• 자원환경지질
• /
• 제46권1호
• /
• pp.1-9
• /
• 2013

본 연구에서는 배경값 보정 및 크기보정을 포함하여 오차요인을 크게 줄이고, WILDFIRE(C)를 통해 최적화된 이론값과 실측값의 일치정도 (R%, (${\sum}$|이론값-측정값|/이론값)/$n{\times}100$)를 정량값으로 제시하고, 그 값을 최소화하는 반복과정을 통해 일라이트 폴리타입 함량을 정량하는 개선된 full-pattern-fitting법을 제안하여 일정 함량을 갖는 혼합시료를 대상으로 검증하고, 기존의 Grathoff and Moore법과 비교하였다. 개선된 full-pattern-fitting법은 대상시료 내 불순물로 인한 각 폴리타입 함량오차에도 불구하고, 기존의 full-pattern-fitting법 보다 개선된 최대 3.6% 이내의 오차를 보였다. Grathoff and Moore법과의 비교에서 대상시료 모두에서 Grathoff and Moore법 적용결과는 $2M_1$ 폴리타입의 상대함량이 고평가되어 나타났으며, 이용한 피크별 매우 큰 정량값 차이를 보이는 반면, 본 연구의 개선된 full-pattern-fitting법 적용 결과는 10% 이내의 낮은 R% 값을 갖는 폴리타입 상대함량값을 보이는 것으로 나타나, 높은 신뢰도의 정량결과를 제공할 수 있음을 확인하였다.

• 한국의류학회지
• /
• 제25권4호
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• 한국생활과학회지
• /
• 제17권1호
• /
• pp.115-126
• /
• 2008

The construction of an athlete's tight-fitting garments is very important to the wearer in terms of athletic performance. Therefore pattern development of tight-fitting garments must allow for the full range of human movement and postures. In this study the relationship between the construction of a skate pants pattern and clothing fitting was explored with the aim of improving the comfort of the clothing. The four male subjects were university students between the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on four consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Results showed differences in the front-rise length and back-rise length between basic pants(A) and modified pants(B,C,D) were -5.16cm and +5.64cm. Comparing the basic pants pattern(A) with modified pants pattern(B), the latter was superior to basic pants(A) in terms of pressure sensation and closeness of fit, but there was no significant difference. Among the four tight-fitting skate pants, A and B pants were superior to the others in terms of fitting and stability of waist and hip sections. In the case of the skate pants, the number of cutting lines in the pattern had an influence on clothing comfort. A minimum cutting line for tight skate pants was better than a maximum cutting line in terms of clothing comfort.

• 패션비즈니스
• /
• 제12권1호
• /
• pp.109-119
• /
• 2008

The purpose of this study is to dvelop the basic pattern of wome which are fitting for 75A. The collected data were statistcally processed usig the SPSS 10.0 for Mans Standard Deiation, Cronbach's $\alpha$, etc. This study suggested a size chart for body measurement for constructing basic brssiere patterns with size of 75A. The construction of this experimental brassiere were lower cup, upper cup, front panel and wing and characterized by a round cup wired as well as a full cup embrcing the entire breasts. The drafting method for constructing basic brassiere patterns for 75A was completed by selecting a total of 11subjects, and two wearing tests were carried out with the subjects. the dimensions and shapes of the basic brassiere pattern suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

• 한국생활과학회지
• /
• 제18권2호
• /
• pp.397-406
• /
• 2009

A Study on the Development of Brassiere Pattern for Elderly Women The purpose of this study is to develop functional and sensible brassiere for elderly women. For this purpose, 6 elderly women(aged between 65 and 69) were sampled to be measured for their body sizes and tested for their bressiere wearing. he results were as follows; 1. In order to develop the basic patterns of elderly women's bressieres, 90B size was selected and then, their bressiere fitting was tested. The foundation pattern of the size 90A was proved for the body by the wearing tests. Each angle and length of the parts on the basic line of the breasts played an important role on setting the pattern. 2. As based on the body surface shell extracted from a plastic mold(photo.2), the cup of brassiere pattern were applied to the body surface shell(photo.4), and full side stretch-wings were applied to 13% reduced body size. The design pattern of elderly women's brassiers were characterized by a round wired as well as a full cup(3piece) embracing the entire breasts. 3. As the result of the wearing test, the excellence of the experimental brassiere was recognized objectively, with high marks in all the items(fig. 6). The experimental brassiere was covering the whole breasts to cope with change according to breasts loosing. It was designed to support the breasts firmly.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.81-92
• /
• 2008

The purpose of this study is to develop the applied brassiere pattern of women which are fitting for 75A. The constructing of this experimental brassiere were lower cup, upper cup, front panel and U-wing as well as a full cup embcing the entire breasts. Basing on the bra model from domestic experiment results, development of an applied design, round side type pattern, has been suggested. Thus, suggesting the round variation design bra, which is an applied design based on the basic model based on the breast volume. Based on the sizes that are in reference to Size Korea (2004) and related previous researches, the basic model that has been experimented with 11.4% polyurethane and 88.6% Nylon as the materials, has been selected as the model of research. This takes 75A, the size of which is set according to the underbust circumference and the breasts circumference, as the basic model. It is an application in terms of design, and there is no change to the cup volume or size because it has been moved only from the cutting line. The applied design changes the right side of the lower cup into an easily-movable form and attaches it to the upper cup, and the lower cup takes the right part of the upper cup to form a cup shape of round variation design. It also changes basic straight form of the wings, and alters them into U-shape.

• 대한가정학회지
• /
• 제43권5호
• /
• pp.235-248
• /
• 2005

The objective of the study was to design a Battle Dress Uniform(BDU with improved motional flexibility, body fit, and protectiveness to cope with the special operational environment of the subjects. For this purpose, the researcher conducted a questionnaire survey on 92 male members of Special Weapon Attack Team(SWAT units in a former study, and based on the results of the survey, made the two-piece and one- piece BDU samples to overcome the identified problems and inconveniences. The sample uniforms were designed ergonomically from five aspects. Subsequentlv, the new BDU was compared with the current operational uniform in terms of outward appearance(design and fit), motional flexibility, and suitability for field activities. The samples were evaluated by 5 SWAT members as subjects and 8 graduate school students majoring in clothing and textiles as experts. According to the results, the two-piece and one-piece samples gained higher scores than the existing operational uniform in terms of outward appearance(design and fitness) and motional flexibility, and the one-piece sample was preferred with regard to fit when worn by the subjects with their full kit for field operations. That is, the one-piece sample appeared to be more suited to the special work environment of SWAT and to be more functional in terms of ease of putting on and taking off, motional flexibility, body fit and protectiveness than the current operational uniform(two-piece type).

• 한국의류산업학회지
• /
• 제17권3호
• /
• pp.429-439
• /
• 2015

This study develops a new brassiere for new silver women. A new brassiere design was developed for the silver generation based on apreliminary survey; subsequently, a wire and no-wire type of brassier were developed after a second fitting evaluation. The results were as follows. First, in terms of brassiere design, the cup shape was designed as mold type full cup, shoulder straps were designed as camisole type with cups, bias tape was designed for body correction in the side line and mash tape was designed for easy movement below the cups. On the other side ofthe cup shape was a pocketdesigned on a support pad forthe wire type and a support panel to serve as a wire in the no-wire type brassiere. Second, brassiere patterns were designed by referencing the educational H pattern. Thetotal length was elongated by 5cmto reduce pressure when wearing a brassiere and the height of the front center increased by 8cm for the stability of the front center of the brassiere. In addition, the side line was moved back by 3cm and the width of the brassiere wings was designed widely at 10.5cm. Third, a wearing test was conducted for the wire type and the no-wire type brassiere with comparison products, using a 7-point Likert scale. Appearance results and movement tests for the wire and no-wire type showed a higher score than comparison products.

• The International Journal of Costume Culture
• /
• 제12권1호
• /
• pp.71-84
• /
• 2009

For fit satisfaction evaluation, the subjects were asked to put on the jackets from the seven manufacturers in random order, view how the jackets fit in a full-body mirror and answer questions regarding fitting in 22 specific areas, including the neck, shoulders, waist, hips and arms, as well as eight questions related to maneuverability. The surveys and evaluations were conducted between October 2007 and November 2008, and the compiled data were analyzed using the SPSS 14.0 statistics program. The One-way analysis of variance was performed to comparatively analyze the differences among the products from the seven manufacturers. Post-hoc tests were performed based on Duncan's test for the criteria that displayed significant differences. The results were summarized as follows. Fit evaluations were performed for the size 88 formal jackets from the seven manufacturers. All items, except the center front line, displayed significant differences at p<0.05 or higher among the manufacturers. The age group 20-39 felt that the main problems were in the shoulder, armscye, upper arm, waist, abdomen and hip areas. Modifying the shoulder area, armscye depth and hip areas severely compromises the jacket's balance, and attention to these areas must be given developed pattern design.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.