• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.3
• /
• pp.34-40
• /
• 2009

For the preparation of carbon-slurry fuel, the effects of process parameters on the carbon dispersion stability in the liquid fuel have been investigated. The dispersion stability of carbon-slurry fuels could be monitored by measurements of particle size and carbon contents in the different positions, and observation of dispersion states after centrifuging. Through the application of various additives, it was found that NB463S84 based on polyolefin succinimde showed the best dispersion and longest stability life of carbon-slurry fuel. Also, PIBSI (polyisobutenyl succimide) with the similar functional groups to NB463S84 was effectively synthesized and same dispersion stability was verified by application to carbon-slurry fuel. Finally, the possibility of practical use of carbon-slurry fuels was confirmed by application of the mixing conditions obtained from g scale to kg scale preparation.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.1
• /
• pp.31-35
• /
• 2001

Ten newly evolved bivoltine hybrids of silkworm (Bombyx mori L) were evaluated with control hybrid KA${\pm}$NB4D2 during three seasons of a year for their seasonal performance. Analysis of variance and other statistical methods were employed and the performance was observed in respect of 10 quantitative traits. The results showed significant genotype${\pm}$environment interaction with respect to four quantitative characters viz. fecundity, yield/10,000 larvae, filament length and raw silk (%). Environmental effects were significant for nine characters out of ten characters evaluated. A 105${\pm}$J2 and B${\pm}$NB4D2 were considered as highly adaptable hybrids to local conditions with high mean for maximum characters studied and found suitable to rear in all seasons.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.153-160
• /
• 2000

We investigated the cytotoxic effects of roots and seeds Daucus carota L. on HepG2, HeLa, MCF7, SW626, C6 and NB41A3 cell lines by the MTT assay. Among extracts, the ethylacetate partition layer (DCMEA) of root of Daucus carota L. showed the strongest cytotoxic effects on HepG2, HeLa, C6 and NB41A3 cell lines. On the other hand, methanol(DCM), n-ethylacetate(DCMEA) and n-butanol(DCMB) extract of the seeds of Daucus carota L. also showed significant cytotoxic activities for all six cell lines. $\beta$-carotene, a well-known main component of Daucus carota L. was also tested for its cytotoxic effect. However, in all six cell lines, $\beta$-carotene falied to show significant cytotoxicity. Therefore, the anticancer effect of DCMEA of root fo Daucus carota L. and DCM, DCMH, DCMEA and DCMB extracts of seeds may be caused by components other than $\beta$-carotene. Futher studies are under way to isolate the compounds responsible for the significant cytotoxic activity.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3407-3412
• /
• 2012

The Ti incorporation at Fe-site in the double perovskite lattice of $Sr_2FeNbO_6$ (SFNO) system is studied. The Ti concentration optimization yielded an efficient photocatalyst. At an optimum composition of Ti as x = 0.07 in $Sr_2Fe_{1-x}Ti_xNbO_6$, the photocatalyst exhibited 2 times the quantum yield for photolysis of $H_2O$ in presence of $CH_3OH$, than its undoped counterpart under visible light (${\lambda}{\geq}420nm$). Heavily Ti-doped $Sr_2Fe_{1-x}Ti_xNbO_6$ lattice exhibited poor photochemical properties due to the existence of constituent impurity phases as observed in the structural characterization, as well as deteriorated optical absorption. The higher electron-density acquired by n-type doping seem to be responsible for the more efficient charge separation in $Sr_2Fe_{1-x}Ti_xNbO_6$ (0.05 < x < 0.4) and thus consequently displays higher photocatalytic activity. The Ti incorporated structure also found to yield stable photocatalyst.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.485-492
• /
• 2000

The sintering characteristics and the effects of density on dielectric properties in 0.2Ba(Mg$_{1}$3(Nb$_{2}$3/)O$_3$-0.8Ba(Mg$_{1}$3//Ta$_{2}$3/)O$_3$ceramics were investigated. The samples were made by the powder mixing techniques with the two step calcining conditions. When the 1st and the 2nd calcining temperatures were 120$0^{\circ}C$ and the sintering temperature was 155$0^{\circ}C$the density of samples showed the highest value (7.45 g/cm$^3$, 98.5% of theoretical density) among them. The dielectric constant of samples was nearly independent of density but the tan $\delta$ and the temperature coefficient of dielectric constant decreased linearly with increasing of the density. The quality factor(Q$\times$f), the temperature coefficient of resonance frequency and the dielectric constant of Ba[Mg$_{1}$3(Nb$_{0.2}$/Ta$_{0.8}$)sub 2/3/]O$_3$ceramic were 79,548 GHz, +1.5 ppm/$^{\circ}C$ and 26 in the microwave range, respectively.ely.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.478-484
• /
• 2000

The structural changes and the microwave dielectric properties of $Ba_{1-x}$/A$_{x}$/(Mg$_{1}$3//Nb$_{2}$3/)O$_3$(A=Sr, Ca=x0, 0.2, 0.4, 0.6, 0.8, 1.0) were investigated. The densities of samples are gradually decreased with increasing x(BMN=6.1, SMN=5.22 and CMN=4.26 g/m$^3$)The crystal structure of BMN was untilting of oxygen octahedral. The structural changes of BSMN showed the antiphase tilting at x>0.4, and those of BCMN showed the antiphase tilting at 0.20.8. The variation of dielectric constant with Sr was small(BMN=32, SMN=30) However the variation with Ca was large the highest value was 42 at Ca=0.2(CMN=25) The maximum quality factor was 68,000 GHz at Sr=0.2 and the minimum quality factor was 3,000 GHz at Ca=0.2 (BMN=35,000, SMN=20,000 and CMN=23,000 GHz) The temperature coefficients of resonant frequency of BSMN were about 2 times larger than those of BCMN in all composition.ion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.1
• /
• pp.35-39
• /
• 2006

In this study, in order to develop the multilayer piezoelectric actuator and ultrasonic resonator, PMN-PNN-PZT ceramics were fabricated by sintering with $Li_2CO_3-Na_2CO_3$ as sintering aids at $950^{\circ}C$ and their piezoelectric and dielectric characteristics were investigated as a function of PNN substitution. With increasing PNN substitution, dielectric constant(${\epsilon}_r$), electromechanical coupling factor(kp), and piezoelectric d constant($d_{33}$) were increased to $12 mol\%$ PNN substitution and then showed a tendency to decrease rapidly With increasing PNN substitution, crystal structure changed from tetragonal to rhombohedral at $12 mol\%$ PNN substitution and then secondary phase was appeared and its intensity was increased. At the $12 mol\%$ PNN substituted PMN-PZT composition ceramic sintered at $950^{\circ}C$, density, kp, $d_{33}$ and Qm showed the optimum value of $7.79 g/cm^3$, 0.599, 419 pC/N, and 894, respectively for multilayer piezoelectric actuator application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.7
• /
• pp.506-510
• /
• 2012

In this study, lead-free $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ ceramics were fabricated by conventional mixed oxide method. Structural and electrical properties of lead-free $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ ceramics with the variation of sintering temperature were investigated. As results of x-ray diffraction analysis, all specimens showed a typical polycrystalline perovskite structure without presence of the second phase. Sintered density increased with an increases of sintering temperature and the specimen sintered at $1,020^{\circ}C$ showed the maximum value of 4.5 $g/cm^3$. The average grain size of the $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ specimen sintered at $1,020^{\circ}C$ is about 0.83 ${\mu}m$. Electromechanical coupling factor, relative dielectric constant and dielectric loss of $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ specimens sintered at $1,020^{\circ}C$ were 0.252, 741 and 0.043% respectively.

• Korean Journal of Microbiology
• /
• v.37 no.2
• /
• pp.114-119
• /
• 2001

Many isolates from different forest soil layers did not show appreciable growth on full strength of the conventional nutrient broth (NB medium) but grow on its 100-fold dilution (DNB medium). These isolates were divided into four types according to organic nutrient concentration in the growth medium from $1^{-1}\;to\;10^{-4}$dilution of normal NB medium. Oligotrophic bacteria were type II and type IV which grew in $10^{-4}$ dilution of NB (1 mg C/l) medium. Sixty strains were isolated for obligate oligotrophic bacteria. Chemotaxonomic and phylogenetic characteristics of eleven isolates of acetylene-reducing (nitrogen-fixing) oligotrophic bacteria from forest soil were investigated. They showed similar characteristics: the cellular fatty acid mainly consisted of straight-chain unsaturated $C_{18:1}$ (60-84% of total fatty acids). Ubiquinone Q-10 and a high guanine plus-cytosine content(61-64 mol%) were found. Eleven isolates of nitrogen-fixing oligotrophic bacteria were found to be closely related by full 16S rDNA sequence simility and many common taxonomic traits. Analysis of full 16S rDNA sequences of eleven isolates indicated that they were more closely related to Bradyrhizobium (similarity values: 98.1-98.8%), Agromonas, Nitrobacter, and Afipia.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.6
• /
• pp.489-494
• /
• 2009

In this study, In order to improve dielectric and piezoelectric properties of Lead-free piezoelectric ceramics, $0.95(K_{0.5}Na_{0.5})NbO_3-0.05Li(Sb_{0.8}Nb_{0.2})O_3+0.2\;wt%Ag_2O+0.4\;wt%MnO_2+Xwt%CuO$ were investigated as a function of the amount of CuO addition. With increasing the amount of CuO addition, density was increased up to 0.4 wt.% CuO and then decreased above. And also, electro mechanical coupling factor ($k_p$) was decreased. At the 0.4 wt% CuO added specimen sintered at $1020^{\circ}C$, $k_p$, Qm, density, dielectric constant (${\varepsilon}_r$) and $d_{33}$[pC/N] showed the optimal value of $4.37\;g/cm^3$, 0.354, 305, 645, and 144 pC/N respectively.