• 한국전문물리치료학회지
• /
• 제4권1호
• /
• pp.11-19
• /
• 1997

The use of therapeutic ultrasound(US) in humans with malignant neoplasms has been contraindicated in physical therapy practice. Some studies have shown that results after application of US differ according to tumor type and penetration depth. The purposes of this study were to determine the effects of US on melanoma in mice and to determine treatment dosage. Twenty-four female C57BL/6 mice, age 8 weeks. The right flank of all mice was shaved, and a 0.1 ml suspension of cells was injected subcutaneously into the animals' right flank. In this study, 24 subjects were randomly divided into three groups: experimental group 1(n=8), experimental group 2(n=8), control group(n=8). In the experimental group 1, animals received continuous 3 MHZ US treatment, administered at $2.0W/cm^2$ for five minutes. In experimental group 2, animals received continuous 3 MHz US treatment, administered at $1.0W/cm^2$ for 5 minutes. The control group received the same handling as other experimental groups, including rodent chow, water, US gel application but US head pressure without the power turned on. After 10 days treatment, all mice were killed with a potassium solution. Tumors were excised and weighed on an electrical balance and fixed in a 10% neutral buffered formalin solution. Tumor weights were smaller in experimental group 2(0.3838 g) than in the control group(0.6275 g). Tumor weights of the experimental group 1(0.015 g) were smaller than those of experimental group 2. Continuous therapeutic US decreased the weight of subcutaneous melanoma tumors in mice. The treatment dosage($2.0W/cm^2$) we suggest was more effective than earlier studies on decreasing tumor size with ultrasound.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권5호
• /
• pp.642-647
• /
• 2012

Eight continuous culture fermenters were used in a completely randomized design to evaluate various nutritional values of Kochia (Kochia scoparia) compared with Atriplex (Atriplex dimorphostegia). Dried and pelleted samples (leaves and stems) provided substrate for metabolism by ruminal microbes maintained in a continuous culture fermentation system. Results indicated that there were no differences (p>0.05) in dry matter (DM) and crude protein (CP) digestibility between the two halophytic plants. Atriplex had higher (p<0.05) organic matter (OM) digestibility compared with Kochia. Neutral detergent fiber (aNDF) digestibility of Atriplex (411 g/kg) was higher (p<0.05) than that of Kochia (348 g/kg), however acid detergent fiber (ADF) digestibility was higher (p<0.05) in Kochia compared with Atriplex (406 vs. 234 g/kg). There were no differences (p>0.05) between the two halophytic plants in molar proportion of acetate and propionate, but the concentration of butyrate and valerate in Kochia were about two fold of Atriplex (p<0.05). When Kochia provided substrate to the microbes, protein synthesis was higher (p<0.05) compared with feeding Atriplex (5.96 vs. 4.85 g N/kg of OM truly digested). It was concluded that Kochia scoparia and Atriplex dimorphostegia had similar digestibility of DM and CP. It appears that these halophytic plants may not have enough digestible energy for high producing ruminants.

• Journal of Ship and Ocean Technology
• /
• 제10권2호
• /
• pp.24-36
• /
• 2006

Ship hullform is usually designed with a curve network, and smooth hullform surfaces are supposed to be generated by filling in (or interpolating) the curve network with appropriate surface patches. Tensor-product surfaces such as B-spline and $B\'{e}zier$ patches are typical representations to this interpolating problem. However, they have difficulties in representing the surfaces of irregular topological type which are frequently appeared in the fore- and after-body of ship hullform curve network. In this paper, we proposed a method that can automatically generate discrete $G^1$ continuous B-spline surfaces interpolating given curve network of ship hullform. This method consists of three steps. In the first step, given curve network is reorganized to be of two types: boundary curves and reference curves of surface patches. Especially, the boundary curves are specified for their surface patches to be rectangular or triangular topological type that can be represented with tensor-product (or degenerate) B-spline surface patches. In the second step, surface fitting points and cross boundary derivatives are estimated by constructing virtual iso-parametric curves at discrete parameters. In the last step, discrete $G^1$ continuous B-spline surfaces are generated by surface fitting algorithm. Finally, several examples of resulting smooth hullform surfaces generated from the curve network data of actual ship hullform are included to demonstrate the quality of the proposed method.

• Journal of Microbiology and Biotechnology
• /
• 제9권6호
• /
• pp.716-721
• /
• 1999

It has been known that continuous cultivation of hairy root is difficult to maintain for a long period of time compared to the microbial and callus cultures. Chemostat cultivation was successfully carried out in order to economically produce a plant-based colorant, betacyanin, from red beet hairy root for more than 85 days in a 14-1 fermentor. The result from the chemostat cultivation was compared to those of the batch and fed-batch cultivations of red beet hairy roots. It was shown that hairy root reached its steady state within 50 days of the cultivation, and then maintained for about 25-30 days in a wide range of dilution rates. Total betacyanin production from the continuous process was also calculated to be 2.65g at 0.28(l/d) of dilution rate, compared to 0.196g from fed-batch cultivation. It was found that betacyanin production was a partially growth related process, yielding 0.376 mg/g-fresh wt. cell and $1.89{\times}10^{-5}$ mg/g-fresh wt. cell/d, with 0.92 of correlation factor in a partial growth-product model. It was also shown that the cell growth required was relatively large for maintenance amount of energy at a low dilution rate. The growth of hairy root was inhibited by high light intensity in following a photo-inhibition model. The growth parameters were estimated to be 0.3(l/d), $10.56kcal/\textrm{m}^2/h$,{\;}and{\;}35.81kcal/\textrm{m}^2/h$ for the maximum specific growth rate, half saturation light intensity, and inhibition light intensity, respectively.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제1권1호
• /
• pp.18-21
• /
• 1996

A continuous production of fructooligosaccharides from sucrose was investigated by fructosyltransferase immobilized on a high porous resin, Diaion HPA25. The optimum pH(5.5) and temperature(55$^{\circ}C$) of the enzyme for activity was unaltered by immobilization, and the immobilized enzyme became less sensitive to the pH change. The optimal operation conditions of the immobilized enzyme column for maximizing the productivity were as follows: 600g/L of sucrose feed concentration, flow rate of superficial space velocity 2.7h-1. When the enzyme column was run at 50$^{\circ}C$, about 8% loss of the initial activity of immobilized enzyme was observed after 30 days of continuous operation, during which high productivity of 1174g/L$.$h was achieved. The kinds of products obtained using the immobilized enzyme were almost the same as those using soluble enzymes or free cells.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.319-323
• /
• 2005

This study is concerned with development of efficient culture methods for lactic acid fermentation of Lactobacillus sp. RKY2. The cell-recycle repeated batch fermentation using cheese whey and corn steep liquor as raw materials was tried in order to further enhance the productivity of lactic acid. In addition, fermentation efficiencies could be considerably enhanced by cell-recycle continuous culture. Through the cell-recycle repeated batch fermentation, lactic acid productivity was maximized to 6.34 $g/L{\cdot}h,$ which corresponded to 6.2 times higher value than that of the batch fermentation. During the cell-recycle continuous fermentation, the last dry cell weight at the end of fermentation could be increased to 25.3 g/L.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.107-110
• /
• 1999

The purpose of this research is for the development of a new type forging equipment H.C.G(Hyundai Continuous Grain-flow) by using two virtual build-up tools rigid viscoplastic FEM and downsized plasticine experiment. This forging equipment consists of consecutive horizontal and vertical pressure while the traditional forging method consists of only vertical pressure. Using this method high quality crankshafts can be forged as it can maintain a continuous grain flow. The factors considered in the development of equipment are die geometry for flawless deformed shape die reaction forces stress/strain distributions and continuous material flow. We carried out several numerical simulations and downsized plasticine experiments for the proper design of the forging equipment. The validity of those simulation results is confirmed by checking with the actual test results. Based on these simulation results the proper design of the H.C.G for ging equipment is enabled.

• KSBB Journal
• /
• 제5권3호
• /
• pp.223-227
• /
• 1990

Ethanol을 주로 생산하는 균주인 Z. mobilis의 cell wall 투과성을 높인 후 고정화하여 sorbitol 생산에 이용 하였다. 그러나, toluene으로 투과성을 높은 cell은 oxidoreductase의 유출, 손실로 인하여 sorbitol conversion efficency가 급격히 저하되었다. 따라서, 이와같은 enzymcd의 유출을 방지 하기 위하여, 투과성을 향상시킨 cell을 0.25% glutaraldehyd로 처리한 후 alginate와 chitin에 고정화하여 회석율 $0.2h^{-1}$에서 연속배양을 한 결과 210시간동안 효소활성도의 저하는 거의 일어나지 않았다. 이와같은 연속배양에서 얻어진 sorbitol productivity는 3.5g / l-h로 측정 되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.624-627
• /
• 1988

This paper describes the implementation of recognition of speaker - dependent Korean spoken continuous digits. The recognition system can be divided into two parts, acoustic - phonetic processor and lexical decoder. Acoustic - phonetic processor calculates the feature vectors from input speech signal and the performs frame labelling and phone labelling. Frame labelling is performed by Bayesian classification method and phone labelling is performed using labelled frame and posteriori probability. The lexical decoder accepts segments (phones) from acoustic - phonetic processor and decodes its lexical structure through phone network which is constructed from phonetic representation of ten digits. The experiment carried out with two sets of 4continuous digits, each set is composed of 35 patterns. An evaluation of the system yielded a pattern accuracy of about 80 percent resulting from a word accuracy of about 95 percent.

• KSBB Journal
• /
• 제13권4호
• /
• pp.456-460
• /
• 1998

Fed-batch fermentations were carried out in order to improve the efficiency of hirudin production by recombinant Saccharomyces cerevisiae. A fed-batch fermentation done with the optimized semi-synthetic medium resulted in a maximum hirudin concentration of 342mg/$\ell$ by keeping a galactose concentrations between 10 and 30g/$\ell$ which corresponded to a 11.4-fold increase in hirudin concentration compared with the simple bach fermentation done with the same medium. Comparison of the chromatographic pattern of proteins in the growth medium clearly showed that the use of the semi-synthetic medium is more advantageous for separation of hirudin than the case o fusing the complex medium. Continuous cell recycle fermentation done at dilution rate of 0.1h-1 and an inlet galactose concentration of 100g/$\ell$ yielded a maximum hirudin productivity of 19.1mg hirudin/$\ell$$.$h.