• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.2
• /
• pp.205-210
• /
• 2004

This paper deals with rule extraction from data using rough set theory. We construct the rule base in a hierarchical granulation structure by applying core as a classification criteria at each level. When more than one core exist, the coverage is used for the selection of an appropriate one among them to increase the classification rate and accuracy. In Addition, a probabilistic approach is suggested so that the partially useful information included in inconsistent data can be contributed to knowledge reduction in order to decrease the effect of the uncertainty or vagueness of data. As a result, the proposed method yields more proper and efficient rule base in compatability and size. The simulation result shows that it gives a good performance in spite of very simple rules and short conditionals.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.293-297
• /
• 1996

For the representative beat calculation and efficient rhythm analysis new method, that is, QRS typification were proposed. A problem that were resulted from pattern classification based on binary logic could be solved out by the fuzzy clustering and classification nodes could be reduced by using the proposed new feature vector. The accurate representative beat could be obtained by excluding the ST-T segment that happened outlier through ST-T segment typification procedure.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1539-1544
• /
• 2005

The gauge control of the fishing mill is very important because more and more accurately sized hot rolled coils are demanded by customers recently. Because the mill constant and the plasticity coefficient vary with the specifications of the mill, the classification of steel, the strip width, the strip thickness and the slab temperature, the variation of these parameters should be considered in the automatic gauge control system(AGC). Generally, the AGC gain is used to minimize the effect of the uncertain parameters. In a practical field, operators set the AGC gain as a constant value calculated by FSU (Finishing-mill Set-Up model) and it is not changed during the operating time. In this paper, the thickness data signals that occupy different frequency bands are respectively extracted by adaptive filters and then the main cause of the thickness variation is analyzed. Additionally, the AGC gain is adaptively tuned to reduce this variation using the online tuning model. Especially ANFIS(Adaptive-Neuro-based Fuzzy Interface System) which unifies both fuzzy logics and neural networks, is used for this gain adjustment system because fuzzy logics use the professionals' experiences about the uncertainty and the nonlinearity of the system. Simulation is performed by using POSCO's data and the results show that proposed on-line gain adjustment algorithm has a good performance.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.190-200
• /
• 2001

This paper is addressed to welding defect feature vector selection and implementation method of welding defect classifier using fuzzy techniques. We compare IAV, zero-crossing number as time domain analysis, power spectrum coefficient as frequency domain, histogram as both domain for welding defect feature selection. We choose histogram as feature vector by graph analysis and find out that maximum frequent occurrence number and section of corresponding signal scale in relative histogram show obvious difference between normal welding and voiding with penetration depth defect. We implement a fuzzy welding defect classifier using these feature vector, test it to verify its effectiveness for 695 welding data frame which consist of 4000 sampled data. As result of test, correct classification rate is 92.96%. Lab experimental results show a effectiveness of fuzzy welding defect classifier using relative histogram for practical Laser welding monitoring system in industry.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1254-1257
• /
• 1993

Presented in this paper is a newly developed motion planning method of an autonomous mobile robot(MAR) which can be applied to flexible manufacturing systems(FMS). The mobile robot is designed for transporting tools and workpieces between a set-up station and machines according to production schedules of the whole FMS. The proposed method is implemented based on an earlier developed real-time obstacle avoidance method which employs Kohonen network for pattern classification of sonar readings and fuzzy logic for local path planning. Particulary, a novel obstacle avoidance method for moving objects using a collision index, collision possibility measure, is described. Our method has been tested on the SNU mobile robot. The experimental results show that the robot successfully navigates to its target while avoiding moving objects.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.1
• /
• pp.14-24
• /
• 2001

The huge and complicated plants such as nuclear power stations are likely to cause the operators to make mistakes due to a variety of inexplicable reasons and symptoms in case of emergency. Thats why the prevention system assisting the operators is being developed for. First of all. I suggest an improved fuzzy diagnosis. Secondly. I want to demonstrate that a classification system of nuclear plants accident investigating the causes of accidents foresees possible problems. and maintains the reliability of the diagnostic reports in spite of improper working in part. In the event of emergency in a nuclear plant, a lot of operational steps enable the operators to find out what caused the problems based on an emergent operating plan. Our system is able to classify their types within twenty to thirty seconds. As so, we expect the system to put don the accidents right after the rapid detection of the damage control-method concerned.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.4
• /
• pp.55-62
• /
• 2014

This paper proposes a fault detection method utilizing converted images of acoustic emission signals and texture analysis for identifying bearing's multi-faults which frequently occur in an induction motor. The proposed method analyzes three texture features from the converted images of multi-faults: multi-faults image's entropy, homogeneity, and energy. These extracted features are then used as inputs of a fuzzy-ARTMAP to identify each multi-fault including outer-inner, inner-roller, and outer-roller. The experimental results using ten times trials indicate that the proposed method achieves 100% accuracy in the fault classification.

• Korean Journal of Cognitive Science
• /
• v.6 no.2
• /
• pp.27-45
• /
• 1995

In this paper, we suggest the "Fuzzy Behavior Knowledge Space(FBKS)" and explain how to utilize the FBKS when aggregating decisions of individual classifiers. The concept of "Behavior Knowledge Space(BKS)" is known to be the best method in the context that each classifier offers only one class label as its decision. However. the BKS does not considers measurement value of class label. Furthermore, it does not allow the heuristic knowledge of human experts to be embedded when combining multiple decisions. The FBKS eliminates such drawbacks of the BKS by adapting the fwzy concepts. Our method applies to the classification results that contain both class labels and associated measurement values. Experimental results confirm that the FBKS could be a very promising tool in pattern recognition areas.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.3
• /
• pp.196-201
• /
• 2008

Statistical learning theory has three analytical tools which are support vector machine, support vector regression, and support vector clustering for classification, regression, and clustering respectively. In general, their performances are good because they are constructed by convex optimization. But, there are some problems in the methods. One of the problems is the subjective determination of the parameters for kernel function and regularization by the arts of researchers. Also, the results of the learning machines are depended on the selected parameters. In this paper, we propose an efficient method for objective determination of the parameters of support vector clustering which is the clustering method of statistical learning theory. Using evolutionary algorithm and bootstrap method, we select the parameters of kernel function and regularization constant objectively. To verify improved performances of proposed research, we compare our method with established learning algorithms using the data sets form ucr machine learning repository and synthetic data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1341-1347
• /
• 2020

Legacy studies for classifying arrhythmia have been studied in order to improve the accuracy of classification, Neural Network, Fuzzy, Machine Learning, etc. In particular, deep learning is most frequently used for arrhythmia classification using error backpropagation algorithm by solving the limit of hidden layer number, which is a problem of neural network. In order to apply a deep learning model to an ECG signal, it is necessary to select an optimal model and parameters. In this paper, we propose parameter extraction based on AR and arrhythmia classification through a deep learning. For this purpose, the R-wave is detected in the ECG signal from which noise has been removed, QRS and RR interval is modelled. And then, the weights were learned by supervised learning method through deep learning and the model was evaluated by the verification data. The classification rate of PVC is evaluated through MIT-BIH arrhythmia database. The achieved scores indicate arrhythmia classification rate of over 97%.