• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.6
• /
• pp.548-561
• /
• 2015

Atmospheric concentrations of polychlorinated dibezo-p-dioxins and furans (PCDD/Fs) were investigated at urban-residential (Group I: Suwon, Guri and Goyang), industrial (Group II: Ansan, Siheung and Bucheon), urban-rural mixed (Group III: Yangju, Pocheon and Dongducheon) and rural regions (Group IV: Yangpyeong) in Gyeonggi-do from February 2012 to November 2012 quarterly. The concentrations of PCDD/Fs ranged from 0.018 to $0.109pgTEQm^{-3}$ in Group I (mean value: $0.061pgTEQm^{-3}$), 0.059 to $0.367pgTEQm^{-3}$ in Group II (mean value: $0.179pgTEQm^{-3}$), 0.072 to $0.836pgTEQm^{-3}$ in Group III (mean value: $0.334pgTEQm^{-3}$) and 0.014 to $0.066pgTEQm^{-3}$ in Group IV (mean value: $0.034pgTEQm^{-3}$), respectively. In spite of the less PCDD/F emission sources than Group II (industrial regions), the level of PCDD/Fs in urban-rural mixed area showed the highest values with high fluctuation. It's likely that the Group III was affected by fugitive emissions such like biomass burning and unregulated open burning. The mean contribution of particle phase to total PCDD/F concentration was above 83% because most of PCDD/F congeners were partitioned into particle phase. We evaluated their gas-to-particles equilibriums with the regression between the particle-gas partition coefficient, $K_P(m^3{\mu}g^{-1})$ and corresponding subcooled liquid vapor pressure ($P_L$). The logarithm-$K_P$ of PCDD/Fs was poorly correlated with $P_L$ at low ambient temperature (below $10^{\circ}C$) and the slope (m) values for log-log plots of the $K_P$ vs. $P_L$ was steeper in the Group 2 and Group 3 than residential area. It implies that the slope values were likely influenced by both the direct emission source of PCDD/Fs and ambient temperature.

• Korean Journal of Food Science and Technology
• /
• v.43 no.3
• /
• pp.291-302
• /
• 2011

The effects of roasting condition and storage time on rancidity of rapeseed oil were studied. Rapeseed oil from rapeseed roasted under different conditions were stored in the dark at $17^{\circ}C$. Volatile compounds of rapeseed oil were analyzed with an electronic nose (E-nose) and gas chromatography-mass spectrometry (GC-MS). The data from the E-nose were analyzed using discriminant function analysis (DFA). As roasting temperature increased from 150 to $240^{\circ}C$ over 20 min, the first discriminant function score (DF1) moved from positive to negative. DF1 decreased with storage time and changes in DF1 were higher between 0 and 2 days and between 20 and 24 days. Twenty-four compounds were identified in rapeseed oil, and hydrocarbons, furans, ketones, acids, benzene, and aldehydes were detected by GC-MS. The number of formed volatile compounds increased as storage time increased, but no increase in these compounds was detected by GC-MS.

• Korean Journal of Food Science and Technology
• /
• v.43 no.3
• /
• pp.271-276
• /
• 2011

Volatile profiles of beverages and encapsulated powders containing Artemisia princeps Pampan extracts were analyzed by solid-phase microextraction-gas chromatography/mass spectrometry during production and storage. Beverages containing 0.32 and 0.64% extracts were stored at room temperature for 8 weeks and $60^{\circ}C$ for 8 days, respectively. Encapsulated particles were stored at room temperature and $60^{\circ}C$ for 8 days. Total volatiles in beverages decreased significantly during storage, irrespective of storage condition (p<0.05). Terpenoids, including cymene, thujone, and ${\beta}$-myrcene, were major volatiles in beverages, and some volatiles including ethylfuran, vinylfuran, and 2-fufural increased in 60oC samples only. Total volatiles in microcapsules at room temperature were not significant different for 8 days (p>0.05), whereas those at $60^{\circ}C$ increased by 16.5 times. Limonene was the most detected volatile in microcapsules, and aldehydes such as hexanal, pentanal, and octanal, and furans such as 2-butylfuran and 2-pentylfuran increased in the $60^{\circ}C$ samples, which may have originated from oxidized lipids used in the microcapsules.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.827-838
• /
• 1997

Optimal substrates and reaction conditions were studied to develop boiled or roasted meat flavor by Maillard reaction under a model system. Sugars for the reactions were xylose, ribose, glucose, lactose, maltose, and sucrose. Amino acids were cystine, cysteine, methionine, lysine, and glycine as the reaction substrates. The reacted solutions were measured their absorbances at 278 nm and 420 nm and were evaluated their sensory properties. Except cysteine, the pentose mixtures with all of the four amino acids showed a faster reaction rate than those mixtures with hexose or disaccharides. pH was decreased rapidly until 8 hours and then changed a little thereafter. Sensory evaluation showed that cystine-lactose or cystine-xylose from single substrate and cystine-lactose-maltose, and cystine-lactose-xylose from mixed substrates reacted at $100^{\circ}C$ for 16 or 20 hours were found to be close to boiled or roasted meat flavor. The volatile compounds from the four selected sugar-amino acid solutions by GC/MS were 8 hydrocarbons, 10 aldehydes, 6 ketones, 7 alcohols, 2 aromatics (benzene), 1 ester, 4 furans, 1 base and 5 sulfur compounds.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.561-567
• /
• 2013

Mixed hardwood chips were pre-pulping extracted with green liquor prior to kraft pulping in order to recover hemicelluloses for use as biofuels. This green liquor solution containing mainly sodium sulfide and sodium carbonate was applied at different alkali charges (expressed as $Na_2O$) of 0, 1, 3, and 5% on dry wood weight. The extractions were performed at $160^{\circ}C$ for residence times ranging from about 1-2 h to determine the effect of extraction severity on composition of the pre-pulping extract. The severity of hemicellulose extraction time and green liquor charge controls the concentration of acetic acid and monosaccharide sugars available for downstream processing, the accumulation of degradation products such as organic acids and furans in the extract. As the alkali charge was increased, the amount of acetate side chains on the hemicelluloses and the dissolved lignin in the extract increased but the carbohydrate and sugars in the extract decreased appreciably. Hot water extraction (0% alkali addition) released the greatest amount of carbohydrates, up to 29.80 g/L measured as component sugars, but resulted in the greatest decrease in pulp yield. Meanwhile, pre-pulping extraction with 3% green liquor increased the pulp yield while greatly reducing the component sugars to 7.08 g/L. Fundamental data obtained in this study will allow selection of optimum hemicellulose extraction conditions for integrating the extraction operation into the Kraft pulping process.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.154-163
• /
• 2005

Chemical and flavor components of Bulro Kugi (Lycium chinense Mill) fruit leaf, and root were compared. Fructose and glucose were detected in fruit and leaf, and sucrose in root, respectively. Citrate was the highest among organic acids in fruits, and malate in leaf and root Capsaicin was detected in leaf and root. Volatile flavor compounds were extracted by simultaneous distillation and extraction method using Likens and Nickerson's extraction apparatus. Concentrated flavor extract was analysed, and 128 compounds, including 22 acids 15 alcohols, 12 aldehydes, 8 esters, 10 furans, 26 hydrocarbons, 4 phenols, 2 pyrroles, 1 pyrazine, and 28 miscellaneous components. were identified by GC and GC-MS. Main volatile compounds were hexadecanoic acid and 2-furancarboxaldehyde in hot-air dried fruit, hexadecanoic acid and 1-hexadecene in fresh fruit, 3, 7, 11, 15-tetranethyl-2-hexadecan-1-ol and hexadecanoir acid in leaf, and hexadecanoic acid in root.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.176-187
• /
• 1988

Volatile flavor components in the Chinese quince fruits were trapped by simultaneous steam distillation-extraction method, and these were fractionated into the neutral, the basic, the phenolic and the acidic fraction. In the identification of carboxylic acids, the acidic fraction was methylated with diazomethane. Volatile flavor components in these fractions were analyzed by the high-resolution GC and GC-MS equipped with a fused silica capillary column. The total of one hundred and forty-five compounds from the steam volatile concentrate of the Chinese quince fruits were identified: they were 3 aliphatic hydrocarbons, 1 cyclic hydrocarbon, 4 aromatic hydrocarbons, 9 terpene hydrocarbons, 17 alcohols, 3 terpene alcohols, 6 phenols, 21 aldehydes, 7 ketones, 28 esters, 27 acids, 3 furans, 2 thiazoles, 2 acetals, 3 lactones and 9 miscellaneous ones. The greater part of the components except for carboxylic acids were identified from the neutral fraction. The neutral fraction gave a much higher yield than others and was assumed to be indispensable for the reproduction of the aroma of the Chinese quince fruits in a sensory evaluation. According to the results of the GC-sniff evaluation, 1-hexanal, cis-3-hexenal, trans-2-hexenal, 2-methyl-2-hepten-6-one, 1-hexanol, cis-3-hexenol, trans, trans-2, 4-hexadienal and trans-2-hexenol were considered to be the key compounds of grassy odor. On the other hand, esters seemed to be the main constituents of a fruity aroma in the Chinese quince fruits.

• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1740-1745
• /
• 2011

Volatile flavor compounds of 3 commercial products of black onion extract (produced in Changnyeong, Muan and Jeungpyeong) purchased in the online/offline markets were analyzed. A total of 51 compounds were detected in samples by solid phase microextraction (SPME)/GC/MSD, consisting mainly of carbonyl compounds (15), sulfur-containing compounds (8), aromatic compounds (6), furans (6), nitrogen-containing compounds (3), alcohols (2), acids (2) and miscellaneous compounds (10). Among carbonyls, 4 compounds including 2-methylbutanal, 3-methylbutanal, nonanal and benzaldehyde were detected in all samples, while two sulfur containing compounds, dimethyl disulfide and dimethyl trisulfide, were detected in high amounts and considered to be key flavors in black onion extracts. Particularly, thiophenes and 3 sulfur containing compounds (methylpropyl disulfide, methyl-(Z)-propenyl disulfide and methyl-(E)-propenyl disulfide) were detected only in two products. With acetic acid, furfural and pyrazines that formed through Maillard reaction during black onion aging were detected in high amounts in all samples. This also contributed to characteristic flavors such as roasted, sweet, and sour, in the flavor of black onion extracts.

• Journal of Life Science
• /
• v.15 no.4 s.71
• /
• pp.548-552
• /
• 2005

Volatile fragrance components in 5 kinds of Korean native Lilium were investigated and compared. The volatile components were extracted by SDE (simultaneous steam distillation and extraction) and identified by CC and GC-MS. As a result of the analysis of volatile aromatic ingredient of L. leichtlinii var. tigrinum Nickels., L. concolor var. parthneion Bak., L. tsingtauense Gilg., L. hansonii Leichtl., and L. amabile Palibin., using frozen materials, 60 kinds of volatile compound were identified, which were 28 aldehydes, 9 ketones, 8 alcohols, 5 esters, 5 acids, 3 furans and 2 others. The GC patterns of the aroma components of all samples resembled but the peak areas were different according to species, though all of them are Korean native Liliums.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.16-29
• /
• 2009

This paper describes characteristics of pollutants in wastewater from the pulp and paper industry and biological technologies for the wastewater treatment. The wastewater from the pulp and paper industry contains high concentrations of biochemical oxygen demand (BOD) and chemical oxygen demand (COD) and shows high toxicity and strong black-brown color. In particular, organic chlorinated compounds such as dioxins and furans may be formed by the chlorination of lignin in wood chips. Thus the pulp and paper industry is recently trending toward total chlorine-free (TCF) bleaching processes. All biological technologies for pulp and paper wastewater treatment are based on the contact between wastewater and bacteria, which feed on organic materials in the wastewater, thus they reduce BOD concentration in it. Both aerobic and anaerobic treatments were found to be effective for the wastewater treatment. Furthermore, advanced technologies such as fungal application and combined biological-filtration process have been also introduced to the wastewater treatment field. These technologies would be useful for water recycling to reduce water consumption throughout pulp and paper making process.