• 분석과학
• /
• 제17권1호
• /
• pp.29-36
• /
• 2004

본 연구에서는 토양중에 존재하는 폴리브롬화 디페닐에테르 (polybrominated diphenyl ethers, PBDEs)를 동위원소희석법을 이용한 기체크로마토그래피/질량분석기-선택이온검색법에 의해 검출하는 분석방법을 소개하였다. 토양 중 PBDEs는 속실렛 장치로 추출하고 실리카와 플로리실 흡착제를 이용한 고체상 추출법을 비교하였다. 정제 후 추출물은 기체크로마토그래피/질량분석기-선택이온검색방법으로 분석하였으며, 동위원소로 치환된 4종의 PBDEs를 내부표준물질로 이용한 동위원소 희석법으로 8종의 PBDEs를 정량하였다. 속실렛추출 후 플로리실과 실리카 카트리지를 통한 회수율은 각각 30.8~110.8%, 44.4~110.7%이었다. 이 분석법의 검출한계는 0.04~0.3 ng/g로 나타났다.

• 대한금속재료학회지
• /
• 제48권12호
• /
• pp.1056-1063
• /
• 2010

We present a new joining method for Pd-Cu membrane foils used as permeation tubes to collect $CO_2$. Since foils have poor mechanical strength, joining should be done at low temperatures to reduce residual stresses and without joining pressure. This contradicts the well known conditions for good contact between base materials that determines joint qualities. We selected Sn-Ag-Cu alloys that are highly reactive with Pd and Cu as a filler metal. As the filler melts at joining temperatures as low as $220{\sim}280^{\circ}C$, Pd and Cu are dissolved into the melt and react with the filler elements, which raises the melting temperature of the filler based on eutectic structures among the elements. Then, isothermal solidification progresses for the rest of the joining time. Intermetallic compounds (IMC) in the joints, one of the main factors for brittle joints, are inevitably formed. However, by optimizing both joining time and temperature, we balanced the wettability with IMC. Sealing test results confirmed that the joints are mechanically reliable during operation.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.256-273
• /
• 2023

Among the dyeing industries, the tenter process is a process that improves the quality of fibers by drying and ironing (heat treatment) dyed fabrics, and drugs such as water repellents, antistatic agents, and fiber softeners are mainly used in these tenter processes. These drugs are vaporized in the process of treatment by high temperatures (180 ~ 230℃), and are observed in a complex form such as white smoke, oil mist, and fine dust, causing odor. To treat the complex exhaust gas at the rear end of the tenter facility, most companies operate by installing a wet scrubber and an adsorption tower alone or in parallel, but there are many problems. In particular, the insoluble oil mist at the rear end of the tenter has significantly low processing efficiency in the cleaning dust collection facility, and there is a problem in the facility by adsorption due to the occlusion phenomenon caused by the oil mist. In addition, the odor gas at the rear end of the tenter contains a lot of aldehydes, and in order to improve these various problems, a complex exhaust purification device using cyclone and electric support collector was developed. This study examined the applicability of economical and efficient technology by removing complex air pollution at the rear end of the tenter and applying improved technology than the existing technology.

• Composites Research
• /
• 제36권6호
• /
• pp.402-407
• /
• 2023

Activated carbon fibers (ACFs) are fibrous form of activated carbon (AC) with higher mechanical strength and flexibility, which make them suitable for building modules for applications including directional gas flow such as air and gas purification. Similarly, ACFs are anticipated to excel in the efficient capture of CO₂. However, due to the difficulties in fabricating monofilament carbon fibers at a laboratory scale, most of the studies regarding ACFs for CO₂ capture have relied on electrospun carbon fibers. In this study, we fabricated monofilament carbon fibers from PAN-based monofilament precursors by stabilization and carbonization. Then, ACFs were successfully prepared by chemical activation using KOH. Different weight ratios ranging from 1:1 to 1:4 were employed in the fabrication of ACFs, and the samples were designated as ACF-1 to ACF-4, respectively. As a function of KOH ratio, increase in surface area could be observed. However, the CO₂ adsorption trend did not follow the surface area trend, and the ACF-3 with second largest surface area exhibited the highest CO₂ adsorption capacity. To understand the phenomena, nitrogen content and ultramicropore distribution, which are important factors determining CO₂ adsorption capacity, were considered. As a result, while nitrogen content could not explain the phenomena, ultramicropore distribution could provide a reasoning that the excessive etching led ACF-4 to develop micropore structure with a broader distribution, resulting in high surface area yet deteriorated CO₂ adsorption.

• 멤브레인
• /
• 제21권4호
• /
• pp.367-376
• /
• 2011

매립지나 유기성폐기물의 혐기성소화에서 발생되는 바이오 메탄가스 혼합물에서 이산화탄소를 제거하고 고농도의 메탄을 연료로 정제하는 기술은 온실가스의 저감과 신재생에너지 개발의 두 가지 장점을 함께 가지고 있다. 고분자 소재를 이용한 분리막기술은 메탄의 분리에 경제적으로 적용될 수 있는 기술이다. 본 연구에서는 이산화탄소/메탄의 선택도가 50, 이산화탄소의 투과도가 3.4 barrer로 알려진 폴리이서설폰[1]을 고분자 소재로 사용하고, 비용매 첨가제로 폴리이서설폰을 잘 팽윤시키는 아세톤의 함량을 달리하여 비대칭 중공사막을 제조하였다. 아세톤의 함량 9 wt%, 방사높이 10 cm, 4 wt% PDMS 코팅을 거친 폴리이서설폰 중공사막은 이산화탄소 투과도 36 GPU 및 이산화탄소/메탄 선택도 46의 우수한 성능을 나타내었다. 최적조건의 비대칭 폴리이서설폰 중공사막을 이용하여 제조된 모듈의 이산화탄소/메탄 순수가스 및 혼합가스 투과특성을 압력, 유입조성의 변화에 따라 관찰하여 분리막 공정을 구성한 결과 10 atm의 압력조건에서 95%의 메탄을 58%의 회수율로 얻을 수 있는 것으로 나타났다.

• 멤브레인
• /
• 제29권2호
• /
• pp.88-95
• /
• 2019

올레핀은 석유화학산업에서 대부분의 물질의 근간이 되는 핵심적인 물질이며 특히 고분자 합성에 있어 매우 중요하다. 이러한 올레핀 물질을 효율적으로 분리/가공하는 공정은 산업발전에 있어 지대한 영향을 끼친다. 본 연구에서는 올레핀 물질 중 프로필렌 기체를 선택적으로 분리하는 고분자 복합막을 제조하여 투과 및 선택 성능을 증대시키고자 고투과성 매질인 poly(1-trimethylsilyl-1-propyne) (PTMSP)에 양친성 고분자를 이용하여 개질하였다. 또한 올레핀 분자와 상호작용이 있는 $AgBF_4$ 염 및 촉진수송을 극대화 시키기 위하여 이온성 액체인 $EMIM-BF_4$를 첨가하여 올레핀/질소 투과 분리 성능을 향상시켰다. 기존 PTMSP 복합막의 경우 굉장히 높은 자유부피를 가져 높은 기체 투과성능을 보이는 반면 투과시키고자 하는 기체에 대한 선택적인 분리 성능이 매우 떨어져 낮은 선택도를 보인다. 이를 극복하고자 양친성 고분자를 PTMSP 계면에 그래프트 공중합을 시켰으며 올레핀과 높은 상호작용을 보이는 $AgBF_4$ 염 및 $EMIM-BF_4$ 이온성 액체를 첨가하여 프로필렌/질소에 대한 선택도를 향상시켰다.

• 한국수소및신에너지학회논문집
• /
• 제16권3호
• /
• pp.262-268
• /
• 2005

[ $Zn(BH_4)_2$ ](8.4 wt% theoretical hydrogen storage capacity powders have been successfully synthesized by mechanochemical reaction from mixtures of $ZnCl_2$ and $NaBH_4$ powders in a 1:2 molar ratio in different times. $$ZnCl_2+2NaBH_4{\rightarrow}Zn(BH_4)_2+2NaCl$$ (1) $Zn(BH_4)_2$ powders were characterized by X-ray diffractometry(XRD), and Furier Transform Infrared spectrometry(FT-IR). The thermal stabilities of $Zn(BH_4)_2$ powders were studied by Differential scanning calorimetry(DSC), Thermogravimetry analysis(TGA), and Mass spectrometry(MS). $Zn(BH_4)_2$ can be tested for hydrogen evolution without further purification. The reaction to yield hydrogen is irreversible, the other products being compounds of Zn, and borane. $Zn(BH_4)_2$ thermally decomposes to release borane and hydrogen gas between about 85 and 150$^{\circ}C$.

• 공업화학
• /
• 제31권1호
• /
• pp.1-6
• /
• 2020

바이오가스를 이용한 수소 제조는 주요한 에너지 및 환경 관련 이슈들을 동시에 해결할 수 있다는 장점으로 꾸준히 주목받아 왔다. 바이오가스 정제를 통해 얻은 바이오메탄 수증기개질은 천연가스 개질을 대체할 수 있는 좋은 현실적인 대안이다. 하지만, 경제성과 환경 유해성을 모두 고려한다면 바이오가스를 직접 개질반응에 활용하는 바이오가스 수증기 개질 및 건식 개질을 활용한 수소 제조가 보다 효과적이라 평가된다. 본 논문에서는 바이오가스 기반 추출수소 제조 관련 최근의 기술 이슈 및 개발 동향을 소개하며 향후 상업화를 위한 효과적인 적용 방향에 대해서 고찰하고자 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.209.2-209.2
• /
• 2016

Up to now, Plasma applications are thought as a leading technology in industrial, chemical and even medical and biological field. Especially, Due to direct discharge in liquid with reaction in ambient solution, plasma in liquid is useful plasma technology. Such as electro-surgery, water purification, radical generation for synthesis. For using those plasma applications efficiently, plasma characteristics should be understood in advance. But discharge in liquid is not much well-known about its characteristics. And plasma discharge in solution is difficult to generate and analysis due to electrolysis, vaporization and radical generation. So, We make stable plasma discharge in solution(saline 0.9%) without input gas. We also analyze new type of plasma source in thermal and electrochemical view. And we check characteristics of plasma in liquid. For example, plasma density and radical density(OH) with optical emission, thermal energy with thermometer, electrical energy with oscilloscope and so on. And we try to explain the bubble and plasma formation with circuit analysis.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.175.1-175.1
• /
• 2016

In recent, tract infections such as atopic dermatitis, allergic rhinitis and a respiratory disease are increasing, giving rise to the atmospheric pollution, inflow of micro-size dust and side effect of humidifier disinfectant. In this context, the environment-friendly technology is required to eliminate airborne pathogens. We propose solution of the previous problems, making use of Radical Mist Generator (RMG). Existing technologies of air purification using a gas discharge produce harmful substances such as ozone, NOx, etc. However, the RMG uses a pure water as a plasma forming material. The RMG sprays the water mist, which contains reactive radicals to sterilize microorganisms. RMG is comprised of a power supply, plasma electrodes and a nozzle. In order to analyze the electrical characteristic and concentrations of reactive radicals, we employ an oscilloscope and a titration method. To test the sterilization effect of RMG, we used E.coli. We confirmed that E.coli was killed over 90%. Eventually, we expect that RMG can be promising tool for a purified system.