• 한국가구학회지
• /
• 제10권2호
• /
• pp.55-61
• /
• 1999

This research was carried out to investigate the fundamental properties such as the structure of annual ring, density distribution, compressive strength with parallel to grain, relative crystallinity, and microfibril angle of Gumgangsong(Pinus densoflora for. erecta Uyeki). The wood specimens, Gumgangsong and Sonamu(Pinus densiflora S. et Z.), for this experiment were prepared at Ulijingoon Sokwangri and Kyungpook university's forest in Kyungpook province, respectively. Average annual ring width is $2.0mm{\pm}0.3$ in heartwood of Gumgangsong. The respectively of heart wood was over 60 percent in Gumgangsong and 20~50 percent in Sonamu. Heartwood density were ranged from 0.5 to $0.8{\;}g/cm^3$ in Gumgangsong and from 0.4 to $0.5{\;}g/cm^3$ in sonamu. Compressive strength in Gumgangsong and Sonamu was about $30{\pm}5MPa$ and $25{\pm}5MPa$, resepectively. But the relative crystallinity and microfibril angle of two species were not different clearly. From these results of Gumgangsong and Sonamu, therefore, it was considered the main difference factors for both species were annual ring width and heartwood percentage.

• Journal of the Optical Society of Korea
• /
• 제2권1호
• /
• pp.1-4
• /
• 1998

The second harmonic light of an 842 nm diode laser was generated from a KNbO3 crystal in an external ring resonator. The power of the second harmonic light was about 0.8 mV at an input fundamental power of 87 mW. The laser frequency was stabilized to the resonance frequency of the ring resonator, and the frequency fluctuation was measured as about 3 MHz.

• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.28-34
• /
• 2008

MRI(magnetic resonance imaging)의 신호검출기로 활용 가능한 간단한 형태의 자기장 검출기를 제안하였다. 제안된 검출기는 SRR(split ring resonator)이라고 하는 음의 투자율을 구현하는데 최초 사용되었던 일종의 LC 공진회로와 간단한 루프안테나를 유도성 결합시킨 것으로 기존의 MRI 신호검출기에 비해 단순한 구성으로 유사한 감도를 가질 수 있음을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.650-656
• /
• 2014

We propose a novel active fiber design for selectively generating cylindrical vector beams (CVBs) or cylindrical vector modes (CVMs) which can be applied to conventional fiber lasers. A fiber is designed to have a ring-shaped core refractive index profile which can lead to the best overlap between the active dopant distribution profile and the lowest-order CVM (LCVM) field profile. Therefore, the overlap factor (OVF) of the LCVM becomes even higher than that of the fundamental mode. We emphasize that this condition cannot be satisfied by a conventional step-index core fiber (SICF) but by the ring-doped core fiber (RDCF). Because the lasing threshold is inversely proportional to the OVF, the LCVM can predominantly be stimulated even without going through special procedures to impose extra loss mechanisms to the fundamental mode. We numerically verify that the OVF of the LCVM with the doped ions can significantly exceed that of the fundamental mode if the proposed fiber design is applied. In addition, an RDCF of the proposed fiber design can also operate in a regime containing no higher-order modes besides the LCVM, so that it can selectively and efficiently generate the LCVM without being disrupted by the parasitic lasing of the higher-order modes. We highlight that an optimized RDCF can lead to a >30 % higher OVF ratio than a SICF having the same doped area. The proposed model is expected to be useful for enhancing the efficiency of generating CVBs in an all-fiber format.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권10호
• /
• pp.2692-2707
• /
• 2012

A separable identity-based ring signature scheme has been constructed as a fundamental cryptographic primitive for protecting user privacy. Using the separability property, ring members can be selected from arbitrary domains, thereby, giving a signer a wide range of ways to control privacy. In this paper we propose a generic method to construct efficient identity-based ring signature schemes with various levels of separability. We first describe a method to efficiently construct an identity-based ring signature scheme for a single domain, in which a signer can select ring identities by choosing from identities defined only for the domain. Next, we present a generic method for linking ring signatures constructed for a single domain. Using this method, an identity-based ring signature scheme with a compact structure, supporting multiple arbitrary domains can be designed. We show that our method outperforms the best known schemes in terms of signature size and computational costs, and that the security model based on the separability of identity-based ring signatures, presented in this paper, is highly refined and effective by demonstrating the security of all of the proposed schemes, using a model with random oracles.

• Computers and Concrete
• /
• 제28권6호
• /
• pp.559-566
• /
• 2021

In this paper, frequency analysis has been done for functionally graded cylindrical shell with ring supports using Sander's shell theory. The vibrations of rotating cylindrical shells are analyzed for different physical factors. The fundamental natural frequency is investigated for different parameters such as: ratios of length-to-diameter ring supports. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing height-to-radius ratio. The frequencies for different position of ring supports are obtained in the form of bell shaped. The backward frequencies increases and forward frequencies decrease on increasing the rotating speed. The results generated furnish the evidence regarding applicability of present shell model and also verified by earlier published literature.

• Structural Engineering and Mechanics
• /
• 제88권2호
• /
• pp.109-115
• /
• 2023

In this paper, frequencies of zigzag structure of carbon nanotubes isinvestigated based on Donnell shell theory. These tubes are wrapped with the ring supports in the axial direction. The fundamental frequency curves displayed in article show the dependence of vibrations attributes to zigzag single walled carbon nanotubes. Various zigzag indices are introduced against the variation of length to predict the vibration. Also, the influence of ring supports is sketched with proposed structure for frequency analysis. The frequencies of zigzag tube decreases as the length increases. It is observed that the frequencies decreases with ring support and have higher frequencies without ring. The problem is formulated using Partial Differential Equation. Three expressions of modal deformation displacement functions is used for the elimination of temporal variation to form the solution in the eigen from. For the stability of present study the results are compared with experimentally and numerically in the open text.

• Korean Journal of Mathematics
• /
• 제15권1호
• /
• pp.79-85
• /
• 2007

We study codes over the polynomial ring $\mathbb{F}_q[D]$ and introduce the notion of basic codes which play a fundamental role in the theory.

• Korean Journal of Mathematics
• /
• 제22권1호
• /
• pp.151-167
• /
• 2014

Let M, N be modules over a ring R and $[M,N]=Hom_R(M,N)$. The concern is study of: (1) Some fundamental properties of [M, N] when [M, N] is regular or semipotent. (2) The substructures of [M, N] such as radical, the singular and co-singular ideals, the total and others has raised new questions for research in this area. New results obtained include necessary and sufficient conditions for [M, N] to be regular or semipotent. New substructures of [M, N] are studied and its relationship with the Tot of [M, N]. In this paper we show that, the endomorphism ring of a module M is regular if and only if the module M is semi-injective (projective) and the kernel (image) of every endomorphism is a direct summand.

• 한국자동차공학회논문집
• /
• 제2권3호
• /
• pp.94-104
• /
• 1994

In order to improve engine performance and its reliability it is very important to find the friction force between piston-ring assembly and cylinder wall in engine operating conditions. A new system was developed for the piston-ring assembly friction force measurement. This system had a relatively high fundamental frequency at 884 Hz and a fine resolution of 0.5N in friction force measurement. Comparing with existing floating liner systems this systems required small installation space and at the same time alleviated the system noise problem induced by the thrust and slap impulse forces.