradation in performance. To validate the feasibility of the SIFLC, a 50W boost converter prototype is built. The SIFLC algorithm is implemented using an Altera FPGA. It was found that the SIFLC with asymmetrical membership functions exhibits an excellent response to load and input reference changes.

• Journal of Computing Science and Engineering
• /
• v.11 no.1
• /
• pp.9-23
• /
• 2017

NuDE 2.0 (Nuclear Development Environment 2.0) is a formal-method-based software development, verification and safety analysis environment for safety-critical digital I&Cs implemented with programmable logic controller (PLC) and field-programmable gate array (FPGA). It simultaneously develops PLC/FPGA software implementations from one requirement/design specification and also helps most of the development, verification, and safety analysis to be performed mechanically and in sequence. The NuDE 2.0 now consists of 25 CASE tools and also includes an in-depth solution for indirect commercial off-the-shelf (COTS) software dedication of new FPGA-based digital I&Cs. We expect that the NuDE 2.0 will be widely used as a means of diversifying software design/implementation and model-based software development methodology.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.92-102
• /
• 2003

To detect electrical faults of a TFT (Thin Film Transistor) panel for the LCD (Liquid Crystal Display), techniques of converting electric field to an image are used One of them is the PDLC (polymer-dispersed liquid crystal) modulator which changes light transmittance under electric field. The advantage of PDLC modulator in the electric field detection is that it can be used without physically contacting the TFT panel surface. Specific pattern signals are applied to the data and gate electrodes of the panel to charge the pixel electrodes and the image sensor detects the change of transmittance of PDLC positioned in proximity distance above the pixel electrodes. The image represents the status of electric field reflected on the PDLC so that the characteristic of the PDLC itself plays an important role to accurately quantify the defects of TFT panel. In this paper, the image of the PDLC modulator caused by the change of electric field of the pixel electrodes on the TFT panel is acquired and how the characteristics of PDLC reflect the change of electric field to the image is analyzed. When the holding time of PDLC is short, better contrast of electric field image can be obtained by changing the instance of applying the driving voltage to the PDLC.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.33-37
• /
• 1999

We present, for the first time, a prototype active-matrix field emission display (AMFED) with 25$\times$25 pixels in which polycrystalline silicon fie이 emitter array (poly-Si FEA) and thin-film transistor (TFT) were monolityically intergrated on an insulating substrate. The FEAs showed relatively large electron emissions above at a gate voltage of 50 V, and the TFTs were designed to have low off-stage currents even though at high drain voltages. The intergrated poly-Si TFT controlled electron emissions of the poly-Si FEA actively, resulting in improvement in the emission stability and reliability along with a low-voltage control of field emission below 25V. With the prototype AMFED we have displayed character patterns by low-boltage pertipheral circuits of 15 V in a high vacuum chamber.