• International Journal of Korean Welding Society
• /
• 제1권1호
• /
• pp.1-6
• /
• 2001

This paper describes several advances in sensor and process control techniques for applications in Submerged Arc Welding (SAW), which combine to give a fully automatic system capable of controlling and adapting the overall welding process. This technology has been applied in longitudinal and spiral pipe mills and in pressure vessel production.

• 전기전자학회논문지
• /
• 제14권3호
• /
• pp.182-189
• /
• 2010

본 논문은 논어파인 완전궤환 비선형시스템에 대한 적응 신경망 제어기를 제안한다. 제안하는 방법은 원래의 계통식을 새롭게 정의되는 상태변수에 대해서 표준 정규식으로 재구성하여 제어식을 구성함으로써 기존의 알고리듬에서 일반적으로 사용하는 백스태핑(backstepping)을 회피할 수 있다는 장점을 갖는다. 백스태핑을 회피함으로서 본 논문에서 제안하는 새로운 방법은 기존의 제어 알고리듬에 비해서 제어기 구조와 안정도 증명이 현저히 간략해 지게 되는 장점을 갖는다. 제안된 제어기는 미지의 이상 제어식을 근사화하기 위해서 오직 하나의 신경망만을 사용하며 이점 역시 기존의 제어알고리듬이 다수의 신경망을 사용하는 것과 구별되는 점이다. 모의실험을 통하여 제안된 알고리듬의 성능과 효율을 보인다.

• 드라이브 ㆍ 컨트롤
• /
• 제14권3호
• /
• pp.8-17
• /
• 2017

With automobiles sharply increasing in numbers worldwide, we are faced with critical social issues such as traffic accidents, traffic jams, environmental pollution, and economic inefficiency. In response, research on ITS is promoted mainly by regions with advanced automotive industry such as the U.S., Europe, and Japan. While Korea is working on moving forward in the global market through developing and turning to global standards systems related to ASV (Advanced Safety Vehicle), the country is not fully prepared for such projects. The purpose of ACC (Adaptive Cruise Control) is to control a vehicle's longitudinal speed and distance and minimize driver workload. Such a system should be valuable in preventing accidents, as it reduces driver workload in the 21st-century world of telematics created by development of the automobile culture industry. In this light, the thesis presents a method to test and evaluate ACC system and a mathematical method to assess distance. For the proposed test and evaluation, theoretical values are tested with vehicle test and a database is acquired, by using vehicles equipped with an ACC system. Theoretical evaluation criteria for developing ACC system may be used and scenario-specific evaluation methods may find useful application through testing the formula proposed by comparing the database and mathematical method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.505-510
• /
• 1994

To prevent the stable states from the complex dynamics, the global behavior of the overall system must be considered. Thus, indirect adaptive scheme might result in needless responses. Discrete-time variable structure controllers for a well-known logistic map are designed for two deferent sliding hyperplanes. Impulse disturbances are fully rejected by tile virtue of discrete-time variable structure control(DVSC). A numerical example is given to illustrate the effectless of the DVSC.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1617-1620
• /
• 2005

The current control for interior permanent magnet machines is more complicate than surface permanent magnet machine because of its torque characteristic depending on the reluctance. For high performance torque control, it requires state decoupling between the d-current and q-current dynamics. However the variation of the inductances, which couples the state dynamics of the currents, makes the state decoupling difficult. So some decoupling methods have developed to cope this variations and each current can be regulated independently. This paper presents a novel approach for fully decoupling the states cross-coupling using parameter adaptation. The adaptation method is based on the error between reference currents and the currents with state decoupling which have to follow the references. This method is more object-oriented than the other online parameter estimation methods in IPM machine and other electrical machines

• 국제초고층학회논문집
• /
• 제8권2호
• /
• pp.117-123
• /
• 2019

Tall buildings are prone to wind-induced vibrations due to their slenderness whereby peak structural accelerations may be higher than the recommended maximum value. The common countermeasure is the installation of a tuned mass damper (TMD) near the highest occupied floor. Due to the extremely large modal mass of tall buildings and because of the narrow to broad band type of wind excitation the TMD mass may become inacceptable large - in extreme cases up to 2000 metric tons. It is therefore a need to develop more efficient TMD concepts which provide the same damping to the building but with reduced mass. The adaptive TMD concept described in this paper represents a solution to this problem. Frequency and damping of the adaptive TMD are controlled in real-time by semi-active oil dampers according to the actual structural acceleration. The resulting enhanced TMD efficiency allows reducing its mass by up to 20% compared to the classical passive TMD. The adaptive TMD system is fully fail-safe thanks to a smart valve system of the semi-active oil dampers. In contrast to active TMD solutions the adaptive TMD is unconditionally stable and its power consumption on the order of 1 kW is negligible small as controllable oil dampers are semi-active devices. The adaptive TMD with reduced mass, stable behavior and lowest power consumption is therefore a preferable and cost saving damping tool for tall buildings.

• 한국기계연구소 소보
• /
• 통권19호
• /
• pp.125-139
• /
• 1989

As an adaptive control function generator, the CMAC (Cerebellar Model Arithmetic or Articulated Controller) based learning control has drawn a great attention to realize a rather robust real-time manipulator control under the various uncertainties. There remain, however, inherent problems to be solved in the CMAC application to robot motion control or perception of sensory information. To apply the CMAC to the various unmodeled or modeled systems more efficiently, it is necessary to analyze the effects of the CMAC control parameters on the trained net. Although the CMAC control parameters such as size of the quantizing block, learning gain, input offset, and ranges of input variables play a key role in the learning performance and system memory requirement, these have not been fully investigated yet. These parameters should be determined, of course, considering the shape of the desired function to be trained and learning algorithms applied. In this paper, the interrelation of these parameters with learning performance is investigated under the basic learning schemes presented by authors. Since an analytic approach only seems to be very difficult and even impossible for this purpose, various simulations have been performed with pre specified functions and their results were analyzed. A general step following design guide was set up according to the various simulation results.

• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.336-343
• /
• 1995

적응제어의 한 방식인 자기동조제어(STR) 방식이 비선형 노심 모델의 출력 조정에 적용된다. 적응제어는 비선형, 시변 및 확률(Stochastic) 시스템을 위한 준최적 제어기를 설계하기 위한 적절한 제어 방식이다. 제어계통은 미지의 시변 파라메타를 갖는 3차 선형 모델에 기초한다. 파라메타는 가변 망각계수를 도입한 늑장 최소자승법에 의하여 매시간(Time Step) 순환적으로 평가된다. 평가된 파라메타를 이용하여 한 스텝 먼저 냉자재 평균온도가 예측되고 이 예측된 값과 Setpoint 값과의 차이를 최소화함은 물론, 제어봉의 움직임을 막고자 가중(Weighted) One-step-ahead 제어기가 설계된다. 또한 적분동작이 첨가되어 정상상태 에러가 제거된다. 넓은 운전영역을 포괄하는 비선형 PWR 모델이 원자로 출력 조정을 위한 본 제어기를 시뮬레이션하는데 이용되었다. 시뮬레이션 결과로부터 본 제어기의 성능이 우수한 것으로 판명되었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.336-341
• /
• 2002

Recent developments in sensor hardware and in advanced software have made it feasible to consider automating some of the most difficult welding operations. This paper describes some techniques used to automate successfully multipass submerged arc welding operations typically used in pressure vessel manufacture, shipbuilding, production of offshore structures and in pipe mills.

• 대한전자공학회논문지TC
• /
• 제44권1호
• /
• pp.32-37
• /
• 2007

고효율과 고선형성을 갖는 DMB CMOS 전력증폭기가 제안되어 있다. 이 논문에서는 0.13-um 표준 CMOS 공정이 적용되어졌고 제안된 전력증폭기의 모든 구성 소자는 출력 정합 회로망과 적응형 바이어스 조절 회로를 포함하여 하나의 칩속에 완전히 집적되어졌다. 효율과 선형성을 동시에 개선시키기 위하여 적응형 바이어스 조절 회로가 드레인 노드에 위치한 2차 고조파 종단 회로와 함께 적용되어졌다. 전력증폭기는 각각 16.64 dBm의 $P_{1dB}$, 38.31 %의 효율 (PAE), 그리고 24.64 dB의 출력 이득을 보였다. 3차 혼변조왜곡 (IMD3)과 5차 혼변조왜곡 (IMD5)은 각각 -24.122 dBc, -37.156 dBc 이다.