• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.183-188
• /
• 2014

Solenoid operated electromagnetic control valve (ECV) using in an external variable displacement swash plate type compressor is widely used for air conditioning control system because of its low energy consumption and high efficient characteristics. ECV controls the entire vehicle air conditioning system by means of a pulse width modulation (PWM) system that supplied from an external controller. Different pressure ports located within ECV has important functions to control the air/refrigerant flow through its internal passages. The flow paths are preciously maintained with acceptable ranges of leakage (gap) between the parts inside it which is followed by effective design and critical dimensioning of its internal features. Therefore, it saves energy losses from the solenoid operation as well as ensures the balance of forces within it. The research paper highlights analysis of the leakages (at different pressure ports) and dimensioning tolerance factors that affects the ECV performance.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1932-1938
• /
• 2003

We have applied spectroscopic ellipsometry to investigate $high-{\kappa}$ dielectric thin films and correlate their optical properties with fabrication processes, in particular, with high temperature annealing. The use of high-k dielectrics such as $HfO_{2}$, $Ta_{2}O_{5}$, $TiO_{2}$, and $ZrO_{2}$ as the replacement for $SiO_{2}$ as the gate dielectric in CMOS devices has received much attention recently due to its high dielectric constant. From the characteristics found in the pseudo-dielectric functions or the Tauc-Lorentz dispersions, the optical properties such as optical band gap, polycrystallization, and optical density will be discussed.

• The Journal of Korean Physical Therapy
• /
• v.16 no.4
• /
• pp.235-245
• /
• 2004

The purposes of this study are to develop 'Squat Scoring Scale' and identify relationship between squatting score and flexibility of the lower extremity muscles such as quadriceps femoris and soleus in terms of relationship between squatting and functions of lower extremity. Subjects have normal gait patterns only with or without musculoskeletal problems of lower extremities, lumbar and pelvis and gender. There are sixty subjects who participated in this study. The scoring are checked after squatting posture according to 'Squat Scoring Scale', and measured ROM of the ankle dorsiflexion and knee flexion for flexibility of the soleus and quadriceps femoris, respectively. Fourteen of sixty subjects have 10 score, seventeen subjects have 9 score, seven subjects have 8, 7 and 6 scores, three subjects have 5 score, and five subjects have 4 score. The gap between 10 to 9, 9 to 8 and 8 to 7 score in all values of angles has the statistical significance for t-test(p<.05). This information indicates that flexibility of quadriceps femoris and soleus acts as important factors in squatting.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.257-266
• /
• 1999

In this paper, a spline-type divided-difference interpolation technique is proposed to efficiently evaluate the impedance matrix elements in the MoM analysis of layered medium problems. This method is combined with the fast computational method of the basis-expanded and tested dyadic Green's functions (expressed in the spectral domain integrals) in a recent literature. For the sake of its validity, the proposed method is applied to analyze the characteristics of a microstrip gap discontinuity, a microstrip filter, and an aperture coupled patch antenna. Numerical results obtained by this approach are in good agreement with those of other approaches.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.34
• /
• pp.51-60
• /
• 1995

The key competition factor of manufacturing industries has progressively changed from cost to quality and time. Recently, the manufacturing environments more rapidly change than before. So, many companies want to introduce a advanced manufacturing system like CIMS to meet various user's needs and short delivery. But there is a considerable gap between the decision to invest and the achievement of promised benefits. Managers, generally, cannot afford CIM invesment unless they can determine beforehand that CIM will work in thier company and that will provide a coherent strategy and satisfactory return on investment In many cases, it is impossible to justify CIM investment by only economical analysis. Decision making problems like CIM investment are of a multiple objective nature. So, decision making process and multiattribute utility function are very useful methods to evaluate CIM justification In this paper, we described the key functions of CIM justification evaluation using IDEF methodology and developed the applicattion procedure of DMP and MUF method for CIM justification.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.998-1003
• /
• 2003

The aerodynamically excited vibration and natural frequency of rotating CD and DVD disks are analytically and experimentally studied in this paper The theoretical analysis uses a fluid-structure model where the aerodynamic effects are represented in terms of elastic, lift and damping components. The explicit expression on natural frequency of the air coupled disk is obtained as functions of the three aerodynamic coefficients. The experiments performed using a vacuum chamber and CD/DVD disks rotating in vacuum, open air and enclosure give three main results. One is that the aerodynamic effect by the surrounding air reduces the natural frequencies and critical speeds of the vibration modes. The second is that natural frequency of disks rotating in open air is larger than that in enclosure. Finally, it is shown that the disk vibration is reduced as the gap between the disk and the rigid wall decreases.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1644-1654
• /
• 2018

Eigenvalue distributions for a periodic metal-insulator-metal waveguide, classified into the point spectrum and the discretized continuous spectrum (DCS), are investigated as functions of frequencies, gap widths, and periods. Muller's method is suggested for solving exact eigenvalues, and we propose the scheme for finding proper initial values in the Muller's method by considering only ${\Re}e({\varepsilon}_r)$ in the dispersion equation. We then find that anti-crossing behavior, repulsive effect between the point spectrum and the DCS, becomes stronger when the real parts of the roots in the point spectrum have smaller values. Finally, we examine the transmittances of a single subwavelength slit for real metals using the mode matching technique. The transmittances in real metals similarly follow those of the perfect electric conductor (PEC) at low frequencies, while the patterns at higher frequencies begin to differ from the PEC.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.2
• /
• pp.163-169
• /
• 2000

In this paper, we showed the erosion characteristic of MgO protector layer releated to lifetime of plasma display panel(PDP). We observed MgO erosion characteristic as a functions of deposition conditions, pressure and distance between electrodes. In RIE condition of Xe gas, the lowest erosion rate appears in the conditions of no heating bias voltage -30V and pressure 5mtorr. In general, as deposition rate increases, erosion rate decreases. In real panel, when the gap distance between electrodes is narrow and the pressure is low, the heavy plasma damage appears. Also, the surfaces between electrodes and on the bus electrode are extremely damaged.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.10
• /
• pp.2670-2679
• /
• 1999

XML documents which are used for exchanging structured documents between heterogeneous distributed system are increasing recently. It needs an object-oriented visualization tool for XML documents. So, we propose rules and an algorithm to represent structure of XML documents using UML Class Diagram. It helps to generate XML documents which are included links by understanding easily constructs of them and reduce gap of schema for them between heterogeneous databases. We propose formal models and modeling functions of XML links which provide an efficient environment for processing object-oriented documents.

• 연구논문집
• /
• s.22
• /
• pp.47-54
• /
• 1992

A problem of relevant interest to some industries is that of optimum two-dimensional layout. The objective of this work is to allocate the shapes on a sheet in such a way to minimize the amount of waste. A nesting software has been developed to help user arrange the 2D parts effectively. It provides various functions, e.g., transformation, distance-check, NC post-processor, etc. This software is developed in X window system with C langusge. Final goal of this software is generating NC code data of the 2D parts on the sheet that can be directly used in NC machines.