• 대한임베디드공학회논문지
• /
• 제12권3호
• /
• pp.177-184
• /
• 2017

High performance non-volatile memory system can mitigate the gap between main memory and storage. However, no single memory devices fulfill the requirements. Non-volatile Dual In-line Memory Module (NVDIMM) consisted of DRAMs and NAND Flashes has been proposed to achieve the performance and non-volatility simultaneously. When power outage occurs, data in DRAM is backed up into NAND Flash using a small-size external energy storage such as a supercapacitor. Backup and restore operations of NVDIMM do not cooperate with the operating system in the NVDIMM standard, thus there is room to optimize its operation. This paper analysis the operation of NVDIMM and proposes a method to reduce backup and restore time. Particularly, data compression is introduced to reduce the amount of data that to be backed up and restored. The simulation results show that the proposed method reduces up to 72.6% of backup and restore time.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.146-150
• /
• 2015

Steel is produced through the steel-making process with a desired shape by a rolling press. Scrap is removed according to the sheet edge to improve the quality of the product. This machine is called a side trimmer. This study aimed to develop a side trimmer for automatically changing the width of the trimming knife without line stopping. This machine consists of a housing opening device and a turning device. The measuring technologies of sheet width, trimming knife rotation angle, and knife gap for increasing the control accuracy. This experiment was conducted to evaluate the performance of the developed technologies. It was reduced by 10% compared with the operation time of the conventional method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.378.2-378
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coil of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate force at air gap. (omitted)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.288-290
• /
• 1997

Pulsed laser ablation has been used to fabricate superconducting $YBa_2Cu_3O_{7-x}$(YBCO) thin films on MgO substrates. The epitaxial YBCO thin films were grown at $750^{\circ}C$ and oxygen partial pressure of 200 mTorr. The electrical property and the characteristics of the YBCO thin films have been studied by R-T measurement. scanning electron microscopy (SEM) and X-ray diffraction (XRD). A microstrip line resonator has been fabricated using YBCO superconducting thin films by photolithography and wet-etch process. The resonator has linear microstrip line separated by a gap of 0.278 mm. We observed a fundamental resonance peak at the frequency of 10.007 GHz.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.158-161
• /
• 2006

In this paper, we deal with EMI Analysis on Microstrip with Defected Ground plane. Specially, we investigate reflection, transmission, crosstalk, radiated emission on Microstrip with Defected Ground plane structure. And investigates undesired effects on various defected ground plane such as ground with split, slot, short end and open end gap. To analyze reflection, transmission and crosstalk of microstrip with defected ground plane, we used concept of the microstrip to slot line transition model. Besides, investigate radiated emission using FDTD Commercial tools such as CST MW

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1846-1849
• /
• 2002

A shorted-turn test was performed at the Sininchon combined cycle power plant on gas turbine generators. The test was conducted using a permanent flux probe and on-line diagnosis system. The flux probe installed in the generator air gap senses the field winding slot leakage flux and produces a voltage proportional to the rate of change of the flux. This pattern of flux variation is a signature unique to each field winding. We have also applied a voltage waveform analysis technique that can identify the pole location, slot number and number of shorted-turn with each slot.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.315-321
• /
• 2009

Since the KTX start its service on April 1st of 2004, KTX increased its share up to 17.4% (2008). It's the 2nd after the passenger car share of 59.2% in the national transportation, but the gap is still wide. In addition, because of the rise of goods' and oil price, the share of intercity express bus is growing up. Nevertheless Korail is trying to improve the train schedule and develop internodal transit system, the number of passengers of KTX is remain flat. KORAIL should start and proceed the tasks below. - Analysis of the 5 year's operation of KTX since the year of 2004 to make plans for the steady growth - development of the KTX operation plan for expansion of railway - preparing the operation of additional passenger rail services on the mail line for newly introduced trains. - expansion of KTX's service area after the introduction of KTX-II - introduction of other new trains - examination for the action plans to promote marketing in main-line including refinement of the rate structure

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.227-229
• /
• 2002

본 논문에서는 마이크로스트립 라인 전압제어 가변 대역통과필터를 제안한다. 박막 강유전체의 상대 유전율은 인가 전압에 따라 변하는 특성을 이용하였고, Au/BSTO/MgO/Au 구조로 설계하였다. 커플링 수가 3개인 공진기를 연결하여 공진기 사이의 간격을 잘 조절한 격과, 중심 주파수 16 GHz 에서 1.9 GHz의 튜닝 범위, 800MHz 내의 좁은 대역폭, 3dB 이내의 작은 삽입손실을 갖는 필터를 설계할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.892-894
• /
• 1995

This paper deals with developmeant and application of coating thickness control system in hot dip galvanizing process. According to the line conditions, such as line speed, strip size and target coating weight, a predictive preset model sets the initial oprating conditions. Referring the zine coating informations from the gauge, mean coating value controller adjusts the chamber pressure and horizontal distance between strip and air knife, while coating deviation controller adjusts the lip gap profile of the air knife. All adaptive gains are interactively calculated by numeric models based on the theoretical analysis. The operating result with this system effectively reduces the coating deviation in transverse direction as well as in longitudinal direction.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.417-422
• /
• 2002

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric errors, thermally-induced errors, and the deterioration of the machine tools. Geometric and thermal errors of machine tools should be measured and compensated to manufacture high quality products. In metal cutting, the machining accuracy is more affected by thermal errors than by geometric errors. In this study, the compensation device and temperature-based algorithm have been implemented on the machining center in order to compensate thermal error of machine tools under the real-time. The thermal errors are predicted using the neural network and multi-regression modeling methods. In order to compensate thermal characteristics under several operating conditions, experiments performed with five gap sensors and manufactured compensation device on the horizontal machining center.