• Journal of Mechanical Science and Technology
• /
• 제14권1호
• /
• pp.48-56
• /
• 2000

The bifurcation problem of thin walled structures in contact with rigid surfaces is formulated by adopting the multiple scales asymptotic technique. The general theory developed in this paper is very useful for the bifurcation analysis of waviness instabilities in the sheet metal forming. The formulation is presented in a full Lagrangian formulation. Through this general formulation, the bifurcation functional is derived within an error of O($(E^4)$) (E: shell's thickness parameter). This functional can be used in numerical solutions to sheet metal forming instability problem.

• Clinics in Shoulder and Elbow
• /
• 제21권2호
• /
• pp.101-104
• /
• 2018

Since shoulder have a higher proportion of muscle which would have low electrical resistance, there could be more electrical damage to the rotator cuff muscles. We present a patient with acute rotator cuff tear by sudden uncontrolled jerking contractions caused by an electrical shock. A case of 42-year-old man with acute rotator cuff tear due to electrical injury to the shoulder was presented. Magnetic resonance imaging showed a full thickness tear and an undulating appearance of the peripheral end of the torn supraspinatus and infraspinatus muscle, suggesting an acute complete rupture. By arthroscopic surgery, the torn rotator cuff tendons were repaired with a suture bridge technique. At the final follow-up, the patient had a full, pain-free range of motion and had fully recovered shoulder muscle power.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.53-58
• /
• 2000

During the curing process of thick glass/epoxy laminates, a substantial amount of temperature lag and overshoot at the center of the laminates is usually experienced due to the large thickness and low thermal conductivity of the glass/epoxy composites. Also, it requires a longer time for full and uniform consolidation. In this work, temperature, degree of cure and consolidation of a 20mm thick unidirectional glass/epoxy laminate were investigated using an experiment and a 3-dimentional numerical analysis considering the exothermic reaction. From the experimental and numerical results, it was found that the experimentally obtained temperature profile agreed well with the numerical one and the cure cycle recommended by the prepreg manufacturer should be modified to prevent a temperature overshoot and to obtain full consolidation.

• Tribology and Lubricants
• /
• 제23권3호
• /
• pp.95-102
• /
• 2007

In recently designed diesel engines, the running conditions for piston pin bearings have become very severe due to combustion pressure and temperature increase. Moreover, the lead removal from the bush material has strongly reduced the capability of the anti friction material to accept asperity contacts. In this paper, before trying to find the pressure distributions on the oil film of piston pin bearings by the unsteady two dimensional thermohydrodynamic lubrication analysis in order to do the optimum design of the bearings of piston pin, it will be investigated the tendancy of piston pin rotating motion by calculating the friction coefficient at piston pin bearings, the oil film thickness and the frictional torques induced by hydrodynamic shear stress.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2853-2865
• /
• 2000

During the curing process of thick glass/epoxy laminates, a substantial amount of temperature lag and overshoot at the center of the laminates is usually experienced due to the large thickness and low thermal conductivity of the glass/epoxy composites. Also, it takes a longer time for full and uniform consolidation. In this work, temperature, degree of cure and consolidation of a 20 mm thick unidirectional glass/epoxy laminate were investigated using an experiment and a 3-dimentional numerical analysis. From the experimental and numerical results, it was found that the experimentally obtained temperature profile agreed well with the numerical one, and the cure cycle recommended by the prepreg manufacturer should be modified to prevent a temperature overshoot and to obtain full consolidation.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.174-179
• /
• 2016

In this paper, a novel full-aperture reflective null measuring method is proposed to detect the transmission wavefront of a conformal dome surface. An aspheric compensator is designed and placed behind the dome to reflect the aspheric testing wave back to the same path. To ensure the feasibility of this method, tolerance analysis is conducted, and guidance to assembly is given accordingly. The accuracy of this method is verified to be λ/30 (λ =3.39 μm) by Monte Carlo algorithm. In addition, the influence of different error factors, including the thickness error and decenter error of the dome, on the testing wavefront is analyzed. Simulation and experiment indicate that this method is practical and simple, and can measure the conformal domes precisely and comprehensively.

• Tribology and Lubricants
• /
• 제29권4호
• /
• pp.228-234
• /
• 2013

This paper presents analysis of elastohydrodynamic lubrication (EHL) of ball bearings, in which surface roughness is considered. A lot of time is required to obtain a solution in the case of EHL analysis where surface roughness is considered, because the analysis requires a variety of analytic nodes. To save time, we use the full approximation scheme (FAS) among multilevel methods. We analyze the results of EHL and contact analyses in terms of pressure. We also compare the results for smooth and rough surfaces with respect to film thickness. We confirm that the film pressure decreases as compared to contact pressure because of the presence of lubricants between the ball and the raceway. Furthermore, in the case when surface roughness is considered, the film pressure increases because of contact asperities. Therefore, surface roughness should be considered when designing ball bearings.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.401-406
• /
• 2011

The abnormal vibration from the BTV(Brake Torque Variation) and DTV(Disc Thickness Variation) is transferred to the suspension and steering system during braking. In this paper, judder simulation is carried out using multi-body dynamic analysis program to analyze the relation of the judder and transfer mechanism which is composed of the suspension and steering system. In order to analyze the brake judder transfer system, the full vehicle model was composed with rigid body, non-linear bushing, non-linear constraints and joints. Full vehicle model analysis was compared by actual vehicle judder test and sensitivity analysis of the suspension system is carried out.

• KSTLE International Journal
• /
• 제7권2호
• /
• pp.45-50
• /
• 2006

In this paper, the leakage safety of prestressed concrete structure including the insulation panels has been analyzed using a finite element analysis just after a collapse of 9% nickel inner tank. This FEM study shows that the outer tank may contain the leaked cryogenic liquid for the time being until the primary pump in the inner tank transports stored cryogenic liquids to the nearest LNG storage tank before the outer tank is demolished. This means that the total tank thickness from the insulation panel to the outer tank system safely may retain the leaked cryogenic fluids. The FE computed results indicate that the current structure in a full containment tank is obviously enough to securing the leak-proof safety of the tank system with two primary pumps.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2142-2153
• /
• 1995

A digital preview controller using optimal LQ control theory is suggested for tandem cold mills to achieve a remarkable improvement of the thickness accuracy. Optimal preview control system is constructed for each rolling stand of tandem cold mills for which the blocked noninteracting control is carried out, and it is compared with the optimal LQ control system which has only feedback control. And in the cases that all/some of disturbance inputs are previewable, full and partial preview controllers are designed, and their performance effects are compared and discussed. The simulation results show that the performance of tandem cold mills can be improved largely through partial preview control.