• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2405-2423
• /
• 2012

In a traditional Single Sign-On (SSO) scheme, the user and the Service Providers (SPs) have given their trust to the Identity Provider (IdP) or Authentication Service Provider (ASP) for the authentication and correct assertion. However, we still need a better solution for the local/native true SSO to gain user confidence, whereby the trusted entity must play the role of the ASP between distinct SPs. This technical gap has been filled by Trusted Computing (TC), where the remote attestation approach introduced by the Trusted Computing Group (TCG) is to attest whether the remote platform integrity is indeed trusted or not. In this paper, we demonstrate a Trustworthy Mutual Attestation (TMutualA) protocol as a proof of concept implementation for a local true SSO using the Integrity Measurement Architecture (IMA) with the Trusted Platform Module (TPM). In our proposed protocol, firstly, the user and SP platform integrity are checked (i.e., hardware and software integrity state verification) before allowing access to a protected resource sited at the SP and releasing a user authentication token to the SP. We evaluated the performance of the proposed TMutualA protocol, in particular, the client and server attestation time and the round trip of the mutual attestation time.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.82-86
• /
• 2013

The automotive weather strip has the functions isolating of dust, water, noise and vibration from outside. The core of weather strip is made of steel with stiffness. By using the wire formed as the core of weather strip, weight can be reduced as much as 35% by comparing with existing steel core. For this reason, forming wire is necessary to keep the zigzag shape as it is. The deformation which is occurred during forming process can be predicted and it can be used in case of manufacturing dies through CAE. In this paper, rolling process conditions are deduced and the springback amount is predicted after rolling process by using the simulation. The springback amount of product is measured by using optical microscope, and measurement result is compared with the simulation result of springback as the same condition. The suitable gap between dies to compensate springback after rolling process is predicted through simulation and it is used for manufacturing dies.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.3
• /
• pp.144-148
• /
• 2001

For the purpose of developing capacitive humidity sensor having interdigit electrodes, interdigit electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thichness. For the development of ASIC, switched capacitor signal conditioning circuits for capacitive humidity sensor were designed and simulated by cadence using 0.25um CMOS process parameters. The signal conditioning circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is 0.4%R.H./$^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of 3%R.H. ${\sim}$ 98%R.H.. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigit electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc..

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.44-47
• /
• 2003

In this paper, the electric field distribution in dielectric tube with one layer and spherical dielectric($ZrO_2$) in water was simulated. The reactor was made up of the spherical dielectric that is diameter : 3.0[mm], $ZrO_2(\varepsilon_r:10)$ and one glass plate of thickness(2[mm]), $\varepsilon_r$(10) as electrode. The discharge gap was 8[mm]. To get more strong electric field, the dielectric constant should be higher comparatively. Using the spherical dielectric for water discharge in dielectric tube, the location of equipotential line was shifting from the interior to the exterior. At real water discharge experimental, ozone was measured higher dissolved ozone in water at condition of water rate(l[l/min]) and injector than condition of non-injector or 2~3[l/min].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.40-43
• /
• 2003

In this paper, the electric field distribution in dielectric tube with one layer and spherical dielectric(glass) in water was simulated. The reactor was made up of the spherical dielectric that is diameter : 3.0[mm], glass(${\varepsilon}_r$:5) and one glass plate of thickness(2[mm]), ${\varepsilon}_r$(5) as electrode. The discharge gap was 8[mm). Toget more strong electric field, the dielectric constant should be higher comparatively. Using the spherical dielectric for water discharge in dielectric tube, the location of equipotential line was shifting from the interior to the exterior. At real water discharge experimental, $H_2O_2$ was measured higher generated $H_2O_2$ in water at condition of water rate(1[l/min]) and injector than condition of non-injector or 2-3[l/min])

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.1001-1007
• /
• 1995

A Comprehensive Vibration Assessment Program (CVAP) has been performed for Yonggwang Nuclear Power Plant Unit 4 (YGN 4) in order to verify the structural integrity of the reactor internals for flow induced vibrations prior to commercial operation. The theoretical evidence for the structural integrity of the reactor internals and the basis for measurement and inspection are provided by the analysis. Flow induced hydraulic loads and reactor internals vibration response data were measured during pre-core hot functional testing in YGN 4 site. Also, the critical areas in the reactor internals were inspected visually to check any existence of structural abnormality before and after the pre-core hot functional testing. Then, the measured data have been analyzed and compared with the predicted data by analysis. The measured stresses are less than the predicted values and the allowable limits. It is concluded that the vibration response of the reactor internals due to the flow induced vibration under normal operation is acceptable for long term operation.

• Journal of Ship and Ocean Technology
• /
• v.8 no.4
• /
• pp.1-9
• /
• 2004

High lifting devices used for control purposes have received much attention in the marine field. Hydrofoils for supporting the hull, roll stabilizer fins for developing the motion damping performance, rudders for maneuverability are the well-known devices. In the present study, the ability of the rudder with flap to produce high lift was analyzed. The boundary layer control, one of the flow control techniques, was adopted. Especially, to build the blown flap, a typical and representative type of a boundary layer control, a flapped rudder was designed and manufactured so that it could eject the water jet from the gap between the main foil and the flap to the flap surface tangentially. And it was tested in the towing tank. Simultaneously, to know the information about the 2-dimensional flow field, a fin model with similar characteristics as the rudder model applicable for the motion control was made and tested in the cavitation tunnel. In addition, local flow measurements were carried out to obtain physical information, for example, a surface pressure measurement and flow visualization around the flap. And CFD simulation was used to obtain information difficult to collect from the experiment about the 2-dimensional flow.

• Corrosion Science and Technology
• /
• v.16 no.6
• /
• pp.273-277
• /
• 2017

Atmospheric corrosion is clearly the most noticeable of all corrosion processes. A tremendous amount of economic losses are caused by atmospheric corrosion. Thus, it is imperative to know the level of atmosphere's aggressiveness or in other words "corrosivity", before designing or planning any corrosion prevention strategy. In Singapore, corrosivity values were not recorded earlier though the process of measurement and recording was prevalent in other countries. With an aim of filling this gap, three test sites were setup at three locations in Singapore to represent marine, industrial and urban atmospheres or their mixtures. Subsequently, corrosivity readings were measured and recorded according to ISO 9223:2012 for the first time in Singapore. Salient atmospheric constituents or parameters like time of wetness (TOW), $Cl^-$, $SO_2$, $NO_2$, $O_3$, and $HNO_3$ were measured at all sites over a period of time to categorize corrosivity of particular atmosphere. The effect of the atmosphere on corrosion of steel, Cu, Al, and Zn has also been investigated and quantified. "Estimated" and "determined" corrosivities were quantified and compared according to ISO 9223 standard. The study data along with final corrosivity measurements will be presented and discussed in the present work.

• Korean Management Science Review
• /
• v.21 no.2
• /
• pp.145-165
• /
• 2004

Frequently. lots of organizations have experienced the value discrepancy between the expected value and the realized value from IS (information systems) investments. Being positive or negative the difference is. however, the existence of discrepancy itself is an evidence of less-than-sound management and measurement of IS projects. Analyzing the factors that cause such discrepancy has become an issue of scrutiny both in academia and in practice. We model which factors. as predictors, will affect the value discrepancy, as dependent variables. in IS investment. This research will establish and examine the research model. the validity of category classification of value discrepancy factors and the perceptual level of IS value discrepancy by survey research. As a result of the survey research. the strategic alignment. the proper system design for staffs. the project planning capability. and interdepartmental task cooperation are perceived as the factors that significantly affect the value discrepancy. And known as IS success factors such as the managerial support, the change management, the standardized process. and the competitive investment are not significant factors. The research findings will provide and emphasize useful implications which factors should be deliberately investigated in IS investment both for practices considering IS deployment and for academia.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.681-693
• /
• 2020

This study sees a critical gap in the previous body of research, which it seeks to fill; the disclosure of the unemployment ratio correlation has only been measured by the level of economic growth. This study is to add investment variables and government expenditure variables that objectively aim to measure the level of effectiveness in handling the unemployment ratio, which is then a measurement of the effectiveness of unemployment. Economic growth is measured by its impact on income inequality through empirical, conceptual relationships as a critical review and economic strategy for the future. The research uses secondary data on Indonesian macro and microeconomics since 2003-2018, then testing uses a quantitative approach to correlation, regression, and scatterplot. The results of this study show correlations between variables, and volatiles on the graphs show a similar trend. In other words, variables are bound together and support each other. The strategy of prioritizing the scale of government expenditure and investment to reach the target is the primary concern, so that the economic cycle can be optimal and equipped to face the possibility of an economic recession in the future. Many factors cause complex income inequality, though investment does not show a correlation to income inequality.