• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.9
• /
• pp.751-759
• /
• 2015

In this study, we investigate the Characteristics of the flowfields of a circular cylinder having a small triangular prism at the upstream side. We measure the fluid force on the circular cylinder and obtain a visualization of the flow fields using particle image velocimetry (PIV). The experimental parameters employed were the width ratios (H/B = 0.2~0.6) of the triangular prisms to the circular cylinder's diameter, and the gap ratios (G/B = 0~3) between the circular cylinder and the triangular prism. We observed that the drag reduction rate and Strouhal number of the circular cylinder increased and then decreased with G/B in the case of the same H/B. The drag reduction rate increased with H/B in the case of the same G/B. In the case where the circular cylinder had a small triangular prism, the stagnation regions were represented in the upstream and downstream sides of the circular cylinder.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.327-334
• /
• 2013

Long-wave infrared detectors using the type-II InAs/GaSb strained superlattice (T2SL) material system with the nBn structure were designed and fabricated. The band gap energy of the T2SL material was calculated as a function of the thickness of the InAs and GaSb layers by the Kronig-Penney model. Growth of the barrier material ($Al_{0.2}Ga_{0.8}Sb$) incorporated Te doping to reduce the dark current. The full width at half maximum (FWHM) of the $1^{st}$ satellite superlattice peak from the X-ray diffraction was around 45 arcsec. The cutoff wavelength of the fabricated device was ${\sim}10.2{\mu}m$ (0.12 eV) at 80 K while under an applied bias of -1.4 V. The measured activation energy of the device was ~0.128 eV. The dark current density was shown to be $1.0{\times}10^{-2}A/cm^2$ at 80 K and with a bias -1.5 V. The responsivity was 0.58 A/W at $7.5{\mu}m$ at 80 K and with a bias of -1.5 V.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.685-694
• /
• 2016

Visibility of lane marking is impaired at night, or in case of rain, and thereby threatens traffic safety. Recently, various studies and technology have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment, improvement of lane marking visibility (32.7%) by applying phosphorescent material mixed paint, and expressway lane design standards alternative (length 6m, gap 12m, width 13cm: 27.8% of painted surface are reduced) adoption with ergonomic analysis. In this study, a set of cost-benefit analyses was performed for the cases where such techniques were applied. Based on the literature review, 26.9% of traffic accidents would be prevented by improving lane marking visibility by 32.7%; accident reduction benefit was calculated as much as 12.5 billion KRW. Meanwhile, total increased cost when introducing phosphorescent material mixed paint and lane design standards alternative is calculated as 30.6 billion KRW. However, economic feasibility could not be secured with 0.41 of cost-benefit ratio when applied to the expressway network as a whole. Additionally, cost-benefit (B/C) analysis was applied to each of the top 20 night accident hot spots and the results of B/C ratios were between 0.67 and 4.20, showing that 11 out of 20 spot sections of expressway can have economic feasibility. This results indicate, with this kind of pavement marking applied to accident hot spots in rural expressway, better visibility and economic feasibility can be guaranteed through traffic accident reduction. Some limitations and future research agenda have also been discussed.

• Journal of Global Scholars of Marketing Science
• /
• v.13
• /
• pp.71-88
• /
• 2004

Although the factors that affect the width of latitude of price acceptance is well documented, the attempt to develop a practice-oriented methodology to calibrate the region of price insensitivity (i.e., a latitude of price acceptance) for a given individual brand has been relatively rare. The researcher aims to try to full this gap by developing a conjoint analysis-based procedure that can be applied to many industries. Furthermore, we examine the difference in the latitude of price acceptance between on- and off-line transaction in stock industry in Korea. The conjoint analysis-based procedure was applied to measure the disaggregate price response curve for individual stock investment both on- and off line transaction channel. The curves from the samples enable us to estimate the individual choice probabilities corresponding to applied price points. Using t-test the differences in mean choice probabilities between the list price and another price point were tested, through which we can get the latitude of price acceptance for a given brand in stock market. These procedures were tested in on- and off-line stock market in South Korea. The results showed that investors on off-line channel have wider latitudes of price acceptance than the investors on on-line transaction system.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.4
• /
• pp.314-318
• /
• 2009

The aim of this study was to evaluate the clinical applicability of a ridge splitting technique for reconstruction of narrowed edentulous alveolar ridges for dental implantation. 41 patients with 47 edentulous areas were included in this study. After corticotomy of a rectangular buccal segment and about 3-4 weeks healing period, the alveolar ridge was splitted, implant was placed. The initial ridge width varied between 2.5 and 7.0mm, average was 3.99mm. 68 dental implants were placed, and the gap between the implants and the bone is filled with various bone graft material, or none. All splitted sites showed sufficient bone volume for insertion of the implants at the moment of implantation. Over 1 year of follow-up period, five implants(7.3%) had mobility in two patients, among them, 2 implants(2.9%) sustained infection and removed. And any other complications were not noted. Our conclussion is that ridge splitting of the narrow edentulous area is a reliable and safe procedure in horizontally deficient ridges.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.67-74
• /
• 2009

In this paper, the multi-band antenna with CPWG(Coplanar Waveguide with Ground) feed for telematics mobile devices is designed and fabricated. The proposed antenna improves the return loss characteristic by using open-circuited stub matching and rectangular slot in the radiation patch. In addition, CPWG structure makes up for the drawback of the CPW which is variation of impedance matching according to the gap variation of the feed line and the ground. The fabricated antenna has 1.4GHz ($1.43GHz{\sim}2.83GHz$, 65%) band width on -10dB (VSWR<2) and the maximum gains are 0.8dBi, 1.34dBi, 2.41dBi, 2.53dBi, 2.6dBi and 1.51dBi on each resonant frequency that are GPS $(1.564GHz{\sim}1.585GHz)$, PCS/DCS $(1.710GHz{\sim}1.984GHz)$, WCDMA $(2.170GHz{\sim}2300GHz)$, Bluetooth/Wi-Fi/WLAN $(2.4GHz{\sim}2.483GHz)$, WiBro $(2.3GHz{\sim}2.4GHz)$, SDMB $(2.605GHz{\sim}2.655GHz)$. It also has an omni-directional radiation pattern of H-Plane.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.6-13
• /
• 2010

In this study, Ga-doped ZnO (GZO) thin films have been fabricated on Eagle 2000 glass substrates at various substrate temperatures $100{\sim}400^{\circ}C$ and thin film thickness by RF magnetron sputtering in order to investigate the structural, electrical, and optical properties of the GZO thin films. It is observed that all the thin films exhibit c-axis orientation and a (002) diffraction peak only. The GZO thin films, which were deposited at $T=300^{\circ}C$ and 400 nm, shows the highest (002) orientation, and the full width at half maximum (FWHM) of the (002) diffraction peak is $0.4^{\circ}$. AFM analysis shows that the formation of relatively smooth thin films are obtained. The lowest resistivity ($8.01{\times}10^{-4}\;{\Omega}cm$) and the highest carrier concentration ($3.59{\times}10^{20}\;cm^{-3}$) are obtained in the GZO thin films deposited at $T=300^{\circ}C$ and 400 nm. The optical transmittance in the visible region is approximately 80 %, regardless of process conditions. The optical band-gap shows the slight blue-shift with increase in doping which can be explained by the Burstein-Moss effect.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.5
• /
• pp.15-20
• /
• 2007

We fabricated ZnO thin films on quartz substrate using pulsed laser deposition method and investigated structural and optical properties of ZnO thin films with various substrate temperatures. Regardless of the substrate temperature variation, all ZnO thin films had grown to (002) and the thin film deposited at 400 $^{\circ}C$ exhibited an excellent crystallinity having 0.24$^{\circ}$ of Full-Width-Half-Maximum (FWHM). In the result of photoluminescence property, UV and deep-level emission peaks were observed in all ZnO films and the emission peaks were changed with various substrate temperatures. An highest UV emission was exhibited on the specimen deposited at 400 $^{\circ}C$ and the FWHM of UV peak was 14 nm. The optical transmittance was about 85 % in visible region regardless of the substrate temperature. The comparison result of the bandgap energies obtained from optical transmittance and UV emission centers, the two values were about the same. From these results, it is found that UV emission center has close relationship with near band edge emission of ZnO thin film.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.169-179
• /
• 1984

The purpose of this study was to observe the effect of dental varnish applied with fluoride to dental pulp by comparing the groups of commercial fluoride product $Duraphat^{(R)}$, $Copalite^{(R)}$ after 1 Mole sodium fluoride application, Cavity $Sealer^{(R)}$ after 1 Mole sodium fluoride application with the control group not applied the dental varnish. After Cl V Cavity form was prepared on the buccal surface of the crowns with the total 75 teeth by using 5 dogs, average weight of 13.2Kg, dental varnish and silver analgram were placed. This study was performed by 3, 7, 21, 28, 56 days each. The dogs were sacrificed to extract the teeth, cut at the apical one fourth, and prepared histologic examination by fixing with 10% buffered formalin perfusion at sacrifice and decalcification in 10% nitric acid. The specimens were embedded in paraffin, stained with Hematoxylin and Eosin, and serially sectioned with 6 ${\mu}$width each. Microscopic evaluation of serial sections at the various time periods among the different groups revealed the following results: 1. In the control group, the marked change of the odontoblastic layer was showed on the 3 days group, and it was decreased gradually. Healing response, such as hyperplasia, was seen on the 28 days group and it was continued to the 56 days group. 2. In the experimental group with Cavity $Sealer,^{(R)}$ a slight hemorrhage was seen in the odontoblastic layer on the 3 days group, and the healing response with the hyperplasia of the odontoblast was showed on the 21, 28 days group. It was completely healed on the 56 days group. 3. In the Duraphat R group, a slight hemorrhage showed on the 3 days group and the disarrangement of the Odontoblastic layer was seen on the 7, 21, 28 days group. Odontoblasts showed hyperplasia on the 28 days group, and healed completely on the 56 days group. 4. In the $Copalite^{(R)}$ group, the 7 days group showed remarkable hemorrhage in the odontoblastic layer and stroma, and also it showed reticular degeneration with the disarrangement of the odontoblastic layer and congestion. Each group showed disarrangement. Healing ability of this group was greater than that of the control group, but less than that of the $Duraphat^{(R)}$ and Cavity $Sealer^{(R)}$ group.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.1
• /
• pp.12-18
• /
• 1985

In general the impulse sound sources of underwater generated by electric arc discharge had used static energy of the charged capacitors. The author proposed an underwater arc discharge sound source using secondary voltage of high voltage transformer without capacitors. The arc discharge device was composed of a high voltage transformer and a switching system. The impulse current in the primary turn of the high voltage transformer is controlled by the switching system and inductive current of the secondary turn in the high voltage transformer is used in making impulsive arc discharge. A series of experiment have been carried out to observe the acoustic characteristics of the impulse sound source generated by the arc discharge. The results obtained were as follows: 1. Secondary current at the time of arc discharge keeps after ohm's law in the beginning and the maximum current flows out as soon as arc discharge breaks out. 2. A time difference between a start of applied current and a generation of arc discharge sound is the 3msec and it is generated arc sound when breaking down electric insulation at maximum voltage. 3. The sharper the end of electrodes and the higher the secondary voltage, the higher the sound pressure level. 4. Arc discharge sound was generated even at the distance of 100cm between electrodes and was stably reproductive at the gap of 1cm to 100cm. 5. Electric arc discharge sound wave is a shock wave of pulse-width of 0.15msec and spectral distribution of it is plenty of low frequency components less than 10 KHz.