• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2197-2204
• /
• 2005

The combination of Gas chromatography (GC) for separation and Flame Ionization Detection (FID) for detection and identification of the components of a mixture of compounds is a fast and strongly proved method of analytic chemistry. The objective of this research was to design a combined High-speed miniature screening Gas chromatograph along with a Flame Ionization Detector for quick, quantitative and qualitative analysis of gas components. This combined GC-FID system is suitable to detect the volatile and semi-volatile hydrocarbons present in a gas mixture. The construction made it less expensive, easy to use and movable. The complete gas path was developed. On/off valves, temperature and flow sensors and their interface electronics were used for controlling purpose. A Microcontroller was programmed to measure the temperature and gas flow using the sensors and to control and regulate them using the electronics and valves. A pocket PC with its touch screen served as a user interface for the system. Software was developed for the pocket PC, which makes the communication possible with the Microcontroller. The system parameters can be indicated in the Pocket PC as simple text and also the analysis result can be displayed.

• Applied Biological Chemistry
• /
• v.35 no.5
• /
• pp.346-350
• /
• 1992

To investigate characteristic volatile components in Korean traditional soy sauce, this experiments were carried out. Whole volatile components were extracted by simultaneous steam distillation-extraction apparatus. The components of neutral fraction, emitting soy sauce-like odor, were fractionated from whole volatile components, and concentrated at atmosphere pressure, and then carried out GC-sniff evaluation and GC-fractionating collection by preparative gas chromatograph attached fraction collector APP-5. The GC-collected components were identified by GC/MS. The results were as follows; The component, emitting disagreeable odor, was identified as 3-methyl-1-butanol. The components, emitting soy sauce-like odor, were identified as dimethyl trisulfide, benzeneacetaldehyde, benzeneethanol.

• Food Science and Biotechnology
• /
• v.18 no.1
• /
• pp.18-24
• /
• 2009

The volatile compounds of dried sancho (Zanthoxylum schinifolium), an aromatic plant were extracted by simultaneous distillation and extraction (SDE) method and identified by gas chromatograph-mass spectrometry (GC-MS). Selected chiral constituents of sancho oil were characterized by enantiodifferentiation using multidimensional gas chromatograph (MDGC)-MS. A total of 57 compounds were identified and quantified, and the major compounds were identified estragole, nonanoic acid, octanoic acid, $\beta$-phellandrenene, and limonene. Among them, estragol (63.9%) was found as the predominantly abundant component of sancho. $\alpha$-pinene and nerolidol, and $\beta$-pinene and linalool were determined to be enantiomerically pure (100%) for their (S)-form and (R)-form, respectively. The enantiomeric composition of limonene in sancho revealed 83.9% purity for the (S)-enantiomer, whereas (E)- and (Z)-rose oxides showed mixtures of both enantiomers. The enantiomeric excess (%) for citronellal was 22.6% with the (R)-enantiomer as major enantiomer. The enantiomeric composition of these compounds can be used as parameter for authenticity control of sancho.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.507-511
• /
• 2019

Hydrogen permeability is widely used to evaluate the polymer membrane durability of polymer electrolyte fuel cells (PEMFC). Linear sweep voltammetry (LSV) is mainly used to measure hydrogen permeability easily. There are many differences in LSV measurement method among researchers, and it is often difficult to compare the results. Therefore, in this study, we tried to confirm the accuracy by comparing the hydrogen permeability of LSV method and gas chromatograph which is difficult to measure but accurate value. The LSV method used the DOE and NEDO methods. When the hydrogen permeability was measured by varying the temperature and the relative humidity, the DOE LSV method showed an accuracy of less than 5% in the error range compared with the GC method. In the NEDO LSV method, the error was reduced when the hydrogen permeation current density was determined at the current value of 0.3 V as the DOE method.

• KEPCO Journal on Electric Power and Energy
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2017

After $SF_6$, which is being used in power equipment as an insulating material, is classified as one of the 6 major greenhouse gases, the maintenance and the refinement of used $SF_6$ started to get attention. In regard to this, KEPCO Research Institute (KEPRI) is developing $SF_6$ recovery and refinement technology starting with establishing a comprehensive $SF_6$ analysis system. With the analysis system, qualitative and quantitative analyses of the purity and the impurities of $SF_6$ before and after recovery, and before and after refinement have been carried out. The analysis system is comprised of GC-DID (Gas Chromatograph -Discharge Ionization Detector) for trace impurities analysis, GC-TCD (Thermal Conductivity Detector) for analyses of $SF_6$ purity and major impurities concentration from several hundred ppm up to percent range, GC-MSD (Mass Selective Detector) for analyses of impurities not included in standard gas, FT-IR (Fourier Transform-Infrared) Spectrometer for analysis of HF and $SO_2$, and moisture analyzer for analysis of moisture below 100 ppm. With this analysis system, complete analysis method of $SF_6$ has been established. This analysis system is being used in the maintenance of power equipment and the development of $SF_6$ recovery and refinement technologies. In this paper, the analysis results of four samples - gas and liquid phase $SF_6$ samples from a $SF_6$ refinement system before and after refinement are presented.

• Environmental Analysis Health and Toxicology
• /
• v.17 no.2
• /
• pp.117-123
• /
• 2002

A gas chromatographic method for the determination of airborne formaldehyde was established. In order to be highly detectable with the electron capture detector, formaldehyde was derivatized to its pentafluorobenzyl oxime form by reacting with O- (2,3,4,5,6- pentafluorobenzyl)hydroxylamine hydrochloride (PFBHA) at pH of 4.6 and temperature of 50$^{\circ}C$ for 1 hour. Air samples were collected into a Tedlar$\^$(R)/ bag followed by transferring into water contained in two impingers in series. Collection efficiency in the front trap was higher than 90％. Measurement of selected indoor and outdoor air samples showed higher formaldehyde concentrations in indoor air environments and the importance of ventilation for reducing indoor pollution.

• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.423-426
• /
• 2012

$Al_2O_3$/NiO powder was obtained through hydrolysis-condensation reactions and thermal treatments. An organic additive, triblock copolymer surfactant P123, was added to the starting materials to control the surface area and morphology. The synthesized powder was characterized by X-ray diffractometry (XRD), field-emission scanning electron microscopy (FE-SEM) and a Brunner-Emmett-Teller surface analysis (BET). The heterogeneous catalytic activity of this powder was applied to an epoxidation reaction of styrene and was monitored using a gas chromatograph with mass spectrophotometry (GC/MS).

• Journal of Korea Soil Environment Society
• /
• v.3 no.1
• /
• pp.3-9
• /
• 1998

This paper presents soil-gas surveying technique to delineate an area contaminated with volatile organic compounds, which are common solvents and constituents of gasoline. The sampling method of soil-gas surveying is 1) grab sampling, which actively takes sample using a pump, or 2) passive sampling, which takes sample through diffusion in a trap filled with absorbent. The grab sampling shows the level of contamination at a certain location at a certain time, while the passive sampling shows the change in the contamination at a certain location. The analysis of soil gas can be performed with 1) a small portable detectors such as PID (photoionization detector) or FID (flame-ionization detector) to measure the total hydrocarbon in the soil gas, 2) a gas detector tube, which is filled with indicator reagents and changes its color with concentrations of the gas of interest, or 3) a portable GC (gas chromatograph), which can analyze different compounds simultaneously. The soil-gas surveying technique is a much less expensive method to investigate area contaminated volatile organic compounds and thus can be used as a screening tool to identify an area, which needs to be further investigated.

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.159-167
• /
• 1992

An improved and accurate method for the determination of linear alkybenzene sulfonate(LAS) in river water is described by using gas chromatography and GC/MS. The gas chromatograph equipped with BP-5 capillary column was satisfactory for isolation of the homologues and isomers of LAS in river water. Four LAS homologues, $C_{10}$, $C_{11}$, $C_{12}$, $C_{13}$ alkyl chains were determined in Jungrang stream, Jinwi stream and down stream of Han river tributary. Especially $5-C_{11}$, $6-C_{11}$, $2-C_{12}$ and $6-C_{13}$, $7-C_{13}$ of LAS were identified by mass chromatogram. Different composition of LAS in standard and river water expressed the distribution and fate of LAS in river water. The remarkable reduced content of $C_{12}$ and $C_{13}$ in river water implied that the biodegradation of LAS more easily occured in longer alkylchain one. This method would be applicable for determination of LAS in water with high resolution and sensitivity.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.513-518
• /
• 2005

The co-pyrolysis characteristics of poly(vinyl chloride) (PVC) and polystyrene (PS) mixtures with ZnO have been studied by thermogravimetry (TG) and gas chromatograph-mass spectrometry (GC-MS) under various mixing ratios and reaction temperatures. From this work, it was found that the yield of liquid products increased as PS in mixtures increased, whereas that of gaseous products decreased. And as ZnO in mixtures increased, the yields of gaseous products and HCI decreased. The optimal reaction temperature for the maximum yield of liquids products and the control of HCI gas was $500^{\circ}C$.