• Food Science and Biotechnology
• /
• 제15권5호
• /
• pp.683-687
• /
• 2006

The respiration rate of Chinese quince was measured at 0, 5, 10, and $20^{\circ}C$ to determine its tolerable range of storage temperatures. Based on the measured respiration rates, plastic films covering a wide range of gas permeabilities were used for packaging and storing individual Chinese quince at 0 and $10^{\circ}C$. Chinese quince can be categorized as low respiration fruit. Higher respiratory quotients were observed at higher temperature suggesting that the tolerable temperature range for storage is $0-10^{\circ}C$. Packages containing Chinese quince wrapped in highly gas-permeable polyolefin film PD 941 attained, with progressive decreases in volume, 9.5-10.2% $O_2$ and 1.3-1.8% $CO_2$ at $0^{\circ}C$, 8.1% $O_2$ and 2.4% $CO_2$ at $10^{\circ}C$. At these levels, PD 941 could preserve the fruit at acceptable quality levels for 152 and 50 days at 0 and $10^{\circ}C$, respectively. Less gas-permeable packages built up high $CO_2$ concentrations (above 15.8%) and low $O_2$ concentrations (less than 1.8%) causing free volume expansion and eventual dark discoloration of the fruit. The storage life realized by packaging with polyolefin film PD 941 could facilitate the availability of Chinese quinces in winter and spring for medicinal or ornamental purposes in the fresh state.

• 한국가스학회지
• /
• 제6권4호
• /
• pp.23-32
• /
• 2002

내진설계기준은 시설물의 사회적, 경제적 중요성과 구조적 특성이 잘 반영될 수 있도록 설정되어야 한다. 즉 우선적으로 시설물별로 중요성과 특성에 따른 내진설계의 기본적인 원칙이 설정되고 이에 따라 적절한 해석 및 설계, 시공방법이 결정되어야 한다. 한국가스공사의 평택과 인천 및 통영에 있는 가스생산선비들 중 LNG 저장탱크는 원자력 발전소 기준 내진설계가 적용되어 있다. 가스 생산선비 중 저장탱크 다음으로 중요한 시설로는 중앙조정실을 들 수 있다. 중앙조정실에서는 각종 설비의 조작 및 이상유무를 판단하고 조정하는 장비들이 갖추어져 있으므로 지진에 대한 내진설계가 더욱 중요한 곳이다. 이러한 이유로 평택생산기지 중앙조정실의 내진성능을 점검하였고, 그 방법으로 건축물에 적용되고 있는 등가정적 해석법에 의한 내진성능을 평가하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.498-505
• /
• 2000

Performance of a hydraulic system is influenced by its working temperature. Therefore, it is very important to make the system perform uniformly in an entire range of the working temperature. In this study a simulation of a hydraulic control system for the powershift transmission of tractors was conducted and the effect of the temperature was investigated in terms of design conditions of the system. Results of the simulation are as follows. The hydraulic control system with a spring accumulator was found to be more convenient to control the shifting time than that with a gas accumulator. By returning the oil from the clutches to the system through a path between the filter and pump, the time delay due to the pressure difference between the low and high temperatures could be reduced. Therefore, it was recommended that the hydraulic control system for the powershift transmission of tractors must be equipped with a spring accumulator and a circuit to return oil from the clutches to the system through a path between the filter and pump.

• 자원환경지질
• /
• 제50권2호
• /
• pp.171-180
• /
• 2017

본 연구에서는 2015년 7월부터 2016년 8월까지 백두산 주롱 온천 지역에서 화산가스 및 온천수를 채취하여 분석을 실시하였다. 또한 이전 연구(Lee et al. 2014)에서 보고된 온천수의 측정값 중 $HCO_3{^-}$ 농도에 오류가 있음을 확인하고, 이를 개선하고자 했다. 온천수의 용존 $CO_2$는 이전 연구에서는 가스 크로마토그래프를 이용하여 분석하였지만, 이를 개선하여 2015년부터 TOC-IC를 이용하여 분석을 실시했다. 또한, 여러 농도의 $Na_2CO_3$ 표준 시료를 GC로 분석하여, 실제 농도와 표준시료 사이의 상관관계를 확인하였다. 그리고 이를 토대로 2014년 온천수의 용존 $CO_2$ 농도를 추정하고자 했지만, 실제 주롱(Julong) 온천 주변의 물을 채취하여 GC로 분석했을 때는 이 상관관계가 잘 적용되지 않아서 2014년 온천수의 용존 $CO_2$ 농도를 추정할 수가 없었다. 연구기간 동안 화산가스 내 $CO_2/CH_4$의 농도는 꾸준히 감소하였는데, 이에 대하여 두 가지 해석이 가능하다. 첫 번째는 화산체 내부의 환경이 조금 더 환원환경에 가까워져 상대적으로 화산가스 내 탄소가 $CO_2$ 보다는 $CH_4$ 또는 CO로 분배되기 유리해 진 것이다. 두 번째 가능성은 화산가스와 물의 상호작용이 강화되어 물에 대한 용해도가 훨씬 높은 $CO_2$의 농도가 상대적으로 감소한 것이다. 일반적으로 화산가스가 물에 희석되는 현상(scrubbing)의 영향은 화산활동이 활발한 시기보다는 잠잠한 시기에 강화된다. 한편, 온천수의 분석은 화산가스 연구에서 중요한 산성기체 성분의 음이온들과 주요 양이온, 그리고 Cd, Re, As에 대해 이루어졌다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.118-123
• /
• 2001

The linear compressor have been widely used for pressure wave generation in the Stirling cryocooler and Stirling type pulse tube cryocooler for tactical purpose. The linear compressor has small and compact structure, and long life due to having non-contact sealing mechanism. and the pressure drop through regenerator was ver important role in the motion of displacer in the expander of the Stirling cryocooler. In this study, the characteristic of the linear compressor and the pressure drop through regenerator in the expander was experimentally investigated. The results show the resonance of the compressor is very important to get maximum performance. and the gas spring force in the compression space of the compressor has effect on the characteristic of reonance. and the results show the pressure drop through regenerator is very small than operating pressure change.

• 소성∙가공
• /
• 제26권5호
• /
• pp.277-285
• /
• 2017

Vehicle weight reduction is a known strategy to improve fuel efficiency and strengthen exhaust gas regulation. The use of high strength steel can satisfy safety, efficiency, emission, manufacturability, durability, and cost requirements. However, springback of high strength steel results in undesired shape defects. Springback is one of the most important issues of high strength steel for many applications in an automobile. Servo press has various capabilities to improve defects, process conditions, and productivity problems when forming a high strength steel. Especially, servo press can be set to function with variable slide motion in a single operation. In this study, the effect of servo press slide motion on 980MPa high strength steel was investigated through U-bending test.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.220-223
• /
• 2009

Metallic bipolar plate for molten carbonate fuel cell(MCFC) is composed of the shielded slot plate and the center plate. Among these, the center plate plays an important role in gas sealing. Therefore, manufacturing of the center plate is considered one of the key issues in MCFC. The center plate is manufactured by bending process. In bending process, springback and recoiling are two main problems. By using the modified punch shape with 'step', springback and recoil are reduced. The aim of this article is to find the effect of modified punch shape. So, the bending stress along thickness direction and material direction were investigated using FEM.

• 한국축산시설환경학회지
• /
• 제17권3호
• /
• pp.171-180
• /
• 2011

각 시판되고 있는 식물을 2개의 그룹으로 나눠 첨가 후 각 시간별 배양을 실시한 후 pH, $NH_3$, VFA 발생량, 총 가스발생량, $H_2$, $CO_2$, $CH_4$ 발생량을 조사하였다. 그룹 1은 상추와 대파첨가구에서 암모니아 농도가 높았고 고추첨가구에서 낮았다 (P<0.05), 그룹 2는 마늘첨가구에서 암모니아 농도가 낮았고 (P<0.05) 깻잎, 무순과 부추첨가 구에서 높았다 (P<0.05). 마늘과 고추첨가구에서 단백질분해과정 중 아미노산에서 암모니아로 분해되는 과정에 영향을 미쳤을 것으로 사료된다. 총 VFA 농도는 대파첨가구에서 유의적으로 높았으나 (P<0.05) 그 외 시험구에서는 대조구와 차이가 없었다. Acetate와 propionate의 비율에서 볼 때 마늘첨가구가 propionate의 량이 상대적으로 증가한 것을 알 수 있었다. 모든 처리구가 대조구에 비해 가스발생량이 대체로 높았으며, 대파와 양파 첨가구가 유의적으로 높았다 (P<0.05). 마늘과 깻잎 첨가구를 제외한 모든 처리구에서 가스 발생량이 유의적으로 높았다 (P<0.05). 생강목에 속하는 강황과 생강첨가구는 pH와 총 가스발생량에서 비슷한 결과를 나타냈으며 in vitro 발효를 높였다. 마늘첨가구는 반추위내 총 가스발생량이 대조구와 유의적인 차이가 없었다 (P<0.05). 모든 시험구에서 총 가스발생량과 $CO_2$ 발생량은 대체로 유사한 경향을 보였다. 마늘첨가구는 총 가스발생량은 대조구와 차이가 없었으나 $CO_2$ 발생량은 대조구보다 유의적으로 높았다 (P<0.05). 마늘첨가구의 $CH_4$ 발생량은 배양시간과 관계없이 매우 낮은 수준을 유지했으며 48시간 배양 후 대조구의 약 1/3 수준으로 낮았다 (P<0.05). $H_2$는 거의 모든 시험구에서 미량 발생되었는데, 대조적으로 마늘첨가구에서만 매우 높은 수준으로 검출되었다. 마늘첨가구에서 g단위 DM 당 $CH_4$ 발생량이 현저히 낮았으며 다른 처리구는 대체로 대조구에 비해 높았다. 본 시험에서는 allium속의 마늘, 부추, 양파, 파를 포함한 시판 중인 채소를 이용하여 in vitro 발효조절시험을 실시하였는데 특정 식물들은 in vitro 발효 대사에 영향을 주었으며 특히 마늘 첨가는 $CH_4$ 생성에 직접적으로 영향을 준 것으로 사료된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.434-435
• /
• 2012

Plasma enhanced chemical vapor deposition (PECVD) silicon dioxide thin films have many applications in semiconductor manufacturing such as inter-level dielectric and gate dielectric metal oxide semiconductor field effect transistors (MOSFETs). Fundamental chemical reaction for the formation of SiO2 includes SiH4 and O2, but mixture of SiH4 and N2O is preferable because of lower hydrogen concentration in the deposited film [1]. It is also known that binding energy of N-N is higher than that of N-O, so the particle generation by molecular reaction can be reduced by reducing reactive nitrogen during the deposition process. However, nitrous oxide (N2O) gives rise to nitric oxide (NO) on reaction with oxygen atoms, which in turn reacts with ozone. NO became a greenhouse gas which is naturally occurred regulating of stratospheric ozone. In fact, it takes global warming effect about 300 times higher than carbon dioxide (CO2). Industries regard that N2O is inevitable for their device fabrication; however, it is worthwhile to develop a marginable nitrous oxide free process for university lab classes considering educational and environmental purpose. In this paper, we developed environmental friendly and material cost efficient SiO2 deposition process by substituting N2O with O2 targeting university hands-on laboratory course. Experiment was performed by two level statistical design of experiment (DOE) with three process parameters including RF power, susceptor temperature, and oxygen gas flow. Responses of interests to optimize the process were deposition rate, film uniformity, surface roughness, and electrical dielectric property. We observed some power like particle formation on wafer in some experiment, and we postulate that the thermal and electrical energy to dissociate gas molecule was relatively lower than other runs. However, we were able to find a marginable process region with less than 3% uniformity requirement in our process optimization goal. Surface roughness measured by atomic force microscopy (AFM) presented some evidence of the agglomeration of silane related particles, and the result was still satisfactory for the purpose of this research. This newly developed SiO2 deposition process is currently under verification with repeated experimental run on 4 inches wafer, and it will be adopted to Semiconductor Material and Process course offered in the Department of Electronic Engineering at Myongji University from spring semester in 2012.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권6호
• /
• pp.781-790
• /
• 2011

The effects of seedtime and maturity stage on nutritive value of five maize stover varieties, including conventional maize (Kexiangyu 11, CM), fodder maize (Huqing 1, FM), high oil maize (Gaoyou 115, HOM), sweet maize (Kexiangtianyu 1, SM) and waxy maize (Kexiangluoyu 1, WM), were examined based on chemical composition, in vitro gas production and in situ incubation techniques. Maize stover was sampled at d 17 and d 30 after tasseling, and designated as maturity stage 1 and stage 2, respectively. The average dry matter (DM) organic matter (OM), crude protein (CP) and fiber contents were the greatest for HOM, SM and FM, respectively. CM had the highest in vitro organic matter disappearance (IVOMD) and volatile fatty acid (VFA) concentration. The highest ammonia nitrogen ($NH_3$-N) concentration in the incubation solution, and effective degradability of DM ($ED_{DM}$) and neutral detergent fiber ($ED_{NDF}$) were observed in SM. Advanced maturity stage increased (p<0.05) DM content, $ED_{DM}$ and $ED_{NDF}$, but decreased (p<0.05) OM and CP contents, and decreased (p<0.05) b and a+b values, IVOMD and molar proportion of valerate in the incubation solution for maize stover. Maize sown in summer had greater (p<0.05) OM content, but lower DM, CP, neutral detergent fiber (NDF) and acid detergent fiber (ADF) content compared with maize sown in spring. Maize sown in summer had greater (p<0.001) IVOMD, $NH_3$-N concentration in the incubation solution and $ED_{NDF}$, but lower (p<0.01) ratio of acetate to propionate compared to maize sown in spring. The interaction effect of variety${\times}$seedtime was observed running through almost all chemical composition, in vitro gas production parameters and in situ DM and NDF degradability. The overall results suggested that SM had the highest nutrient quality, and also indicated the possibility of selecting maize variety and seedtime for the utilization of maize stover in ruminants.