• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.10-18
• /
• 2018

The primary purposes of this study are to understand a fundamental aspect of current uniformity around a reinforcing bar (rebar) in cement mortar, and to develop an accurate monitoring method in a wet-dry cycling process with the alternative current (AC) impedance method. Three cement mortar specimens with two embedded rebars were prepared in the laboratory. As a main variable, the distance between two rebars was designed to be 10, 20 and 30 mm with the same thickness of 20 mm. To simulate the corrosion of rebars in concrete structures in a marine environment, three cement mortar specimens were exposed to 15 wet-drying cycles (24-hour-immersion in seawater and 48-hour-drying in a room temperature) in the laboratory. It was observed that the potential level shifted to a noble value during corrosion potential monitoring, which is attributed to acceleration of dissolved oxygen diffusion at the drying process. AC impedance was measured in a frequency range from 100 kHz to 1 mHz on a wet-drying process. A theoretical model was proposed to explain the interface condition between the rebars and cement mortar by using the equivalent circuit consisting of a solution resistance, a charge transfer resistance and a CPE (constant phase element). It was observed that the diffusion impedance appeared in a low frequency range as corrosion of rebars progresses. At the drying stage of the wet-drying cycles, the currents line for monitoring tended to be non-uniform at the interface of rebar/mortar, being phase shift, ${\theta}$, close to $-45^{\circ}$.

• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.329-345
• /
• 1996

The purposes of this study are to review research trends of applied geography field, to retrospect geographical works done by Korean geographers in applied geography, and to prospect the future of applied geography. We are in the period where societal problems such as energy, transportation, pollution, environment, health care, and many others, require careful consideration and need throughout strategies for solution. Most societal problems have some geographical dimensions. Because these problems are geographic in nature, there is an obvious implication that geography as a discipline has something to offer in their solutions. In fact, most geographic problems are best presented and analyzed through the applications of geographic theories, concepts and tools. Applied geography is a branch of general geography. It relies on the scientific methods and uses the principles and methods of pure geography. However applied geography is different in that it analyzes and evaluates real world action and planning and seeks to implement and manipulate environmental and spatial realities. Thus, geographic theories and other social theories that have geographic dimensions are fundamental to applied geography. Applied geography has a short history as theme in Korean geography. During the last two decades. Korea achieved remarkable economic growth. We have also encountered widening regional disparity, housing shortage of larger cities, transportation congestion, environmental pollution and many other problems. Applied geographers have tried to analyze and solve such spatial problems during the last 30 years. The research trend of Korean applied geography can be subdivided into 5 categories: (1) land use analysis and efficient utilization, (2) national physical development and planning. (3) regional development and regional planning, (4) tourism and location-allocation, transportation planning. Still the overconcentration of Seoul metropolitan region and unbalanced regional development are perceived to be the serious spatial problems which may induce more works to solve these problems. In Korea new emphasis has to be given to some professional training and experimental learning, including methodology, field techniques data management, statistical analysis, cartography, GIS, and other tools, as applicable and beneficial to problem solving in real world. The growth of applied geography depends on new insights and purposed solutions of future applied geographers in Korea. Applied geographers will contribute to the creation of future Korean geographies.

• Membrane Journal
• /
• v.26 no.3
• /
• pp.197-204
• /
• 2016

The objective of this work was to investigate the performance of pervaporation process for recovery of ester compounds from model aqueous solutions and how the fluxes of esters and water were affected by changes in feed concentration and temperature. The flux of ethyl acetate (EA), propyl acetate (PA), ethyl propionate (EP), butyl acetate (BA), and ethyl butyrate (EB) increased with an increase in feed concentration from 0.15 wt% to 0.60 wt%, and increased with temperature change from $30^{\circ}C$ to $50^{\circ}C$. The flux of esters (EA, PA, EP, BA, and EB) was in order of (EA) < (PA, EP) < (BA, EB). This result meant that the flux strongly depended on affinity between esters and membrane surface; EA is the least hydrophobic because it has one hydrophobic function group ($-CH_2-$), (PA, EP) have two ($-CH_2-$), and (BA, EB) are the most hydrophobic because these have three ($-CH_2-$). As well as such an influence of hydrophobicity of ester molecules on ester flux, the influence of hydrophobicity of membrane surface on ester flux needs further investigation. With increase in temperature, water flux of aqueous EA, PA, EP, BA, and EB solution increased. However, water flux of aqueous ester solutions did not change appreciably with increase in concentration. This experimental results may be used as fundamental data for pervaporation (PV) to improve the aroma recovery process as an alternative to thermal evaporation and distillation processes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.150-164
• /
• 2013

Currently it is being gradually focused on the mobile application's processing performance implemented by Javascript and HTML (Hyper Text Markup Language) due to the dissemination of mobile web application supply based on the WAC (Wholesale Application Community). If the application software has a simple functional processing structure, then the problem is benign, however, the load of a browser is getting heavier as the amount of Javascript processing is being increased. There is a limitation on the processing time and capacity of the Javascript in the ordinary mobile browsers which are on the market now. In order to solve those problems, the Web Worker that is not supported from the existing Javascript technology is now provided by the HTML 5 to implement the multi thread. The Web Worker provides a mechanism that process a part from the single thread through a separate one. However, it can not guarantee the computing ability as a native application on the mobile and is not enough as a solution for improving the fundamental processing speed. The Cyclostorm overcomes the limitation of resources as a mobile client and guarantees the performance as a native application by providing high computing service and ascripting the Javascript process on the mobile to the computer server on the cloud. From the performance evaluation experiment, the Cyclostorm shows a maximally 6 times faster computing speed than in the existing mobile browser's Javascript and 3 to 6 times faster than in Web Worker of the HTML 5. In addition, the usage of memory is measured less than the existing method since the server's memory has been used. In this paper, the Cyclostorm is introduced as one of the mobile cloud computing services to conquer the limitation of the WAC based mobile browsers and to improve the existing web application's performances.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.252-260
• /
• 2015

The aim of this research is providing the fundamental data for treating and recycling the byproducts by using the wet processed bottom ash as a fine aggregate replacement for cement-based extruded panel. Although the cement-based extruded panel was used mainly as a cladding component with its high strength and outstanding durability, it was hardly spread because of low economic feasibility due to the high cost of additives or fibers which were used to achieve 14 MPa of flexural strength as a cladding material. As a solution of this drawback, by the previous research, it was possible to replace cement by fly ash up to 80 % by decreasing quality criteria with restricting the application to indoor purpose. In this research, based on the previous research, by using the bottom ash as a replacement of fly ash, improvement of shape retention performance is tried. As a result of the experiment on evaluating the optimum content and PSD of bottom ash, as the fineness modulus and content of bottom ash was increased, the extruding performance was decreased and penetration resistance was increased. Additionally, the optimum content and the maximum particle size was found as 20 %, and 0.3 mm, respectively.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.4 s.304
• /
• pp.11-18
• /
• 2005

For expressing intention the human often use body languages as well as vocal languages. Of course the gestures using arms and hands are the representative ones among the body languages. Therefore it is very important to understand the human arm motion in human-computer interaction. In this respect we present here how to estimate 3D pose of human arms by using computer vision systems. For this we first focus on the idea that the human arm motion consists of mostly revolute joint motions, and then we present an algorithm for understanding 3D motion of a revolute joint using vision systems. Next we apply it to estimating 3D pose of human arms using vision systems. The fundamental idea for this algorithm extension is that we may apply the algorithm for a revolute joint to each of the revolute joints of hmm arms one after another. In designing the algorithms we focus on seeking closed-form solutions with high accuracy because we aim at applying them to human computer interaction for ubiquitous computing and virtual reality.

• Journal of Families and Better Life
• /
• v.29 no.4
• /
• pp.109-123
• /
• 2011

The importance of finance in our society is truly absolute, and the of financial consumers who cope with the financial environment is becoming. Recently, many authorities in Korea to perceive the absence of serious economic or financial consumer education in order to find a fundamental solution for such a phenomenon, there is a growing need to introduce financial consumer education. This study aims to review the comprehension power of finance among consumers are college students in this society the importance of finance is becoming greater, and to a way promote financial consumer education by analyzing the demand level for The main results obtained from the include the following. First, as a result of reviewing the characteristics of respondents, their average age was 21.8 years old, and on average they each had 4.16 credit cards. Most of them had no experience of receiving financial consumer education in their teenage years, and their interest level in investment was shown to be above average. Second, as a result of reviewing their comprehension power of finance, it was shown to be 64.10 points on average their comprehension of the income area was the highest, their comprehension money management was shown to be the lowest. Third, as a result of reviewing the perception level of the provision of financial consumer education, it was shown to be very low the perception level of on-line and off-line financial consumer education provided by the YMCA was shown to be the highest. Fourth, as a result of reviewing the level financial consumer education, it was shown to be very high. For the level for institutions financial consumer education, financial institutions the highest. For the level for the method of financial consumer education, respondents chose practical experience the most and education books the least. For the intention of participating in financial consumer education, most respondents that they would participate, and most of them answered that the starting period should be the teenage years and childhood Therefore, as a result, most university student's consumers have concerned on financial education and financial inportance, it need to educate for the university student's consumers, and it need to develop technical tools and contents for ficancial education.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.561-567
• /
• 2013

Mixed hardwood chips were pre-pulping extracted with green liquor prior to kraft pulping in order to recover hemicelluloses for use as biofuels. This green liquor solution containing mainly sodium sulfide and sodium carbonate was applied at different alkali charges (expressed as $Na_2O$) of 0, 1, 3, and 5% on dry wood weight. The extractions were performed at $160^{\circ}C$ for residence times ranging from about 1-2 h to determine the effect of extraction severity on composition of the pre-pulping extract. The severity of hemicellulose extraction time and green liquor charge controls the concentration of acetic acid and monosaccharide sugars available for downstream processing, the accumulation of degradation products such as organic acids and furans in the extract. As the alkali charge was increased, the amount of acetate side chains on the hemicelluloses and the dissolved lignin in the extract increased but the carbohydrate and sugars in the extract decreased appreciably. Hot water extraction (0% alkali addition) released the greatest amount of carbohydrates, up to 29.80 g/L measured as component sugars, but resulted in the greatest decrease in pulp yield. Meanwhile, pre-pulping extraction with 3% green liquor increased the pulp yield while greatly reducing the component sugars to 7.08 g/L. Fundamental data obtained in this study will allow selection of optimum hemicellulose extraction conditions for integrating the extraction operation into the Kraft pulping process.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.21-31
• /
• 2002

This study applied each Neural Networks theory and Fuzzy Set theory to improve accuracy in remotely sensed images. Remotely sensed data have been used to map land cover. The accuracy is dependent on a range of factors related to the data set and methods used. Thus, the accuracy of maps derived from conventional supervised image classification techniques is a function of factors related to the training, allocation, and testing stages of the classification. Conventional image classification techniques assume that all the pixels within the image are pure. That is, that they represent an area of homogeneous cover of a single land-cover class. But, this assumption is often untenable with pixels of mixed land-cover composition abundant in an image. Mixed pixels are a major problem in land-cover mapping applications. For each pixel, the strengths of class membership derived in the classification may be related to its land-cover composition. Fuzzy classification techniques are the concept of a pixel having a degree of membership to all classes is fundamental to fuzzy-sets-based techniques. A major problem with the fuzzy-sets and probabilistic methods is that they are slow and computational demanding. For analyzing large data sets and rapid processing, alterative techniques are required. One particularly attractive approach is the use of artificial neural networks. These are non-parametric techniques which have been shown to generally be capable of classifying data as or more accurately than conventional classifiers. An artificial neural networks, once trained, may classify data extremely rapidly as the classification process may be reduced to the solution of a large number of extremely simple calculations which may be performed in parallel.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.11
• /
• pp.5-15
• /
• 2011

This paper presents two analysis methods for characterizing the non-linear finite strain consolidation behavior of highly deformable dredged soil deposits along with the fundamental parameters obtained in the companion paper; that is, the zero effective stress void ratio, the non-linear relationships of void ratio-effective stress and void ratio-hydraulic conductivity. The simplified Morris's analytical solution (2002) and the widely recognized numerical program, PSDDF (primary Consolidation, Secondary Compression, and Desiccation of Dredged Fill) for both single and double drainage conditions are adopted in this paper to verify a series of laboratory experiments for self-weight consolidation of the Incheon clay and Kaolinite. The comparisons show that the analysis methods proposed herein can properly simulate the long-term non-linear finite strain consolidation behavior for dredged soils in the field. In addition, a case study for the artificial Craney Island has been conducted to illustrate the importance of obtaining appropriate non-linear finite strain consolidation parameters and the applicability of PSDDF in promoting dredged soil disposal.