• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 추계학술대회 학술발표 논문집
• /
• pp.79-82
• /
• 1997

In this paper, group intelligence "arrangement" bahavior of autonomous mobile robots(AMRs) is realized by the fuzzy rules. The fuzzy rules for the arrangement are generated from clustering the input-output data. Simulation shows that a small-number of fuzzy rules successfully realizes the arrangement behavior of AMRs.

• 한국지능시스템학회논문지
• /
• 제19권4호
• /
• pp.464-469
• /
• 2009

본 논문은 네트워크 상에서 구현되는 불확실 Takagi-Sugeno (T-S) 퍼지 시스템의 관측기 기반 강인 안정화를 논의한다. 네트워크 기반 시스템에서 입력 지연은 필연적으로 발생하며 마코프 (Markov) 확률 과정으로 표현함을 가정한다. 강인 퍼지 관측기 기반 샘플치 제어기를 설계하기 위하여 입출력 단에 영차의 샘플/홀드를 가정하여 T-S 퍼지 시스템을 이산화하고 확률적 과정에 따라 변화하는 도약 시스템으로 표현한다. 확률적 강인 안정 가능성 조건은 선형 행렬 부등식으로 표현된다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1264-1272
• /
• 1993

The software for unmanned control of three row typed rice combine has been developed using fuzzy logic. Three fuzzy variables were used : operating status of combine, steering, and speed. Eleven fuzzy rules were constructed and the eleven linguistic variables were used for the fuzzy rules. Six sensors were use of to get input values and sensor input values were quantified into 11 levels. The fuzzy output was infered with fuzzy inferrence which uses the correlation product encoding , and it must have been defuzzified by the method of center of gravity to use it for the control. The result of performance test using graphic simulation showed that the intelligently unmanned control of a rice combine was possible using fuzzy logic control.

• 한국콘텐츠학회논문지
• /
• 제11권3호
• /
• pp.48-55
• /
• 2011

본 논문은 비선형 공정의 퍼지 모델을 동정하기 위해 전체 입력의 공간 분할 및 퍼지 추론 방법에 따른 퍼지 추론 시스템의 입출력 특성을 분석하며, 퍼지 모델의 입력 변수와 퍼지 입력 공간 분할 및 후반부 다항식 함수에 의한 구조 동정과 파라미터 동정을 통해 비선형 공정을 표현한다. 퍼지 규칙에서 전반부 파라미터의 동정에는 입출력 데이터의 최소 값과 최대 값을 이용하는 최소-최대 방법 및 입출력 데이터를 군집으로 형성하는 C-Means 클러스터링 알고리즘을 사용하여 입력 공간을 분할한다. 또한 전반부 멤버쉽 함수는 삼각형 멤버쉽 함수를 사용하여 입력 공간을 형성한다. 후반부 동정에서 퍼지 추론 방법은 간략 추론 및 선형 추론에 의해 시스템을 표현한다. 또한, 각 규칙의 후반부 파라미터들, 즉 후반부 다항식의 계수를 동정하기 위해 표준 최소자승법을 사용한다. 마지막으로, 비선형 공정으로는 널리 이용되는 가스로 데이터를 사용하며 이 공정에 대해 성능을 평가한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권2호
• /
• pp.90-96
• /
• 2005

This paper presents hardware scheme of fuzzy inference engine, based on α-level set decomposition of fuzzy sets for fuzzy control of DC servo system. We propose a method which is directly converted to PWM actuating signal by a one body of fuzzy inference and defuzzification. The influence of quantity α-levels on input/output characteristics of fuzzy controller and output response of DC servo system is investigated. It is concluded that quantity α-cut 4 give a sufficient result for fuzzy control performance of DC servo system. The experimental results shows that the proposed hardware method is effective for practical applications of DC servo system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.567-572
• /
• 1991

This paper proposes an algorithm of fuzzy model modification which improves fuzzy relation matrix for multi-input/single output dynamic systems. Zadeh's possibility distribution plays an important role in the proposed algorithm and in the use of fuzzy models which are constructed by the proposed algorithm. The required computer capacity and time for implementing the proposed algorithm and resulting models are significantly reduced by introducing the concept of the referential fuzzy sets. A nonlinear system is given to show that the proposed algorithm can provide the fuzzy model with satisfactory accuracy.

• 한국지능시스템학회논문지
• /
• 제7권5호
• /
• pp.21-27
• /
• 1997

Neuro-fuzzy network that combined advantages of the neural network in learning and fuzzy system in inferencing can be used to establish a system model in the design of a controller. In this paper, we presented the neuro-fuzzy system that can be able to generated a linguistic fuzzy model which results in a similar input/output response to the original system. The network was used to model a system. We tested the performance ot the neuro-fuzzy network through computer simulations.

• 전기학회논문지
• /
• 제64권6호
• /
• pp.912-921
• /
• 2015

In this paper, we introduce fuzzy inference-based real-time deterioration diagnosis system with the aid of infrared thermal imaging camera. In the proposed system, the infrared thermal imaging camera monitors diagnostic field in real time and then checks state of deterioration at the same time. Temperature and variation of temperature obtained from the infrared thermal imaging camera variation are used as input variables. In addition to perform more efficient diagnosis, fuzzy inference algorithm is applied to the proposed system, and fuzzy rule is defined by If-then form and is expressed as lookup-table. While triangular membership function is used to estimate fuzzy set of input variables, that of output variable has singleton membership function. At last, state of deterioration in the present is determined based on output obtained through defuzzification. Experimental data acquired from deterioration generator and electric machinery are used in order to evaluate performance of the proposed system. And simulator is realized in order to confirm real-time state of diagnostic field

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.965-967
• /
• 2003

Fuzzy Controller is a system that displays a person's thoughts using membership function and IF-THEN rules. With the help of specialists' knowledge, rule bases can be explained in easy language. Furthermore Fuzzy Controller has strong resistance against turbulence. Its performance is especially prominent when targets cannot be measured in mathematic methods because the fuzzy controller can measure the output using only the relations between the input and output. With the increasing influence of multimedia on our daily lives, vision plays bigger role both in industries and personal lives. Like wise vision is being used in many areas such as detecting and identifying objects. It is difficult to detect and control targets because there is a delay in the calculating when using vision in detecting and controlling objects in large quantity. In this paper we showed how to use fuzzy controller in minimizing the calculation process, controlling target objects and moving view window instead of applying input variation through vision. Ball beam, which has strong nonlinear, was used as the target object and DSP320C6711 IDK by TI(Texas Instruments) company was for the benefit of speedy calculation and vision data operation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.366-366
• /
• 2000

In this paper, an adaptive neuro-fuzzy filter using the conditional fuzzy c-means(CFCM) methods is proposed. Usualy, the number of fuzzy rules exponentially increases by applying the grid partitioning of the input space, in conventional adaptive neuro-fuzzy inference system(ANFIS) approaches. In order to solve this problem, CFCM method is adopted to render the clusters which represent the given input and output data. Parameter identification is performed by hybrid learning using back-propagation algorithm and total least square(TLS) method. Finally, we applied the proposed method to the nonlinear channel equalization problem and obtained a better performance than previous works.