• 한국의류학회지
• /
• 제24권7호
• /
• pp.1015-1024
• /
• 2000

The purpose of this study is 1) to analyse the bending property of the fused fabric and each component of the fused fabrics. 2) to examine the effect of fusing temperature on the bending property of the fused interlining and fused fabrics. 3) to examine the changes of B/W, 2HB/W and TAV of the fused fabrics according to the types of face fabric, interlining, fusing temperature. Five types of wool fabric, four types of shingosen fabric and four types of interlining were used for this study. The fusing condition in this study were the three types of fusing temperature of 10$0^{\circ}C$, 12$0^{\circ}C$, 14$0^{\circ}C$, the pressure of 4 kgㆍf/$cm^2$, and pressing time of 12 seconds. The results obtained from this study were as follows. 1) The bending rigidities and hysteresis of fabrics after fusing were increased. The bending behavior of fused fabrics were governed by the bending behavior of face fabric and interlinings and $\alpha$$_{B}$ values. 2) The KES standardized basic values of B/W and 2HB/W were increased after fusing. The B/Ws of fused fabrics were mainly determined by the $\alpha$$_{B}$ values of interlinings. The 2HB/Ws of fused fabrics seemed to be controlled by the fusing temperature. 3) The changes of TAVs of wool fused fabrics differed from those of shingosen fused fabrics. As the $\alpha$$_{B}$ values of fabric were larger and fusing temperature were increased, the TAVs of wool fused fabrics were smaller though those of shingosen fused fabrics were larger. 4) The TAVs of fused fabrics were highly correlated with the B/Ws of fused fabrics. In the case of wool fused fabrics, the TAVs of fused fabrics were negativly correlated with the 2HB/Ws of wool fabrics and used interlinings.nings.

• 치과방사선
• /
• 제20권1호
• /
• pp.79-89
• /
• 1990

The incidence and several characteristic features of fused and geminated teeth were studied radiographically, with full mouth periapical radiogram and pantomogram, in 4201 patients of mixed dentition and 5358 patients of permanent dentition. The obtained results were as follows: 1. The prevalence was revealed to 2.86%, 0.32%, 0.33%, and 0.06% in deciduous fused tooth, permanent fused tooth, deciduous geminated tooth and permanent geminated tooth respectively, and these anomalies were occured in female more than male. 2. Fused teeth were observed predominantly in lower anterior teeth area, especially in lateral incisor and canine region, and many cases of deciduous geminated tooth were observed in upper central incisor region. 3. Congenital missing rates of succedaneous tooth in deciduous fused teeth were 57.1 %, 85.7%, 71.0%, 69.0% in upper right and left central-lateral incisor regions, lower right and left lateral incisor-canine regions, respectively. 4. Prevalence of dental caries was 42.3%, 18.8% and 5.6% in deciduous fused, deciduous geminated and permanent fused tooth, respectively. 5. In classifying of fused and geminated teeth into 9 types, by following appearance such as number of crown, root, pulp chamber and pulp canal of those teeth, it was more favorable that Type Ⅰ(2 crown, 2 root, 2 pulp chamber, 2 pulp canal) in deciduous fused tooth and Type Ⅸ (I crown, 1 root, 1 pulp chamber, 1 pulp canal) in permanent fused tooth, deciduous and permanent geminated tooth.

• 한국의류학회지
• /
• 제23권1호
• /
• pp.22-29
• /
• 1999

This paper descrived the changes of peel strength wrinkle recovery and dimensional stability after fusing 4 different wool face fabrics with 3 different fusible interlinings. The fusing condition was conducted by fusing press machine under 4kg.f/cm2 at 15$0^{\circ}C$. To determine the effect of the varous physical properties of the fused fabrics face fabrics and interlinings on the peel strength wrinkle recovery and dimensional stability(hygral expansion and relaxation shrinkage) of fused fabrics correlation among the KES values of fused fabrics face fabrics and interlinings to the peel strength rinkle recovery and dimensional stability of fused fabrics were expeerimentally analyzed,. As the results the peel strength was mainly influenced by the cover factor of face fabric and interlinings. After fusing wrinkle recovery and hygral expansion were decreased. The cover factor wrinkle recovery weight thickness shear rigidity and frictional properties of face fabric and the thickness of fused fabrics were not influence to the wrinkle recovery of fused fabrics. In addition the dimensional stabilities of fused fabrics were mainly influenced by the tensile and frictional properties of the wrinkle recovery of fused fabrics. In addition the dimensional stabilities of fused fabrics were mainly influenced by the tensile and frictional properties of the face fabrics.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.362-369
• /
• 2011

In this paper, optimal deep reactive ion etching (DRIE) process conditions for fused quartz were experimentally determined by Taguchi method, and fused quartz-based micro cantilevers were fabricated. In addition, comparative study on Q-factors of fused quartz and silicon micro cantilevers was performed. Using a silicon layer as an etch mask for fused quartz DRIE process, different 9 flow rate conditions of $C_4F_8$, $O_2$ and He gases were tested and the optimum combination of these factors was estimated. Micro cantilevers based on fused quartz were fabricated from this optimal DRIE condition. Through conventional silicon DRIE process, single-crystalline silicon micro cantilevers whose dimensions were similar to those of quartz cantilevers were also fabricated. Mechanical Q-factors were calculated to compare intrinsic damping properties of those two materials. Resonant frequencies and Q-factors were measured for the cantilevers having fixed widths and thicknesses and different lengths. The Q-factors were in a range of 64,000 - 108,000 for fused quartz cantilevers and 31,000 - 35,000 for silicon cantilevers. The experimental results supported that fused quartz had a good intrinsic damping property compared to that of single crystalline silicon.

• 연구논문집
• /
• 통권22호
• /
• pp.107-113
• /
• 1992

The $\alpha$-alumina/fused alumina/$\beta$"-alumina specimens were fabricated by addition of fused alumina to $\alpha$-alumina/$\beta$"-alumina system. The sintered densities with and without fused alumina were almost same. But, the bending strength was decreased due to the presense of defects caused by the inhomogeneous dispersion of large fused alumina particles. And the fracture toughness was also decreased because the crack propagated through the fused alumina particles due to the imperfection of $\beta$"-alumina coating around them.

• Applied Biological Chemistry
• /
• 제14권3호
• /
• pp.183-189
• /
• 1971

규산재료(珪酸材料)인 강사(江砂) 및 석영(石英)과 농용(農用) 소석회(消石灰)의 혼합(混合) 용융물(溶融物)에 대(對)한 규산질(珪酸質) 비료(肥料)로써의 효과(效果)를 구명(究明)코져 유효규산함량(有效珪酸含量)이 낮은 답토괴(畓土壞)에서 수도(水稻)에 대(對)해서 천연(天然) 규회석(珪灰石)을 대조(對照)로 시비처리(施肥處理)하여 시험(試驗)한 결과(結果) 1. 모래용융물(溶融物)이 석영용융물(石英溶融物)에 비(比)하여 N/2 염산가용규산함량(鹽酸可溶珪酸含量)이 높고 2% 구연산 가용규산함량(可溶珪酸含量)은 석영용융물(石英溶融物)이 모래용융물(溶融物)보다 높았다. 2. 벼의 규산흡수량(珪酸吸收量)은 석영용융물(石英溶融物)에서 가장 크고 모래용융물(溶融物)과 규회석(珪灰石)은 거의 같았으며 이용율(利用率)은 천연(天然) 규회석(珪灰石)이 가장 높고 석영용융물구(石英溶融物區)가 모래용융물구(溶融物區)보다 높았다. 3. 정조수량(正租收量)은 규산물질(珪酸物質)의 시용(施用)으로 수량구성요소중(收量構成要素中) 수당입수(穗當粒數), 등숙률(登熟率) 및 천입중(千粒重)의 증가(增加)로 증수(增收)되었으며 공시재료중(供試材料中) 석영용융구(石英溶融區)에서 가장 크게 증수(增收)하였으며 대조구(對照區)${\fallingdotseq}$모래용융물(溶融物) 100kg/10a<천연규회석(天然珪灰石)${\fallingdotseq}$모래용융물(溶融物) 300kg/10a${\fallingdotseq}$석영용융물(石英溶融物) 100kg/10a<모래용융물(溶融物) 500kg/10a${\fallingdotseq}$석영용융물(石英溶融物) 300kg/10a<석영용융물(石英溶融物) 500kg/10a의 순서(順序)이었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.129-130
• /
• 2008

In this paper, optimal DRIE process conditions for fused quartz are experimentally determined by Taguchi method to develop high-performance inertial sensors based on the fused quartz material, which is known to have high Q-factors. Using Si layer as an etch mask, which was formed by previously developed bonding process of the fused quartz and Si wafer, fused quartz DRIE process was performed. Different 9 flow rate conditions of $C_4F_8$, $O_2$, He gas have been tested and the optimum combination of these factors was estimated. By this work, the ability to fabricate high aspect ratio fused quartz structure was confirmed.

• 대한치과의사협회지
• /
• 제58권7호
• /
• pp.398-403
• /
• 2020

Odontogenic anomalies can occur as a result of conjoining defects. These include fusion, gemination and concrescence. The presence of fused teeth can lead to various clinical problems, including the aplasia of permanent successor, the supernumerary teeth and delayed eruption of permanent teeth. In general, the supernumerary teeth associated with fusion is mainly found in the maxillary anterior region. This report describes rare cases of supernumerary tooth associated with fused teeth of mandibular primary lateral incisor and canine. In the first case, fused teeth was extracted. The supernumerary teeth was erupted at canine space. The second case is still being observed. Extraction of fused teeth and observation of supernumerary teeth is planned.

• 대한치과의사협회지
• /
• 제4권1호
• /
• pp.41-43
• /
• 1963

A rare case of a fused teeth on the side of upper left third molar was observed from a 28 years old Korean male. The characteristics were as follows: 1)The upper third molar fusrd with the suppernumerary tooth .2)The crown part of the fused teeth were separated and the root were fused. 3)On the x-ray finding. the pulp chamber was two , but it had only one pulp canal.

• 센서학회지
• /
• 제26권5호
• /
• pp.338-341
• /
• 2017

We have investigated a temperature sensor on a thermal expansion effect of a fused optical fiber coupler. Both side of the fused tapered region of the coupler were fixed on a metal support to induce the high thermal expansion effect. The sensor showed that the peak coupling wavelengths were shifted to shorted wavelength region with increased of environmental temperature. The sensitivity of the sensor was $0.12nm/^{\circ}C$.