• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.132-133
• /
• 2016

The Present that environmentally friendly policies at issue in the world recently, construction sector and other sectors are working on reducing CO₂. Cement production during in the construction sector, CO₂ is being caused in large quantities. Therefore, this study was secure the basic date that not use cement and use blast furnace slag and fly ash HFA, polysilicon in industrial byproducts about cement non-cement matrix.

• 한국세라믹학회지
• /
• 제32권11호
• /
• pp.1246-1254
• /
• 1995

A numerical model for fabrication and deposition of ultrafine SiO2 particles were proposed in the simplified horizontal MCVD apparatus using tube furnace reactor. The model equations such as energy and mass balance equations and the 0th, 1st and 2nd moment balance equations of aerosols were considered in the reactor. The phenomena of SiCl4 chemical reaction, SiO2 particle formation and coagulation, diffusion and thermophoresis of SiO2 particles were included in the aerosol dynamic equation. The profiles of gas temperature, SiCl4 concentration and SiO2 particle volume were calculated for standard conditions. The concentrations, sizes and deposition efficiencies of SiO2 particles were calculated, changing the process conditions such as tube furnace setting temperature, total gas flow rate and inlet SiCl4 concentration.

• 한국농공학회지
• /
• 제44권6호
• /
• pp.90-98
• /
• 2002

Recently the use of the antiwashout underwater concrete with the antiwashout admixture is increased considerably. Antiwashout underwater concrete is quite different in concept from conventional underwater concrete. By mixing an antiwashout admixture with concrete, the viscosity of the concrete is increased and its resistance to segregation under the washing action of water is enhanced. The aim of this research is to evaluate the fundamental characteristics and permeability of antiwashout underwater concrete with fly ash and blast-furnace slag. Test Results of antiwashout underwater concrete with fly ash and blast-furnace slag fluence can provide its excellent fundamental characteristics and resistance of permeability.

• 산업경영시스템학회지
• /
• 제29권1호
• /
• pp.151-154
• /
• 2006

The high degree of viscosity and the non-Newtonian fluid dynamics characterizes the process inside a glass furnace. Because the temperature is fluctuating in very short time-intervals, it is hard to determine that the status of its fluctuation is stable or unstable. Usually Shewhart-chart is used to determine the control status. However because of the characteristics of the temperature fluctuations in the glass furnace it does not directly serve the purpose here. Therefore we suggest using ARIMA to diagnose control status and confirm that the method using ARIMA can be a better tool than Shewhart-chart.

• Nuclear Engineering and Technology
• /
• 제39권6호
• /
• pp.731-736
• /
• 2007

Radioactive organic wastes containing acetone, alcohol, and particularly tributyl phosphate (TBP)/dodecane contaminated with uranium are extracted from the PUREX process and the decontamination of related equipment. An evaporation method that utilizes existing DU oxidation apparatuses and ventilation systems and a typical muffle furnace installed with an aspirating system are adopted. A separation method using phosphoric acid especially for the TBP/dodecane waste is also studied and evaluated. The results show that a simple evaporation process is utilizable for wastes containing acetone or alcohol with a lower boiling point. A modified muffle furnace is more appropriate to dispose directly of organic wastes having a higher boiling point, such as TBP/dodecane, without generating a condensed waste solution. It is recommended that, when the uranium concentration of TBP/dodecane waste is much higher than stipulated levels, separation technology should be applied to remove uranium from the mixture. Each type of solvent after separation can then be considered disposable below the regulatory limit in the modified furnace discussed in this study.

• 한국세라믹학회지
• /
• 제30권8호
• /
• pp.685-693
• /
• 1993

Boron cabride was prepared from the mixture of metal boron and graphite powders in Argon atmosphere by Self-propagating High-temperature Synthesis Chemical furnace. The most excellent mechanical properties were in the case that Fe was added as a sintering agent before the synthesis of the B4C in the Chemical furnace. Sintered B4C-5wt% Fe specimen showed the relative density of 95%, of theoretical value, and 3-point-flexural strength of 380MPa.

• 한국세라믹학회지
• /
• 제44권11호
• /
• pp.618-621
• /
• 2007

In this study, flint glass batches with blast furnace slag (BFS) were prepared and the contribution of the BFS to the fining of melts was studied through investigations of the melting and fining characteristics. Additionally, a sulfur redox reaction for BFS-doped melts was examined by square wave voltammetry (SWV). The results of the melting & fining test showed that BFS improved the fining of the melts. In a voltammogram of BFS-doped melts, two reduction peaks were shown at high frequencies while only one peak appeared at low frequencies. The peaks were located at a potential that was similar to those of melts fined by sulfate. From those results it was concluded that sulfide ($S^{2-}$) in BFS has effects in glass melts that are identical to those of sulfate ($SO_4^{2-}$).

• 한국지능시스템학회논문지
• /
• 제18권6호
• /
• pp.821-825
• /
• 2008

본 논문에서는 전기로에 투입되는 합금철의 중량을 보다 정밀하게 제어하기 위하여 Mamdani 타입의 퍼지 알고리듬을 적용하였다. 고안된 퍼지 시스템은 중량 오차 및 변화를 입력으로 하고 합금철 투입 바이브레이터의 진동의 크기를 출력으로 하며, programmable logic controller의 래더 프로그램으로 구현하여 현장에 적용하였다. 현장에 적용된 퍼지 제어 알고리듬은 기존의 온-오프 제어기에 비하여 전기로에 투입되는 합금철의 계량 정밀도를 높였을 뿐 아니라, 합금철 투입 시간도 크게 단축시켰다.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.51-57
• /
• 2014

This paper presents an algorithmic type computing technique of process coefficient in predicting model of temperature for reheating furnace and also suggests a design method of neural network model to find an adequate value of process coefficient for arbitrary operating conditions including test conditons. The proposed neural network use furnace temperature, line speed and slab information as input variables, and process coefficient is output variable. Reasonable process coefficients can be obtained by an algorithmic procedure proposed in this paper using process data gathered at test conditons. Also, neural network model output equal process coefficient under same input conditions. This means that adquate process coefficients can be found by only computing neural network model without additive test even if operating conditions vary.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.156-158
• /
• 2005

The computation of design parameters and the electromagnetic analysis of 0.5 Mw- class Induction furnace with 3-dimensional modeling are Introduced by using FEM techniques, And model of flux distribution and eddy current distribution induced in induction furnace are analyzed and presented. It is more necessary that for melting industry depending on metal material field, the design technique of induction furnace is quite urgent at exchanging introduction of technology between metal material and electrical energy conversion by power electronics field.