• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.207-213
• /
• 1999

In this study, the possibility of estimation of friction coefficient between tire and road surface using running car data are checked. To get necessary data, such as tire and car velocities and braking force, a test car is driven with certain magnitude of decelerations from pre-set initial velocities to stop . The data are used to estimate friction coefficient with property chosen parameters , e.g,, driving stiffness, pressure distribution functions, etc. Experimental results show that running data car be used with properly chosen parameters to estimate friction coefficient.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1109-1114
• /
• 2003

The initial crack often occurs on the bonded interface and it is the general cause of the interface fracture. It is very significant to establish the measurement method of interfacial crack by applying the ultrasonic technology into the interface of bonded dissimilar materials. In this paper, the interfacial crack length was measured by ultrasonic attenuation coefficient in the Al/Epoxy bonded dissimilar materials of double-cantilever beam(DCB). The energy release rate, G, was obtained by the experimental and Ripling's equation measurement of compliance. The experimental results represent that the relation between interfacial crack length for the ultrasonic attenuation coefficient and energy release rate is increased proportionally. From the experimental results, a measurement method of the interfacial crack length by the ultrasonic attenuation coefficient was proposed and discussed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.39-53
• /
• 2018

Generally, the total ventilation resistance coefficient in a tunnel consists of inlet/outlet loss coefficient, wall friction coefficient, and other loss coefficient caused by sudden expansion and contraction of cross-section, etc. For the tunnel before opening, when the running ventilation fan is stopped, the wind speed in the tunnel is reduced by the total ventilation resistance drag. The velocity decay method is comparatively stable and easy to estimate the wall friction coefficient in the pre-opening tunnel. However, the existing study reported that when the converging wind speed is a negative value after the ventilation fan stops, it is difficult to estimate the wall friction coefficient according to the velocity decay method. On the other hand, for the operating tunnel in which the piston effect acts, a more complex process is performed; however, a reasonable wall friction coefficient can be estimated. This paper aims at suggesting a method to minimize the measurement variables of the piston effect and reviewing a method that can be applied to the operating tunnel. Also, in this study, a new method has been developed, which enables to calculate an variation of the piston effect if the piston effect is constant with a sudden change of external natural wind occurring while the wind speed in the tunnel decreases after the ventilation fan stops, and a programming logic has been also developed, which enables dynamic simulation analysis in order to estimate the wall friction coefficient in a tunnel.

• Journal of Animal Environmental Science
• /
• v.7 no.3
• /
• pp.177-182
• /
• 2001

This study was conducted to find out the coefficient relationships between intensity values image processing and pollution density of slurries. Slurry images were obtained from the image processing system using personnel computer and CCD-camera. Software, written in Visual $c^{++}$, combined the functions of the image capture, image processing and image analysis. The data of image processing for slurries were analyzed by the method of regression analysis. The results are as follows. 1. Red(R)-values among image processing data were obtained the highest correlation coefficient 0.9213 for detecting COD. Also, green(G)-value were obtained the highest correlation coefficient 0.9019 fur detecting BOD. Blue(B)-value could not find significant values to detect the pollution resources density. 2. Hue(H)-values among image processing data were obtained the highest correlation coefficient 0.9466 for detecting BOD. This fact could be used in detecting BOD 3. Green(G)-value, GRAY-value, Hue(H)-value, Saturation(5)-value and Intensity(I)-value were the correlation coefficient more than 0.8 for BOD. Hue(H)-value was higher correlation coefficient than any other value. It was possible to detect pollution density of slurries by using the image processing system. 4. Red(R)-value, GRAY-value and Saturation(5)-value were obtained the correlation coefficient more than 0.8 for detecting COD. a-value had the highest correlation coefficient Among these values. It was possible to detect density indirectly by using the image processing system. 5. SS-density were obtained the correlation coefficient less than 0.8 by using the image processing system. The density of $NH_4$-N and $NO_3$-N were obtained correlation coefficient less than 0.2.

• The Korean Journal of Malacology
• /
• v.23 no.1
• /
• pp.31-38
• /
• 2007

Population ecological parameters and stock biomass of the purplish washington clam, Saxidomus purpuratus (Sowerby), in the southern coastal areas of Korea were determined based on the fishery data from the Divers Fisheries Cooperative and other available biological data. Instantaneous coefficient of total mortality (Z) of purplish Washington clam was estimated to be 0.7479/year. The estimated instantaneous coefficient of natural mortality (M) was 0.2012/year. From the values of Z and M, the instantaneous coefficient of fishing mortality coefficient (F) for the recent years was calculated to be 0.4578/year. The age of purplish Washington clam at its first capture ($t_c$) was 2.7506 year. Yield-per-recruit and spawning biomass-per-recruit were estimated under harvest strategies that bases on $F_{max}$, $F_{0.1}$, $F_{35%}$ and $F_{40%}$ were shown as 81.60 g, 61.68 g, 115.07 g and 131.51 g, respectively. The acceptable biological catch (ABC) was estimated to be about 1,404 metric tons.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.391-392
• /
• 2013

• The Pure and Applied Mathematics
• /
• v.30 no.3
• /
• pp.337-345
• /
• 2023

Different versions of the boundary Schwarz lemma for the 𝒩 (𝜌) class are discussed in this study. Also, for the function g(z) = z+b₂z²+b₃z³+... defined in the unit disc D such that g ∈ 𝒩 (𝜌), we estimate a modulus of the angular derivative of g(z) function at the boundary point 1 ∈ 𝜕D with g'(1) = 1 + 𝜎 (1 - 𝜌), where ${\rho}={\frac{1}{n}}{\sum\limits_{i=1}^{n}}g(c_i)={\frac{g^{\prime}(c_1)+g^{\prime}(c_2)+{\ldots}+g^{\prime}(c_n)}{n}}{\in}g^{\prime}(D)$ and 𝜌≠1, 𝜎 > 1 and c₁, c₂, ..., c_n ∈ 𝜕D. That is, we shall give an estimate below |g"(1)| according to the first nonzero Taylor coefficient of about two zeros, namely z = 0 and z ≠ 0. Estimating is made by using the arithmetic average of n different derivatives g'(c₁), g'(c₂), ..., g'(c_n).

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.664-671
• /
• 2013

Determination of xanthan gum as watersoluble-polymer in commercial cosmetic samples was carried out by High Perfomance Liquid Chromatography(HPLC). An $C_{18}$ reversed-phase column and the selected ELSD detector was applied. The 25mM ammonium acetate/acetonitrile was used for the mobile phase of gradient conditions. The analysis results of HPLC showed good linearity with correlation coefficient of $r^2=0.9993$ in the rage of $50.3{\sim}604.1{\mu}g/ml$ and detection limit of $12.0{\mu}g/ml$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.4 s.23
• /
• pp.146-151
• /
• 2005

The burning rates of combustible cartridge cases(CCCs) of 120mm kinetic energy ammunition were measured by CBT(Closed Bomb Tester). The burning coefficient was 1.4 for CCC fabricated by Post Impregnation(PI) process, and 1.0 for that by Beater Additive(BA) process. The BA process CCC showed the fixed burning coefficient of 1.0 in spite of changing the composition of CCC. As the Korean Future Main Battle Tank is requiring the high penetration performance compared with that of KlAl tank ammunition(K276), CCC was designed to have higher impetus composition than that of K276 composition(525J/g). The optimum impetus was 600J/g when considering the increases of pressure and muzzle velocity with increasing impetus. When impetus of CCC by changing the composition increased from 525J/g to 600J/g, the muzzle velocity of 12m/s at pressure increase of 3500psi increased in case of using SCDB propellant.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.2
• /
• pp.157-163
• /
• 2000

An experimental study was conducted to evaluate the treatment efficiency of paper-mill wastewater using pure oxygen activated sludge process. Effects of hydraulic retention time (HRT) and organic loading on process performance and kinetics were investigated. The raw paper-mill wastewater(BOD concentration ${\leq}500mg/L$) and the effluent from dissolved air flotation(DAF) treatment(BOD concentration ${\geq}500mg/L$) were used as influent for pure oxygen activated sludge process. Average BOD removal efficiencies were above 89.3% under 6hours or longer of HRT, while under 3hours of HRT they decreased to about 82%. With the effluent from DAF process, the half saturation constants($K_S$) and the maximum specific substrate removal rate($K_{max}$) were 85 mg/L and 2.25 L/day, respectively. However, with the raw paper-mill wastewater, both $K_S$ and $K_{max}$ increased to 156 mg/L and 3.84 L/day, respectively. The microbial yield coefficient(Y) and the decay coefficient($K_d$) were 0.46 gVSS/gBOD and 0.03 L/day, respectively, with effluent from DAF process. While, Y and $K_d$ were 0.24 gVSS/gBOD and 0.035 L/day, respectively, with the raw paper-mill wastewater.