• 토지주택연구
• /
• 제5권2호
• /
• pp.81-89
• /
• 2014

이 논문에서는 최근 관심을 모으고 있는 강재프레임 모듈러주택의 건식 바닥시스템을 대상으로 바닥충격음 차단성능을 확보하기 위하여 시도된 다양한 바닥구조의 실험결과에 대하여 제시하고 있다. 실험결과, 단위모듈 건식온돌 바닥구조는 완충구조로서 액체몰을 사용한 바닥구조 D31(D32)를 사용하는 조건에서 경량충격음의 경우 주택건설기준 등에 관한 규정에서 정하고 있는 바닥충격음 차단성능의 1등급 수준의 확보가 가능하고, 중량충격음의 경우는 바닥충격음 차단성능의 최저등급이기는 하나 기본적인 성능의 확보가 가능한 것으로 평가되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.320-320
• /
• 2014

Amorphous silicon alloy (a-Si) solar cells and modules have been receiving a great deal of attention as a low-cost alternate energy source for large-scale terrestrial applications. Key to the achievement of high-efficiency solar cells using the multi-junction approach is the development of high quality, low band-gap materials which can capture the low-energy photons of the solar spectrum. Several cell designs have been reported in the past where grading or buffer layers have been incorporated at the junction interface to reduce carrier recombination near the junction. We have investigated profiling the composition of the a-SiGe alloy throughout the bulk of the intrinsic material so as to have a built-in electrical field in a substantial portion of the intrinsic material. As a result, the band gap mismatch between a-Si:H and $a-Si_{1-x}Ge_x:H$ creates a barrier for carrier transport. Previous reports have proposed a graded band gap structure in the absorber layer not only effectively increases the short wavelength absorption near the p/i interface, but also enhances the hole transport near the i-n interface. Here, we modulated the GeH4 flow rate to control the band gap to be graded from 1.75 eV (a-Si:H) to 1.55 eV ($a-Si_{1-x}Ge_x:H$). The band structure in the absorber layer thus became like a U-shape in which the lowest band gap was located in the middle of the i-layer. Incorporation of this structure in the middle and top cell of the triple-cell configuration is expected to increase the conversion efficiency further.

• 한국산학기술학회논문지
• /
• 제17권4호
• /
• pp.319-324
• /
• 2016

입도분포가 다양한 입자크기로 이루어져 있는 지반은 일반적으로 지반의 강도가 좋다. 입도분포가 다양하지 않음에도 충분한 지지력을 가지고 있는 지반이 더러 있는데, 이러한 지반의 특징은 Gap 입도로 분포되어 있다는 것이다. 이를 바탕으로 유추하여보면 입자의 크기가 다양하지 않더라도 적절한 입도의 배치를 통해 강한 지반이 조성될 수 있음을 알 수 있다. 이 연구에서는 임의로 조성한 Gap 입도시료와 well, uniform 입도시료와의 내부마찰각의 변화에 대하여 고찰하였다. 큰 입자와 작은 입자 크기의 비율에 따라서 시료를 조성한 후 직접전단시험을 수행하여 지반의 강도정수를 구하고 결과를 비교 분석하였다. 연구결과 시료의 입자크기비와 내부마찰각을 연관시킬 수 있었으며 입도의 분포가 Gap이라고 하더라도 주어진 조건에서 가장 큰 입자 크기비를 가지고 있는 시료가 다양한 입도분포의 시료보다 큰 마찰력을 가질 수 있음을 알 수 있었다. 또한 중간입자크기를 가지고 있는 시료로 조성한 uniform시료보다도 같은 입자 크기의 Gap 입도 시료가 더 큰 강도를 지니고 있었다. 비교적 간단한 입도의 조정만으로도 대상 지반의 강도를 추가적으로 증대시킬 수 있는 공법개발의 기초를 확립하였다.

• 농업과학연구
• /
• 제22권2호
• /
• pp.231-243
• /
• 1995

This paper aims to study regional difference in strawberry farming technology and its causal factors based on the survey of controlled strawberry farmers in three major strawberry cultivating regions, which are Nonsan county of Chungnam Province, Damyang County of Junnam Province and Guchang County of Kyungnam Province. There are differences in variety adoption, packaging and grading method which cause the farming income gap among these regions. Farmers of Guchang County, who adopt new variety Yeobong and packing system, raised highest gross receipts but ranked next to Damyang in terms of net income because of high packing cost. Farmers of Nonsan County earned lowest income because of poor quality and low price in spite of adopting packing cost saving method. Therefore, results of this study shows that successful farming technology depend on whether or not farmers adopt market oriented technology. It is suggested that direction of strawberry farming technology should focus on adopting new varieties which can contribute to increasing farmers' paid price and developing technology of reducing cost such as labor saving and packing machine.

• 한국산업융합학회 논문집
• /
• 제24권4_2호
• /
• pp.501-507
• /
• 2021

In this study, In order to prevent the safety accidents caused by the sliding, to develop the non-slip grating, the stability judgment based on the span length of the grating and the gap of the bearing bar is performed. The structural analysis of Grating was carried out in accordance with the provisions set out in Grating's load-bearing test conditions. As the span length increases, the deflection increases and the stress and span length tend to be proportional to each other. It was shown that the larger the span, the linear increase in stress and exponential increase in deformation of grating. The maximum stress of grating was approximately 58.2 MPa, indicating a very stable safety rate of about 4.3 compared to the yield strength of the grating material. Based on these results, it will be able to be utilized as the basic data for determining the optimal dimensions of non-slip grading by performing optimal designs in the future.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권6호
• /
• pp.63-72
• /
• 2012

고유동 콘크리트는 일반 콘크리트에 비해 고가의 각종 혼화재료를 과량 혹은 추가로 사용하여야 하기 때문에 재료비 단가 상승, 추가 설비의 필요 등의 문제점이 있고, 재료분리를 방지하기 위해 분체량을 증가시킴으로써 과잉 강도발현 등 고유동 콘크리트가 갖고 있는 많은 장점이 있음에도 특수 목적이외에는 그 사용에 있어 제약이 있었다. 이에 본 연구에서는 기존에 개발된 고강도성 고유동 콘크리트와 달리 일반 강도의 고유동 콘크리트의 상용화를 위해 콘크리트 구성 재료 중에서 골재를 중심으로 이들의 합리적 활용과 콘크리트의 성능향상 모색을 위해 정량적 인자별 실험을 수행하였다. 사용한 실험변수로 물-시멘트비, 잔골재율, 골재의 조립률, 입자 크기의 중요도, 13mm 골재와 미립분의 활용에 대해 검토하였으며, 슬럼프플로와 U형 충전시험의 충전고차로 평가하였다. 연구결과, 고유동 콘크리트 성상은 굵은 골재보다 잔골재 입도에 대한 의존도가 높으며, 잔골재율이 높을수록, 조립률이 낮을수록 충전성과 유동성 확보에 유리하였다. 또한, 골재의 대체재로써 13mm 골재 및 미립의 석분을 활용함으로써 보다 효율적으로 충전성과 유동성을 향상시킬 수 있음이 본 연구를 통해 확인되었다.

• 대한족부족관절학회지
• /
• 제16권2호
• /
• pp.87-93
• /
• 2012

Fractures located at the metaphyseal/diaphyseal junction at the base of the fifth metatarsal were first described by Sir Robert Jones in 1902. However, ever since, there has been disagreement and debate regarding the diagnosis, classification, pathomechanics, the incidences, and potential causes of delayed unions and nonunions, and the optimal method of treatment. It appears to be widely agreed that proximal fractures of the metaphyseal/diaphyseal region of the fifth metatarsal are prone to delayed union or even nonunion. Several classifications of proximal fifth metatarsal stress fractures have been devised. Torg et al. classified fractures involving the proximal part of the diaphysis of the fifth metatarsal into three types. The Torg classification is a good grading system that can be used to determine the type of surgery needed as well as for the prediction of prognosis. The ''plantar gap'' might add to the decision-making process for surgery and improve the prediction of patient prognosis. In addition, the new classification using 'plantar gap' might be used for classification of fifth metatarsal stress fracture. Fifth metatarsal stress fractures can be treated conservatively or surgically, and excellent results have been reported for surgery with rapid recovery in athletes. Intramedullary screw fixation has become a popular form of fixation for fifth metatarsal stress fractures. Bone grafting presents the problems of a longer recovery time and additional skin incision for harvesting. The modified tension band wiring is an useful and simple option for surgical treatment of challenging fifth metatarsal stress fractures.

• Journal of Information Technology Applications and Management
• /
• 제18권3호
• /
• pp.31-39
• /
• 2011

The weakening of the traditional cultures is becoming more evident from the final quarter of the last century, a period of time where the world starts to look like a "small village" in all means. A substantial cause of cultural deterioration shows to be the growing use of information and communication technologies widening the views, mentalities, and perspectives of people. Today the adolescent groups frequently owning, utilizing and consequently being charmed by the electronic equipment such like computers, internet and cellular phones have developed a unique tradition/practice in sensing and meaning life triggering larger generation gap and fading of established cultures. The main focusing of the paper is on the correlation between computer and internet use and life satisfaction, level of hope, personal development assessments and expectations of the adolescent groups in Turkey. Interpretation of the survey findings indicates that this group grading highest in use of that shows to be the happiest, most hopeful and optimistic ones among other groups. Methodologically, the study is based on data analysis and a review of recent key literature. For more dependable results a further study comparing similar tendencies of the similar groups of other nationalities is recommended.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제5권1호
• /
• pp.45-58
• /
• 2001

This study sheds light on the importance of developing creativity in mathematics class by examining the theoretical base of creativity and its relationship to mathematics. The study also reviewed the realities of developing creativity in mathematics courses, and it observed and analyzed the processes in which students and teachers solve the mathematics problems. By doing so, the study examined creative abilities of both students and teachers and suggests what teachers can do to tap the potential of the student. The subjects of the study are two groups of students and one group of mathematics teachers. These groups were required to solve a particular problems. The grading was made based on the mathematical creativity factors. There were marked differences in the ways of the solutions between of the student groups and the teacher group. It was clear that the teachers\\` thinking was limited to routine approaches in solving the given problems. In particular, there was a serious gap in the area of originality. As can be seen from the problem analysis by groups, there was a meaningful difference between the creativity factors of students and those of teachers. This study presented research findings obtained from students who were guided to freely express their creativity under encouragement and concern of their teachers. Thus, teachers should make an effort to break from their routine thinking processes and fixed ideas. In addition, teaching methods and contents should emphasize on development of creativity. Such efforts will surely lead to an outcome that is beneficial to students.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.79-88
• /
• 1999

Most difficulties of inducing high fluidity on the concrete mixing design with a strength range of 210 to 240kg/$\textrm{cm}^2$ result from the segregation of aggregates due to the shortage of cementitious binders. To solve the problem, this study concentrated on finding the optimized amount of binder material which does not affect the concrete strength and is also economical. Also there were studies on the use of intermediate sized aggregates to avoid the gap-grading between coarse and fine aggregates so that the material segregation in high flowing concrete was and minimalized the fluidity and penetration capacity of the reinforcing bars was enhanced. Throughout the parametric study with respect to water/binder ratio. superplasticizer. replaceable mineral admixture, the size of coarse aggregate and mixing methods, the effect of each constituent on the characteristics of high flowing concrete could be observed. As a result or partially using stone powder or an intermediate class of aggregate (max. diameter 13mm) . it was fund that the fluidity of concrete significantly increased without material segregation and any change of compressive strengths. It was also proved in this study that proper mixing time and speed are significant factors influence the performence of high flowing concrete.