• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.22-27
• /
• 2005

We have studied the standardization of critical temperature measurements by using an ac susceptometer. Wire forms of NbTi, $Nb_{3}Sn$, and Bi-2223 superconductors were prepared to measure the temperature dependences of the magnetization. In order to study the optimum ac magnetic field and frequency, various amplitudes from 2 Oe to 10 Oe with frequencies from 11.3 Hz to 1033 Hz were applied to three specimens. Analytical comparison of the magnetic curves with the resistive curves was accomplished to investigate validity of using the new method.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.139-140
• /
• 2015

Zn/HA coating on the Ti-xNb alloys after nanotube formation for dental lmplant was researched using various experimental methods. Due to g ood biocompatibility and osteoconductivity, hydroxyapatite (HA) coating s on metallic biomedical implants were widely employed in orthopedic and dental applications. To improve biocompatibilities, Zinc (Zn) plays very important roles in the bone formation and immune reg ulations. The nanotube formed Zn-HA films were characterized with X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS).

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1400-1401
• /
• 2006

In this study, in order to develop low temperature sintering piezoelectric ceramics for multilayer piezoelectric actuator, $PbSr(Mn_{1/3}Nb_{2/3})O_3-(Mg_{1/3}Nb_{2/3})O_3-(ZrTi)O_3$ ceramics were fabricated using $Na_{2}CO_{3}-Li_{2}CO_{3}$ as sintering aids and their piezoelectric and dielectric characteristics were investigated according to the sintering tempo rature. At the sintering temperature of $900^{\circ}C$, the density, electrom echanical coupling factor(kp), mechanical quality factor(Qm) and dielectric constant(${\varepsilon}r$) of specimen showed the optimum value of $7.730[g/cm^2]$, 0.552, 1134, 1492 and 330[pC/N], respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.325-326
• /
• 2006

In this study, in order to develop piezoelectric device for multilayer piezoelectric ultrasonic motor, low temperature sintering $Pb(Mn_{1/3}Nb_{2/3})_{0.02}(Ni_{1/3}Nb_{2/3})_{0.12}(Zr_{0.48}Ti_{0.52})_{0.86}O_3$ system ceramics were fabricated according to the variations of forming pressure of casting sheet. At the 300[$kgf/cm^2$] forming pressure, the maximum density of 7.8[$g/cm^3$] was obtained. At the 350[$kgf/cm^2$] forming pressure, the maximum values of effective electromechanical coupling factor $k_{cff}\;=\;0.24$ and mechanical quality factor Qm=628 were obtained.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.2
• /
• pp.153-155
• /
• 2001

Eight new three-way cross heterozygotic hybrid genotypes of the mulberry silkworm Bombyx mori, resulted from hybridization of multivoltine as female and bivoltine Fl hybrid as male component, have been evaluated for the cumulative effect of nine traits of commercial economic importance with the objective of selecting out the most prospective ones for their exploitation as an intermediate technology during unfavorable season. Five of them namely, G(P5${\times}$NBl8) (E.I. =57.23); S(NB18${\times}$P5) (E.I. : 55.48); S(P5${\times}$NBl8) (E.I. = 52.44); S(KBN${\times}$B7) (E.I. = 50.42) and S(NB7${\times}$KB) (E.I. : 50.16) have scored higher values of the Evaluation Index (E.I.) and could be selected in the same order for exploitation during unfavorable seasons in tropical climates.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.249-254
• /
• 2004

Dietary supplementation of sodium nitrate with different concentrations 50, 100, 200, 500, 700 and 1000 $\mu\textrm{g}$/ml of single, two, three and four feeds to fifth instar larvae of biovoltine NB$_4$D$_2$ race of the silkworm, B. mori resulted in significant increase in the food conversion, conversion rate and conversion efficiency $K_1$ and $K_2$. However, there were significant decrease in the food assimilation, assimilation rate and assimilation efficiency in the sodium nitrate treated groups as compared with that of the corresponding parameters of the carrier control. This indicates that the administration of sodium nitrate may stimulate metabolic activities, thereby influencing conversion of food into body weight in the bivoltine silkworm, B. mori.

• Journal of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.85-93
• /
• 1988

Solvolyses of t-butylhalides (X = Cl, Br, I) in quasi isodielectric solvent system, MeOH-nitromethane, MeOH-nitrobenzene and MeOH-ethyleneglycol have been studied kinetically. Methanolyses for t-butylhalides in MeOH-NM and MeOH-NB show rate maxima at 40~100 % (v/v) MeOH. The rate maxima observed have been interpreted as a result of cooperative enhancement of polarity-polarizability and hydrogen bonddonor ability of solvents. The influences of polarity-polarizability and hydrogen bonddonor ability on reactivities of substrates have been discussed in terms of Y value changes. The solvolysis rates for t-butylhalides in E.G. are more than 20 fold faster than those in MeOH and this was attributed to the solvent structure of E.G.

• Korean Journal of Food Science and Technology
• /
• v.45 no.2
• /
• pp.142-147
• /
• 2013

This study was conducted to evaluate and compare new beer (NB) with market beers, e.g., New castle brown ale (NC), Victoria bitter (VB), and Coopers pale ale (CP) using physicochemical parameters. In addition, pattern recognition analyses were carried out using an electronic nose based on mass spectrometry (MS-E nose) and an electronic tongue (E-tongue) for differentiation of the different types of beer. The measured alcohol content of NB was 4.37%. NB was not significantly different compared with other types of beer with regard to bitterness unit, color, and polyphenol content (p<0.05). On the basis of the flavor pattern determined by the MS-E nose, NB was separated by DF1 (first score from discriminant function analysis), while NC, VB, and CP were located in the same group. The result of the E-tongue showed that the different samples could be clearly discriminated; NB was less sour. It was suggested that the discriminant function analysis (DFA) given by the MS-E nose and E-tongue could be used for evaluations during new product development. Furthermore, because of its simplicity, it might be possible to use the validated method for the evaluation of beer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.2
• /
• pp.162-170
• /
• 1998

The dose response effects of different levels of wheat barn (WB) supplementation to a rice straw based diet has been studied in growing native (Bos indicus) bulls of Bangladesh. Twelve bulls of $266{\pm}29.6kg$ live weight and $32{\pm}9.5$ months old were given either of three diets of ad libitum untreated rice straw alone (T1) or straw supplemented with 2 (T2) or 3 (T3) kg WB. Besides, the experimental animals also received a mineral mixture. In 4 weeks, data were recorded on the intake, digestibility, microbial N (MN) yield, N balance (NB) and growth rate (GR). In the three diets, WB was 0 (T1), 29.6 (T2) and 42 (T3) percent of the total DM intake. With the increasing levels of WB supplementation, the total DM and OM intake increased, but the straw intake decreased linearly. WB supplementation increased the digestibilities of DM, OM and N but had no effect on ADF digestibility. The urinary purine derivative excretion and hence the MN yield increased with WB supplementation. The total MN yield were 7.26 and 35 g/d respectively for 0.2 and 3 kg WB supplementation. However, the efficiency of MN yield was highest (13 g/kg DOMR) at 2 kg WB level. Despite the increase DOM intake, the dietary ME content remain below 6 MJ/kg DM even at 3 kg WB supplementation. The NB were -84,467 and 1,620 mg/kg $W^{0.75}/d$ which were reflected on the GR of -186,346 and 554 g/d for 0, 2 and 3 kg WB supplementation respectively. Depending on the cost effectiveness, on an untreated rice straw diet, WB may be supplemented by up to 3 kg/d (42% of the diet) or more. However, if the maximum utilization of roughage is the main concern, the optimum WB level would probably be around 2 kg (30% of the diet) daily.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.3
• /
• pp.185-197
• /
• 2023

The Gubong Au-Ag deposit consists of eight lens-shaped quartz veins. These veins have filled fractures along fault zones within Precambrian metasedimentary rock. This has been one of the largest deposits in Korea, and is geologically a mix of orogenic-type and intrusion-related types. Korea Mining Promotion Corporation drilled into a quartz vein (referred to as the No. 6 vein) with a width of 0.9 m and a grade of 27.9 g/t Au at a depth of -728 ML by drilling (No. 90-12) in the southern site of the deposit, To further investigate the potential redevelopment of the No. 6 vein, another drilling (No. 04-1) was carried out in 2004. In 2004, samples (wallrock, wallrock alteration and quartz vein) were collected from the No. 04-1 drilling core site to study the occurrence and chemical composition of Ti-bearing minerals (ilmenite, rutile). Rutile from mineralized zone at a depth of -275 ML occur minerals including K-feldspar, biotite, quartz, calcite, chlorite, pyrite in wallrock alteration zone. Ilmenite and rutile from ore vein (No. 6 vein) at a depth of -779 ML occur minerals including white mica, chlorite, apatite, zircon, quartz, calcite, pyrrhotite, pyrite in wallrock alteration zone and quartz vein. Based on mineral assemblage, rutile was formed by hydrothermal alteration (chloritization) of Ti-rich biotite in the wallrock. Chemical composition of ilmenite has maximum values of 0.09 wt.% (HfO₂), 0.39 wt.% (V₂O₃) and 0.54 wt.% (BaO). Comparing the chemical composition of rutile at a depth -275 ML and -779 ML, Rutile at a depth of -779 ML is higher contents (WO₃, FeO and BaO) than rutile at a depth of -275 ML. The substitutions of rutile at a depth of -275 ML and -779 ML are as followed : rutile at a depth of -275 ML Ba²⁺ + Al³⁺ + Hf⁴⁺ + (Nb⁵⁺, Ta⁵⁺) ↔ 3Ti⁴⁺ + Fe²⁺, 2V⁴⁺ + (W⁵⁺, Ta⁵⁺, Nb⁵⁺) ↔ 2Ti⁴⁺ + Al³⁺ + (Fe²⁺, Ba²⁺), Al³⁺ + V⁴⁺+ (Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + 2Fe²⁺, rutile at a depth of -779 ML 2 (Fe²⁺, Ba²⁺) + Al³⁺ + (W⁵⁺, Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + (V⁴⁺, Hf⁴⁺), Fe²⁺ + Al³⁺ + Hf ⁴⁺ + (W⁵⁺, Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + V⁴⁺ + Ba²⁺, respectively. Based on these data and chemical composition of rutiles from orogenic-type deposits, rutiles from Gubong deposit was formed in a relatively oxidizing environment than the rutile from orogenictype deposits (Unsan deposit, Kori Kollo deposit, Big Bell deposit, Meguma gold-bearing quartz vein).