• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.391-402
• /
• 2021

Purpose: By categorizing opinions by subject in the safety certification ecosystem, we want to identify weaknesses in system operation and suggest improvement plans so that the safety certification system can have quick resilience against future variability. Method: Through literature research and data analysis, similar domestic and foreign safety certifications and related cases, as well as the current status of international standards and national standards, etc. were confirmed, and a fact-finding survey was conducted for each stakeholder in the safety certification ecosystem, and problem types and improvement measures were established. Result: We conduct a fact-finding survey of the overall system, such as quality satisfaction with safety certification target products, obstacles in the development, manufacturing and use process, and safety certification-related improvements, targeting workplaces that manufacture, import or use safety certification target machines By discovering and categorizing problems and weaknesses in system operation, detailed implementation tasks were derived to establish improvement directions and improve operability. Conclusion: For the advancement and internationalization of the safety certification system, it is necessary to efficiently carry out the detailed promotion tasks derived from this study. In addition, in order to strengthen the resilience to the variability of the safety certification ecosystem, the operating system of a virtuous cycle structure by improving the mutual relationship between each subject construction is considered important.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.125-130
• /
• 2019

This research is about alternative measure of main components for sprinkler system like automatic wet pipe sprinkler system, dry pipe sprinkler system, pre-action sprinkler system, vacuum sprinkler system, deluge sprinkler system, and so on. By replacing the alarm check valve, dry valve, pre-operated valve, and deluge open valve with a solenoid valve, it be can be simplifed the various processes of the manufacturing process into one process, it creates an environment in which one standardized product can be produced simultaneously on a single machine. Therefore, it could improve the price competitiveness of products, reduce the maintenance cost, and help the adaptability of new sprinkler systems in the future. There is a benefit when it comes to apply to sprinkler system. Only replace the valve which is used to control primary and secondary valve such as wet, dry, pre operated, vacuum, deluge system valve. Other components such as retarding chambers, automatic air compressors, accelerators or adjusters, supervisory panels, vacuum pumps, and manual starters can be used as they are, so they can be easily applied to existing sprinkler system. It is needed to legal and institutional study for solenoid valve applied sprinkler system to commercialize.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.763-769
• /
• 2018

In this research, in order to improve the heat retention of greenhouse, comparative analysis of the heat flux of the marketed multi-later insulating curtain was carried out. Experiments is conducted by fabricating a test apparatus for investigating the heat flux characteristics. The multi-later insulating curtain used for the experiment was compared using the P, N, S, U and T company, which are commercially available, and the heat flux due to temperature difference between the experimental apparatus and the outside was compared and analyzed. When the internal temperature of the experimental result is the maximum temperature $60^{\circ}C$, the heat flux of multi-later insulating curtain is T Co.($73.1W/m^2$) > S Co.($119.5W/m^2$) > U Co.($155W/m^2$) > N Co.($163.1W/m^2$) > P Co.($177.7W/m^2$). The heat flux means the quantity of heat passing through the unit time per unit area, and the higher the numerical value, the higher the quantity of heat passing through the multi-layer insulating curtain. This can be determined that high heat fluxes produce low heat resistance. Further, it has been found that the weight of the insulating curtain is largely unrelated to the heat insulating property, and the heat insulating curtain having a thickness containing a high internal air layer is excellent in the heat insulating property. In the future when manufacturing a heat insulating curtain, It is judged that it is desirable to manufacture a combination of heat insulating materials that contain a high internal air layer content and that can maintain the air layer even for long-term use while minimizing the volume.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.21-35
• /
• 2020

Due to the coronavirus pandemic and diplomatic disputes, governments are actively developing a policy to revitalize·reshore manufacturing and to diversify international cooperations. In order to develop such a policy, it is very important to compare and analyze domestic·international geospatial information. Over the decade, the US·EC governments have conducted a series of national researches to build data-based tools that can monitor·analyze regional geospatial information driven by government R&D investments. In the case of the EC system, it can compare geospatial information in domestic and international(including Korea) regions. Compared to US·EC cases, Korean examples of national researches with available data analplatform need future improvements. Current study is investigating an automated analysis methodologies using "National Institute of Science and Technology Information (NTIS)" DB, which was national security data until recently. Research on data-mining regional geospatial information can contribute to support policy fields that need to discover new issues in response to unexpected social problems such as recently faced corona and trade disputes.

• Resources Recycling
• /
• v.30 no.3
• /
• pp.3-17
• /
• 2021

Currently, there is a drain of natural resources, environmental contamination, generation of waste, and problems of the earth's climate by CO₂ emissions according to mass production and overconsumption of mankind. It is effectuated by a linear economy that involves manufacturing products, use, and waste repeatedly; there is no guarantee in the lives of humans and the future of the globe if we do not find alternative proposals. For a sustainable developing society and to overcome the present global problems, we must successively change to a circular economy from a linear economy. The circular economy has the concept of an extended value chain in recovery, reuse, remanufacturing, and recycling, instead of discarding after the use of manufactured goods. New business models of circular economy have been realized to save the earth ecology and sustainable developing society in serious recognition of the linear economy system. New business models are established by creating a vision and developing a program, and by renovating technology, law, and financial support through a worldwide government policy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.434-439
• /
• 2020

Selective laser melting (SLM) manufactures an alloy using laser as a heat source, and has recently been introduced in the dental industry. However, there is a lack of analytical research on metal-ceramic restorations achieved by SLM. This study evaluates and compares the metal-ceramic bond strength of Co-Cr alloys produced by selective laser melting and casting methods. Co-Cr samples required for this study were produced through the sintering process of ceramics, by applying the SLM and CAST methods. The metal-ceramic bond strength was measured by applying the shear bond strength test. In order to determine the area fraction of adherent ceramic, Si content of the specimen was measured using scanning electron microscopy SEM/ EDS. Results of the metal-ceramic bond strength and AFAC were analyzed by t-test (α = 0.05). No significant difference was observed comparing the bond strength of SLM and CAST Co-Cr alloys (P> 0.05). However, the SLM group had much better ceramic adherence than the CAST group (P < 0.001). Moreover, oxidation characteristics were similar for both SLM and CAST Co-Cr alloys, but metal structures were different. These results imply that although the bond of ceramic and Co-Cr alloy is not related to the manufacturing method, SLM alloys impart better ceramic adherence. This indicates that alloys made with SLM can be used to fabricate upper implant prostheses in the future. In particular, it is expected to overcome the shortcomings of the CAST method, and save time and cost.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.258-269
• /
• 2021

This research examines the effects of family-friendly organizational climate(FFOC) on innovative behavior. In addition, this study analyzed the moderated moderation effect of members' gender and resilience in the relationship between FFOC and innovative behavior. The results of this study, which empirically analyzed 1,026 employees of manufacturing companies in South Korea using SPSS regression analysis and PROCESS macro, are as follows. First, the FFOC showed a positive effect on innovative behavior. Second, gender had a moderating effect on the relationship between FFOC and innovative behavior. Specifically, men showed higher innovative behavior than women at the low FFOC level, but women showed higher innovative behavior than men at the high FFOC level. Finally, this research demonstrated the moderated moderation effect of gender and resilience in the relationship between FFOC and innovative behavior. ① When the FFOC was high, in the employee group with a low level of resilience, women's innovative behavior was higher than that of men. On the other hand, men's innovative behavior remained at a certain level regardless of FFOC. ② Also, in the employee group with a high level of resilience, the innovative behavior of men was higher than women regardless of FFOC. Based on the results of this study, theoretical and practical implications, research limitations, and future research directions were discussed.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.1-12
• /
• 2021

Here, we introduce a laser-induced graphene synthesis technology and its applications for the electric/electronic device manufacturing process. Recently, the micro/nanopatterning technique of graphene has received great attention for the utilization of these new graphene structures, which shows progress developments at present with a variety of uses in electronic devices. Some examples of practical applications suggested a great potential for the tunable graphene synthetic manners through the control of the laser set-up, such as a selection of the wavelength, power adjustment, and optical techniques. This emerging technology has expandability to electric/electronic devices combined together with existed micro-packaging technology and can be integrated with the new processing steps to be applied for the operation in the fields of biosensors, supercapacitors, electrochemical sensors, etc. We believe that the laser-induced graphene technology introduced in this paper can be easily applied to portable small electronic devices and wearable electronics in the near future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.969-976
• /
• 2020

Urban Air Mobility is attracting attention as a future innovation industry around the world, and leading industries are considering the application of composite materials for structural robustness and lightening in the designing and manufacturing new concept eVTOL aircraft. To apply composite materials to the new concept of eVTO aircraft, this paper was analyzed about composite material qualification system of FAA & EASA and institutionalized by Korea Government, including the procedures and methods, the organization to carry out the material verification for domestic conditions. The domestic composite material qualification system will not only make it easier for manufacturers of eVTOL aircraft with a new concept to apply composite materials to domestic aircraft through pre-material qualification, but also reduce the burden of material qualification within the period of type certification. In addition, domestic manufacturers of composite materials with qualified material quality and performance will be easy to enter for domestic aircraft applications and composite material manufacturers with experience in applying to aircraft will have a positive impact on overseas exports. This system will be able to promote the development eVTOL aircraft industry of a new concept and enhance international credibility of made aircraft in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.36-42
• /
• 2021

With recent developments in the Fourth Industrial Revolution, the manufacturing industry has changed rapidly. Through key aspects of Fourth Industrial Revolution super-connections and super-intelligence, machine learning will be able to make fault predictions during the foam-making process. Polyol and isocyanate are components in polyurethane foam. There has been a lot of research that could affect the characteristics of the products, depending on the specific mixture ratio and temperature. Based on these characteristics, this study collects data from each factor during the foam-making process and applies them to machine learning in order to predict faults. The algorithms used in machine learning are the decision tree, kNN, and an ensemble algorithm, and these algorithms learn from 5,147 cases. Based on 1,000 pieces of data for validation, the learning results show up to 98.5% accuracy using the ensemble algorithm. Therefore, the results confirm the faults of currently produced parts by collecting real-time data from each factor during the foam-making process. Furthermore, control of each of the factors may improve the fault rate.