• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.745-750
• /
• 2017

Tension tests for copper thin films with thickness of $12{\mu}m$ were performed by using a digital image correlation method based on consecutive digital images. When calculating deformation using digital image correlation, a large deformation causes errors in the calculated result. In this study, the calculation procedure was improved to reduce the error, so that the full field deformation and the strain of the specimen could be accurately and directly measured on its surface. From the calculated result, it can be seen that the strain distribution is not uniform and its variation is severe, unlike the distribution in a common bulk specimen. This might result from the surface roughness introduced in the films during the fabrication process by electro-deposition.

• Journal of Veterinary Science
• /
• v.22 no.2
• /
• pp.27.1-27.13
• /
• 2021

Background: Ozone is an antimicrobial agent that in experimental and case-control studies has been found to exert a positive effect on wound healing. Wild and pet chelonians frequently present insidious wounds exhibiting secondary infections and/or delayed healing. Objectives: Evaluate the effects of topical ozonated sunflower oil on second-intention healing of acute experimental skin wounds in red-eared sliders (Trachemys scripta elegans). Methods: Randomised within-subject controlled study; Group 1 (n = 24) was used to assess clinical healing features; Group 2 (n = 12) was used for histological evaluation in which two sets of wounds were biopsied at 2, 7, 14, 21, 28 and 42 days over the course of the cicatrisation process. A single 6 mm diameter wound was made on each rear limb and topical ozonated (950 peroxide value) and non-ozonated sunflower oil were applied daily for one week on treated and contralateral control wounds, respectively. Results: Mean wound size was significantly lower in the ozone-treated group at day 28 (p < 0.0001) with differences of clinical relevance (74.04% vs. 93.05% reduction of initial wound size). Histologically, the acute inflammatory reaction was enhanced in treated wounds, with significantly higher numbers of heterophils (p = 0.0016), lymphocytes (p < 0.001) and fibroblasts (p < 0.001). Conclusions: Daily topical application of ozonated sunflower oil over the course of one week improved the healing of acute, full-thickness skin wounds in chelonians. This clinical outcome was histologically correlated with an enhanced acute inflammatory reaction, as well as the production and remodelling of collagen fibres.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.567-574
• /
• 2021

In this study, we evaluated the wound healing rate and, inflammatory cells effects of by Abeliophyllum distichum Nakai (ADN) extract in mice. We also assessed the stability of the ADN extract upon exposure to sunlight. Treatments were as follows: 1) CON (only saline solution), T1 (CON + 0.0125% ADN extract), T2 (CON + 0.05% ADN extract), and T3 (CON + 0.5% ADN extract). A 4 mm punch was used in the central part of the dorsal area to separate it from the subcutaneous tissue, causing a full-thickness skin wound. An amount of 1 mL of each sample was sprayed onto the treatment section of the wound with a pipette every day from the day of wound creation, with proper application ensured using brush. In the stability test, the pH was measured at 1, 4, and 8 weeks after exposing the samples of each treatment section to sunlight considering, the higher concentrations of the ADN extract. The results of this study indicate that the effectiveness of the wound contraction rate in the mice to which the ADN extract was applied was low. Moreover, the stability of the sample containing a high concentration of the ADN extract could not be verified. In addition, no significant results were obtained in the inflammatory reaction assessment. Therefore, additional research focusing on wound contraction, stability, and inflammatory cell outcomes of the ADN extract is needed.

• International Neurourology Journal
• /
• v.22 no.4
• /
• pp.246-251
• /
• 2018

Purpose: To determine whether responses to serotonin are altered in bladder strips from cats diagnosed with a naturally occurring form of bladder pain syndrome/interstitial cystitis termed feline interstitial cystitis (FIC). Methods: Full thickness bladder strips were isolated from aged matched healthy control cats and cats with clinically verified FIC. Bladder strips were mounted in an organ bath and connected to a tension transducer to record contractile activity. A serotonin dose response ($0.01-10{\mu}M$) was determined for each strip with the mucosa intact or denuded. Results: Bladder strips from control and FIC cats contracted in response to serotonin in a dose-dependent manner. The normalized force of serotonin-evoked contractions was significantly greater in bladder strips from cats with FIC (n=7) than from control cats (n=4). Removal of the mucosa significantly decreased serotonin-mediated responses in both control and FIC bladder preparations. Furthermore, the contractions in response to serotonin were abolished by $1{\mu}M$ atropine in both control and FIC bladder strips. Conclusions: The effect of serotonin on contractile force, but not sensitivity, was potentiated in bladder strips from cats with FIC, and was dependent upon the presence of the mucosa in control and FIC groups. As atropine inhibited these effects of serotonin, we hypothesize that, serotonin enhances acetylcholine release from the mucosa of FIC cat bladder strips, which could account for the increased force generated. In summary, FIC augments the responsiveness of bladder to serotonin, which may contribute to the symptoms associated with this chronic condition.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.1
• /
• pp.50-60
• /
• 2019

Recently, problems with excessive vibration of the radar masts of large bulk carriers and crude oil tankers have frequently been reported. This paper explores a design method to avoid the resonance of a radar mast installed on a large ship using various design of experiment (DOE) methods. A local vibration test was performed during an actual sea trial to determine the excitation sources of the vibration related to the resonant frequency of the radar mast. DOE methods such as the orthogonal array (OA) and Latin hypercube design (LHD) methods were used to analyze the Pareto effects on the radar mast vibration. In these DOE methods, the main vibration performances such as the natural frequency and weight of the radar mast were set as responses, while the shape and thickness of the main structural members of the radar mast were set as design factors. From the DOE-based Pareto effect results, we selected the significant structural members with the greatest influence on the vibration characteristics of the radar mast. Full factorial design (FFD) was applied to verify the Pareto effect results of the OA and LHD methods. The design of the main structural members of the radar mast to avoid resonance was reviewed, and a normal mode analysis was performed for each design using the finite element method. Based on the results of this normal mode analysis, we selected a design case that could avoid the resonance from the major excitation sources. In addition, a modal test was performed on the determined design to verify the normal mode analysis results.

• Archives of Craniofacial Surgery
• /
• v.19 no.4
• /
• pp.254-259
• /
• 2018

Background: The esthetic and functional outcomes of periorbital defect reconstruction are very important because of the complex anatomy and specialized functions of this region. The orbicularis oculi myocutaneous (OOMC) flap is useful for the reconstruction of periorbital defects. But, according to the location and depth of the defects, the reconstruction using OMC flaps with various techniques is rare. The authors have used various kinds of OOMC flaps in various situations and we present an analysis of our experiences. Methods: From November 2001 to July 2017, we used 36 OOMC flaps to reconstruct 30 periorbital defects in 25 patients. We analyzed the cause of the defect, its location, the type of concomitant surgery, the method of flap movement, and complications. Results: Of the 30 defects, basal cell carcinoma was the most common cause, accounting for 20 cases. When the used OOMC flap was classified according to the location of the defects, the switch flap was used in nine cases among 15 defects of lower eyelid, and the V-Y advancement flap was mainly used for other parts. As surgical methods according to the depth of defect were classified, all cases involving the tarsal plate were reconstructed with a composite graft. In case of skin and muscles, they were reconstructed only with OOMC flap or with full-thickness skin graft. Conclusion: The OOMC flap provides good skin quality that is very similar to that of the defect tissue. Depending on the location and depth of the defect, the OOMC flap may be used properly in a variety of ways to achieve good results.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.497-504
• /
• 2018

Platform Support Vessels operated in the Arctic Ocean support diverse operations of offshore plant in the sea, and the PSV is also needed to support works to exploit the oil and gas in the Arctic Ocean. Both of the ice breaking and the open sea performance have been considered together to secure the enhanced operational performance at the harsh environment in the Arctic Ocean and the open sea as well. In this study, One of the design requirements of a PSV is to guarantee continuous icebreaking performance with 3 knots at 1 m thickness of level ice, where the design draft is 7.5m and the engine power is 13 MW. Three hull forms were designed, and the ice resistance based on empirical formulas was estimated to select the initial hull form having an outstanding performance. The full scale performance of the designed hull forms was predicted by the ice model test conducted in the ice model basin of Korea Research Institute of Ships & Ocean Engineering(KRISO). The analysed results show that the selected hull form satisfies the above design requirement.

• Computers and Concrete
• /
• v.24 no.2
• /
• pp.159-172
• /
• 2019

This paper presents an investigation into the flexural behavior of reinforced concrete (RC) beams retrofitted by ultra-high performance fiber-reinforced concrete (UHPFRC) layers. The experimental study has been conducted in two parts. In the first part, four methods of retrofitting with UHPFRC layers in both the up and down sides of the beams have been proposed and their efficiency in the bonding of the normal concrete and ultra-high performance fiber-reinforced concrete has been discussed. The results showed that using the grooving method and the pre-casted UHPFRC layers in comparison with the sandblasting method and the cast-in-place UHPFRC layers leads to increase the load carrying capacity and the energy absorption capacity and causes high bond strength between two concretes. In the second part of the experimental study, the tests have been conducted on the beams with single UHPFRC layer in the down side and in the up side, using the effective retrofitting method chosen from the first part. The results are compared with those of non-retrofitted beam and the results of the first part of experimental study. The results showed that the retrofitted beam with two UHPFRC layers in the up and down sides has the highest energy absorption and load carrying capacity. A finite element analysis was applied to prediction the flexural behavior of the composite beams. A good agreement was achieved between the finite element and experimental results. Finally, a parametric study was carried out on full-scale retrofitted beams. The results indicated that in all retrofitted beams with UHPFRC in single and two sides, increasing of the UHPFRC layer thickness causes the load carrying capacity to be increased. Also, increases of the normal concrete compressive strength improved the cracking load of the beams.

• Archives of Plastic Surgery
• /
• v.46 no.2
• /
• pp.129-134
• /
• 2019

Background Nipple-areolar complex (NAC) reconstruction is the final stage of breast reconstruction. Ideal reconstruction of the NAC requires symmetry in position, size, shape, texture, pigmentation, and permanent projection, and although many technical descriptions of NAC reconstruction exist in the medical literature, there is no gold standard technique. The technique devised by the authors is very versatile, with excellent results, and it enables 1-step reconstruction with optimal results in terms of shape and nipple projection. Methods Our technique consists of a combination of modified local flaps and a full-thickness skin graft. Patients were observed for 18 months to estimate the amount of retraction. This procedure was performed in 40 patients, four of them bilaterally. The duration of the follow-up was 30 months. Complications occurred in 10% of patients, and included infections (5%), ischemia (2.5%), and hematoma (2.5%). Results No cases of total nipple necrosis were reported. The NAC shape remained optimal in all cases, with a very small reduction of the vertical and horizontal diameters of the areola, which maintained its designed round shape well, and negligible retraction in the diameter and projection of the nipple. Conclusions The oval technique represents a major step forward, involving a combination of existing techniques, such as the C-V flap and the cutaneous graft, to achieve excellent results regarding areola shape and nipple projection, significantly reducing the cases of nipple ischemia. These results were substantially obtained through subcutaneous equatorial sutures, skin grafting, and flattening of the apexes of the flap.

• Journal of Periodontal and Implant Science
• /
• v.48 no.6
• /
• pp.395-404
• /
• 2018

Purpose: The purpose of this study was to propose a technique for periodontal biotype modification through thickening of the entire facial aspect using a volume-stable collagen matrix and autogenous subepithelial connective tissue graft (CTG) for the treatment of gingival recession. Methods: Four systemically healthy patients showing Miller class I or class II gingival recession in the mandibular incisor area were included in this study. Full-mouth scaling and root planing procedures were performed at least 4 weeks prior to periodontal plastic surgery. A split-thickness flap with a horizontal intrasulcular incision and 2 vertical incisions was used in cases 1-3, and the modified tunnel technique was used in case 4 for coronal advancement of the mucogingival complex. After the exposed root surfaces were debrided thoroughly, double-layered volume-stable collagen matrix was placed on the apical part of the recession and a subepithelial CTG harvested from the palatal area was placed on the coronal part. The amount of root coverage at 3 months postoperatively was evaluated in cases 1-3, and facio-lingual volumetric changes were analyzed in cases 1 and 2. Results: Healing was uneventful in all 4 cases and complete root coverage was shown in cases 1-3. In case 4, reduction of gingival recession was observed at 3 months after surgery. In cases 1 and 2, a comparison of stereolithographic files from the preoperative and postoperative time points demonstrated that the entire facio-lingual volume had increased. Conclusions: The surgical technique suggested herein, using a volume-stable collagen matrix and autogenous subepithelial CTG, may be an effective method for periodontal biotype modification through thickening of the entire facial aspect for the treatment of gingival recession.