• 한국잠사곤충학회지
• /
• 제41권2호
• /
• pp.94-101
• /
• 1999

Twelve pure silkworm lines identified based in higher G.C.A values from a line${\times}$Tecter crossing programme, were crossed with twelve breeds showing cocoon shell ratio>22% and hybrids prepared, evaluated in a Multiple index method. Seven hydrids showing average index value>50 in all the 10 economic characters were seclcted and evaluated in the laboratory. However, two hybrids viz., A3${\times}$935E and A3${\times}$916B were finally selected based on the superiority of the breeds in one day shorter larval duration and with and with higher reeling characters compared to control KA${\times}$NB4D2. The breeding procedure involed in evolution hybrids are discussed.

• Journal of the Optical Society of Korea
• /
• 제3권1호
• /
• pp.23-26
• /
• 1999

A simple technique to measure electro-optic coefficients has been developed. It is based on rotating analyzer polarimetry. With a coaxial configuration of the optically active polarizing devices, the synchronously digitized signals are Fourier analyzed to quantitatively determine the elliptical polarization of light and, hence, the electric field induced birefringence. This technique has the advantage that it does not require waveguiding, and since it is improved from the crossed polarizer method it measures the phase retardation directly. It has been applied for the precise determination of electro-optic coefficients of uniaxial LiNbO3 single crystals. The excellent agreeement with reported values confirms its usefulness toward accurate characterization of electro-optic coefficients of unknown specimens.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 추계 학술논문발표회 논문집
• /
• pp.77-81
• /
• 1998

$TiO_2$에 의한 광촉매 반응을 환경 분야에 도입시켜 본격적으로 연구하기 시작하기는 '80년대 후반부터의 일이다. 광촉매로는 $TiO_2$계 이외에 $SrTiO_3$계, $K_4$$Nb_{6}$$O_{17}$계가 알려져 있지만, $TiO_2$계 촉매가 보다 많이 연구되어져 있다.이처럼 $TiO_2$가 환경정화용 광촉매 등에서 주목을 받고 있는 이유는 $TiO_2$의 밴드갭(band gap) 에너지가 약 3.2ev로 390nm이하의 파장을 갖인 광에너지(UV)는 이들의 전자(electron)를 여기(exite)시키는데 충분한 것으로 알려져 있기 때문이다. 따라서 지금까지 사용된 광촉매로는 $TiO_2$(Degussa P-25) anatase type이 가장 많이 알려져 있으나 비표면적이 42$m^2$/g정도로 적어 효율성 떨어진다는 단점이 있어 비표면적을 크게하려는 노력이 꾸준히 연구되어 왔다. (중략)

• Transactions on Electrical and Electronic Materials
• /
• 제2권3호
• /
• pp.18-23
• /
• 2001

For the piezoelectric transformer application, Pb(Sb$\_$1/2/ Nb$\_$1/2/)O$_3$-Pb(Zr,Ti)O$_3$ ceramics were produced by attrition milling. Microstructural, dielectric and piezoelectric characteristics of the ceramics were investigated as a function of milling time. The particle size and grain size decreased while dielectric constant, density and mechanical quality factor (Q$\_$m/) increased with milling time. Temperature coefficient of resonant frequency (TCf$\_$r/) was shifted to positive side with increasing milling time. The attrition milling process proved to be one of the effective routes to produce transformers for high power application.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.198-199
• /
• 2002

연자성 재료는 투자율이 높고, 큰 포화자속 밀도를 갖는 재료로서 외부자계에 용이하게 자화되며, 그 용도를 살펴보면 전기에너지 변환, 자기기록. 변압기, 변성기, 각종 코아, 모터, 자기센서, 전ㆍ자계차폐재등 많은 전자기기에 이용되고 있다. 따라서 연자성재료는 기본적으로 결정자기이방성과 자왜가 작아야 한다. 한편 전기, 전자기의 경량화 및 고효율화를 위하여서는 포화자속밀도의 극대화, 고주파영역에서의 우수한 연자기 특성 및 저에너지 손실을 갖는 재료개발이 요구된다. (중략)

• Journal of the Optical Society of Korea
• /
• 제14권1호
• /
• pp.28-32
• /
• 2010

We demonstrate binary spectral phase coded waveform discrimination at 10 GHz for narrow band optical code-division multiple-access (NB-OCDMA) via direct electrical detection without using any optical hard-limiter. Only 9 phase-locked, 10 GHz spaced, spectral lines within a 100 GHz spectral window are used for the phase coding. Considerably high contrast ratio of 5 between signal and multiuser access interference noise can be achieved for $4{\times}10\;G\;pulse/sec$ timing coordinated OCDMA at a simple electrical receiver with 50 GHz bandwidth.

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.84-90
• /
• 2019

The varistor properties and stability against dc-accelerated stress of $V_2O_5-Mn_3O_4-Co_3O_4-Dy_2O_3-Nb_2O_5-Bi_2O_3$ (VMCDNB)-doped zinc oxide ceramics sintered at $850-925^{\circ}C$ were investigated. Increasing the sintering temperature increased the average grain size from 4.6 to 8.7 mm and decreased the density of the sintered pellet density from 5.54 to $5.42g/cm^3$. The breakdown field decreased from 5919 to 1465 V/cm because of the increase in the average grain size. Zinc oxide ceramics sintered at $875^{\circ}C$ showed the highest nonlinear coefficient (43.6) and the highest potential barrier height (0.96 eV). Zinc oxide ceramics sintered at $850^{\circ}C$ showed the highest stability: the variation rate of the breakdown field was -2.0% and the variation rate of the nonlinear coefficient was -23.3%, after application of the specified stress (applied voltage/temperature/time).

• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.955-960
• /
• 2012

We fabricated piezoelectric unimorph cantilever generators (UCG) using $Pb(Zr_{0.54}Ti_{0.46})O_3$ + 0.2 wt% $Cr_2O_3$ + 1.0 wt% $Nb_2O_5$ (PZCN) piezoelectric thick films, which were produced by a tape casting method. The PZCN thick films were tailored with same width and thickness but different lengths from 7.7 to 57.7 mm in order to evaluate optimized UCG for energy harvesting device applications. When the length of PZCN film was increased, the resonance frequency of UCG was slightly increased from 7 Hz to 8 Hz, which could be due to enlarged area of the highly stiff piezo-ceramic film. However, the output power was proportionally increased with the length of PZCT film and it reached 4.68 mW (1.221 $mW/cm^3$) when the film's length was 57.7 mm under 25 g of tip mass at 8 Hz, which is sufficient for micro-scale device applications.

• 한국재료학회지
• /
• 제34권2호
• /
• pp.116-124
• /
• 2024

In this study, we investigated the microstructure and piezoelectric properties of 0.96(K_0.456Na_0.536)Nb_0.95Sb_0.05-0.04Bi_0.5(Na_0.82K_0.18)_0.5ZrO₃ (KNNS-BNKZ) ceramics based on one-step and two-step sintering processes. One-step sintering led to significant abnormal grain (AG) growth at temperatures above 1,085 ℃. With increasing sintering temperature, piezoelectric and dielectric properties were enhanced, resulting in a high d₃₃ = 506 pC/N for one-step specimen sintered at 1,100 ℃ (one-step 1,100 ℃ specimen). However, for one-step 1,115 ℃ specimen, a slight decrease in d₃₃ was observed, emphasizing the importance of a high tetragonal (T) phase fraction for superior piezoelectric properties. Achieving a relative density above 84 % for samples sintered by the one-step sintering process was challenging. Conversely, two-step sintering significantly improved the relative density of KNNS-BNKZ ceramics up to 96 %, attributed to the control of AG nucleation in the first step and grain growth rate control in the second step. The quantity of AG nucleation was affected by the duration of the first step, determining the final microstructure. Despite having a lower T phase fraction than that of the one-step 1,100 ℃ specimen, the two-step specimen exhibited higher piezoelectric coefficients (d₃₃ = 574 pC/N and k_p = 0.5) than those of the one-step 1,100 ℃ specimen due to its higher relative density. Performance evaluation of magnetoelectric composite devices composed of one-step and two-step specimens showed that despite having a higher g₃₃, the magnetoelectric composite with the one-step 1,100 ℃ specimen exhibited the lowest magnetoelectric voltage coefficient, due to its lowest k_p. This study highlights the essential role of phase fraction and relative density in enhancing the performance of piezoelectric materials and devices, showcasing the effectiveness of the two-step sintering process for controlling the microstructure of ceramic materials containing volatile elements.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.90-94
• /
• 2016

In this work, [$Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_x(Zr_{0.5}Ti_{0.5})_{0.97-x}O_3-BiFeO_3$] (x=0.02 to 0.12) composition ceramics were fabricated by the conventional soild state reaction method and their microstructure and piezoelectric properties were investigated according to PNN substitution. The addition of small amount of $BiFeO_3$, $Li_2CO_3$, and $CaCO_3$ were used in order to decrease the sintering temperature of the ceramics. The XRD (x-ray diffraction patterns) of all ceramics exhibited a perovskite structure. The sinterability of PMW-PNN-PZT-BF ceramics was remarkably improved using liquid phase sintering of $CaCO_3$, $Li_2CO_3$. However, it was identified from of the X-ray diffraction patterns that the secondary phase formed in grain boundaries decreased the piezoelectric properties. According to the substitution of PNN, the crystal structure of ceramics is transformed gradually from a tetragonal to rhombohedral phase. The x=0.10 mol PNN-substituted PMW-PNN-PZT-BF ceramics sintered at $920^{\circ}C$ showed the optimum values of piezoelectric constant($d_{33}$), piezoelectric figure of merit($d_{33{\cdot}}g_{33}$), planar piezoelectric coupling coefficient($k_p$) and density : $d_{33}=566$ [pC/N], $g_{33}=29.28[10^{-3}mV/N]$, $d_{33{\cdot}}g_{33}=16.57[pm^2/N]$, $k_p=0.61$, density=7.82 [$g/cm^3$], suitable for duplex ultrasonic sensor application.