• 제목/요약/키워드: gas shut-off

검색결과 38건 처리시간 0.023초

온도차 변동에 따른 전자밸브 작동모델 실험적 연구 (Experiment Study on Operation Model of Automatic Cylinder Valve by the Temperature Differences)

  • 장갑만;엄석화;김인찬;김청균
    • 한국가스학회지
    • /
    • 제16권6호
    • /
    • pp.73-79
    • /
    • 2012
  • 현재 국내의 모든 CNG자동차에는 용기용 밸브로 수동밸브가 부착되어 있으며 가스누출 사고 시 운전자가 차량을 정지하고 수동밸브를 잠궈야 하는 불편한 점이 있어 누출 사고 시에는 운전자 등이 가스누출사고를 대응하는데 어려운 부분이 있다. 유럽의 선진국에서는 가스누출 시 운전자가 시동을 끄면 자동으로 닫히는 구조를 가진 전자밸브의 장착을 의무화 하고 있어 우리나라에서도 기능성이 증가된 전자식 용기밸브를 적용하는 것이 CNG 버스의 안전성을 향상 시킬 수 있는 좋은 기회일 것이다. 본 논문에서는 개개의 전자밸브의 작동상태를 운전자가 파악하기 어려운 구조적인 문제를 보완하기 위해서 충전 중 압력의 상승에 따라서 온도가 상승하는 현상에 착안하여 문제에 접근하였다. 충전 중 온도상승이 압력차에 따라서 약 $30^{\circ}C$ 이상이 발생하는 것을 이용하여, 데이터 확인 시 온도상승이 발생하지 않는 용기는 밸브가 작동하지 않아 충전이 이루어지지 않는 것으로 판단할 수 있는 실험적 결론을 얻었다.

350 kW(300,000 kcal/h)급 우드 펠렛 보일러 운전 특성 및 성능 평가 (Performance Test and Flue Gas Characteristics of a 350 kW Wood Pellet Boiler)

  • 김종진;강새별
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.167-171
    • /
    • 2009
  • We conducted performance test of a 350 kW class wood pellet boiler installed at a dormitory whose total area is $1,354\;m^2$. The maximum heating capacity of the boiler is 350 kW(300,000 kcal/kg). The wood pellet boiler consists of 3 parts; boiler, hot water storage tank and wood pellet storage tank. In testing the boiler, we shut off hot water utility supply and open up floor heating water system in order to measure exact value of the heating output of the wood pellet boiler. To determine the efficiency and heating output of the wood pellet boiler, we measured mass flow rate of wood pellet, the lower heating value(LHV) of the wood pellet, mass flow rate and temperature of water for floor heating and so on. We measured the mass flow rate of fuel, wood pellet with respect to rotational speed of auger, wood pellet feeding screw. We also measured the flue gas concentration of the wood pellet boiler by using a gas analyser. The result shows that the efficiency of the wood pellet boiler is 80.6% based on lower heating value at 124 kW of heating output. At this condition, O2 concentration of the flue gas is 6.0%, CO and NOx concentrations are 85 and 102 ppm.

  • PDF

화학반응기의 안전성 향상을 위한 예방조치 개선에 관한 연구 (A Study on the Improvement of Preventive Measures for Improving the Safety of Chemical Reactor)

  • 변윤섭
    • 한국가스학회지
    • /
    • 제24권4호
    • /
    • pp.32-38
    • /
    • 2020
  • 화학반응기에 발생한 화재·폭발 사고사례를 기반으로 화학반응기에 설치되어 있는 예방조치의 문제점을 분석하였다. 화학반응기는 다품종의 화학제품을 생산하며, 반응폭주시 급격히 상승하는 압력을 해소하기 위해 파열판을 설치하고 파열판의 기능을 유지하기 위해 배출물질을 대기로 배출하도록 허용하고 있어 화재·폭발사고가 발생하였다. 이를 개선하기 위한 방안으로 안전건전성수준(SIL3)을 기반으로 한 안전계장시스템(SIS)을 화학반응기의 예방조치로 적용하였다. 화학반응기의 원재료를 적하하는 배관에 긴급차단밸브를 직렬로 2개 설치하여 반응폭주시 긴급차단밸브 2개 중 1개만 작동하여도 원재료 공급을 차단할 수 있도록 하고, 반응응제제 공급배관에는 자동 ON/OFF 밸브를 병렬로 설치하여 반응폭주시 1개의 밸브만 열려도 반응억제제가 투입될 수 있게 하였다.

주택용 가스배관 체크앵글 안전밸브 개발 연구 (Development of Check Angle Safety Valve for Residential Gas Piping)

  • 임상호
    • 산업진흥연구
    • /
    • 제2권1호
    • /
    • pp.9-13
    • /
    • 2017
  • 본 연구는 주택용 가스배관 체크앵글 안전밸브에 관한 것으로 긴급 발생시 1초 이내에 수동으로 차단이 가능하고, 또 손의 힘으로 가압 3kg에 터치가 가능 하도록 하고, 또 긴급시 차단 작동 후 차단 볼 지름이 7mm로 번복 사용이 가능하도록 기술 개발 하였다. 연구결과 첫째 밸브 작동 후. 평균 0.61 초로 나타났다. 따라서 안전밸브로서 사용하여도 작동에는 문제가 없는 것으로 나타났다. 둘째, 손의 힘으로 가압 3kg이내 터치에 모두 작동 되었다. 셋째, 차단 볼 지름이 7mm로 번복 사용한 결과 모두 이상 없는 것으로 나타났다. 본 연구에서 가스배관 체크앵글 안전밸브를 개발하고 기존 밸브와의 시험을 통하여 성능을 검증한 것에 의미가 있다.

시동/정지 반복에 의한 데드엔드형 고분자전해질 연료전지의 성능 감소 (Performance Degradation of Dead-end Type PEMFC by Startup and Shutdown Cycles)

  • 정재현;정재진;송명현;정회범;나일채;이호;박권필
    • Korean Chemical Engineering Research
    • /
    • 제51권5호
    • /
    • pp.540-544
    • /
    • 2013
  • 고분자전해질연료전지(PEMFC)는 시동/정지과정에서 성능과 수명이 감소한다. 본 연구에서는 캐소드가스로 산소를 사용하는 데드엔드 형 PEMFC의 시동/정지 과정의 영향을 분극곡선, 임피던스(EIS), SEM과 TEM을 사용해 연구하였다. 시동/정지 과정에서 PEMFC 성능감소를 막기 위해서는 더미 로드를 사용해야 함을 보였다. 시동/정지 반복과정 중 50% 상대습도(RH)에서 캐소드 카본지지체의 부식에 의한 열화가 100% RH보다 심했다. 데드엔드 형 PEMFC의 정지과정에서 PEMFC에 물을 공급해줌으로써 50% RH에서 열화속도를 감소시켰다.

지진 피해 최소화를 위한 지진 감지 시스템 개발 및 현장적용 연구 (Development of Seismic Monitoring System for Natural Gas Governor Station and It's Field Application to Minimize Earthquake Damage)

  • 유휘룡;박승수;박대진;구성자;조성호;노용우
    • 한국가스학회지
    • /
    • 제4권3호
    • /
    • pp.19-25
    • /
    • 2000
  • 지진 발생 시 일어날 수 있는 대규모 가스 폭발과 같은 2차 재앙을 미연에 방지하기 위해 천연가스 공급관리소에 설치하는 지진 감지 및 전송 시스템을 개발하였다. 천연가스 공급관리소에서 지진 감지 시스템을 효율적으로 설치하고 운용하기 위하여, 공급관리소의 지반 노이즈패턴 분석을 통하여 지반의 운동을 좀더 정밀히 계측할 수 있는 센서 설치 위치와 설치 방법을 제안하였다. 지진 발생 시 가스 차단 여부를 신속히 판단하기 위해 PGA(Peak Ground Acceleration)와 지진파가 가지는 에너지와 밀접한 연관성을 가지는 Sl(Spectrum Intensity)를 실시간으로 계산하는 알고리즘을 개발하였고 이를 지진 감지 시스템 내에 실현하였다.

  • PDF

수소충전소 실시간 이중 모니터링 시스템 운영을 통한 안전성 향상 (Status of the Real-time Safety Monitoring System of Hydrogen Refueling Station According to the Operation)

  • 이진우;박종희;김대현;탁송수;양병조
    • 한국가스학회지
    • /
    • 제25권6호
    • /
    • pp.92-97
    • /
    • 2021
  • 2021년 2월 '고압가스 안전관리법 시행규칙' 개정에 따라 2021년 8월27일부터 수소자동차 충전소에 설치한 가스누출검지경보장치, 긴급차단장치 및 화염검지기 등 안전장치 작동상태를 실시간으로 한국가스안전공사에서 관리하는 전산시스템으로 전송하여 운영하고 있다. 모니터링 시스템 구축결과와 함께 그동안 발생한 이상신호 통계분석 결과를 공유하여 수소충전소 안전관리에 활용토록 하고, 향후 안전관리 방향을 모색하고자 한다.

스마트 컨트롤 밸브 개발에 관한 연구 (A Study on the Development of Smart Control Valve)

  • 최영규
    • 한국정보전자통신기술학회논문지
    • /
    • 제12권6호
    • /
    • pp.582-590
    • /
    • 2019
  • 우리나라는 저출산·고령화가 진행함에 따라 전체 인구의 14%를 웃도는 고령사회에 진입함으로써 1인 세대의 증가라는 사회변화에 직면해 있다. 고령사회에서 1인 세대 증가로 인한 가스화재 사고를 예방할 수 있는 효과적인 방법은 컨트롤 밸브를 설치하여 설정시간이 지나면 강제적으로 가스를 차단하는 방법이다. 본 연구에서는 밸브 핸들을 돌리지 않고 택트 스위치를 눌러 모터를 이용하여 웜기어와 헬리컬 기어로 동력을 전달하여 밸브를 좌우 회전하여 개폐 할 수 있게 개발하였고, 컨트롤러와 탈부착이 쉽게 전용 밸브를 개발함으로써 조립 및 검사가 용이하고, 부품 수 및 제품 사이즈를 줄여 원가 절감을 통해 경쟁력을 강화할 수 있도록 개발하였다. 또한 내구성 시험을 통해 12초에 한 번씩 ON/OFF 반복하여 34시간 동안 10,000번을 수행하는 동안 안정적으로 동작 할 수 있도록하여 9년 이상을 사용할 수 있도록 개발하였다. 개발 방법은 Solid works와 Altium Designer 툴을 활용하여 기구 및 PCB 설계를 진행하였고, Firmware 개발은 IAR Embedded Workbench 환경에서 개발하였다.

전기차단성 소재 기술 (Technology of Electrical Barrier Material)

  • 신은미
    • Elastomers and Composites
    • /
    • 제46권1호
    • /
    • pp.22-28
    • /
    • 2011
  • 전기의 흐름을 막는 절연재료는 다양한 전기/전력기구에서 도체에 흐르는 전기를 차단하면서 도체와 외부를 분리/지지하는데 사용한다. 절연재료에는 유리, 절연유, 가스, 종이, 고분자가 있으며 현재는 주로 고분자 절연재료가 전선에 사용된다. 최근 환경규제 및 친환경 소재로의 변화에 따라 고분자 절연재료에 사용되는 물질들도 친환경 화하고 있다.

IOT기술을 이용한 유무선 통합 가스검출 시스템 구현 (System of gas sensor for conbinating wire and wireless using Internet of Things)

  • 방용기;강경식
    • 대한안전경영과학회지
    • /
    • 제17권4호
    • /
    • pp.297-304
    • /
    • 2015
  • This study concerns the integrated gas sensor system of wire and wireless communication by using IoT(Internet of Things) technology. First, communication part is that it delivers the detection information, which transferred by wire or wireless communication and required control procedure based on a wireless module that receives the gas leakage information from wired or wireless detector, to administrator or user's terminal. Second, receiver part is that it shows the location and information, which received from the wired detector formed by a detecting sensor's node as linking with the communication part, and transfers these to the communication part. Third, wireless detector formed as a communication module of a detecting sensor node is that it detects gas leakage and transfers the information through wireless as a packet.Fourth, wired detector communicated with the receiver part and formed as a communication module of a detecting sensor node is that it detects gas leakage, transfers and shows the information as a packet. Fifth, administrator's terminal is that it receives gas leakage information by the communication part, transfers the signal by remote-control, and shut off a gas valve as responding the information. Sixth, database is that it is connected with the communication part; it sets and stores the default values for detecting smoke, CO., and temperature; it transfers this information to the communication part or sends a gas detecting signal to user's terminal. Seventh, user's terminal is that it receives each location's default value which stored and set at the database; it manages emergency situation as shutting off a gas valve through remote control by corresponding each location's gas leakage information, which transferred from the detector to the communication part by wireless.It is possible to process a high quality data regarding flammable or toxic gas by transferring the data, which measured by a sensor module of detector, to the communication part through wire and wireless. And, it allows a user to find the location by a smart phone where gas leaks. Eventually, it minimizes human life or property loss by having stability on gas leakage as well as corresponding each location's information quickly.