• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.128-140
• /
• 2006

In the IEEE 802.16 Wireless MAN standard specifies the air interface of fixed point-to-multipoint broadband wireless access systems providing multiple services. Among the service classes supported between the base station and subscriber stations in the wireless MAN, the best effort service class is ranked on the lowest position in priority and is assisted by a MAC scheme based on reservation ALOHA. The wireless MAN standard, however, does not reveal every detail of the MAC scheme but only describes the skeleton of the MAC scheme. Focusing on the amount of resource that a subscriber demands by a request and the amount of resource that the base grants to a request we thus present a number of resource demand rules and resource grant rules. Also, we construct a candidate MAC scheme by implanting a pair of resource demand and grant rules into the skeleton of the MAC scheme. Meanwhile a difficult situation for the best effort service is expected wherein only scarce resource is available after most of the resource is already preempted by other services. Perceiving such a situation, we evaluate the throughput and delay performance of each candidate MAC scheme. Especially we develop an analytical method to approximately calculate the throughput in the saturated environment. From the numerical results, we observe that the candidate MAC scheme which adopts the non-gated exhaustive demand rule paired with the full grant rule attains superior performance at the expense of the fairness.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.15-22
• /
• 2006

In this paper, 1.8V 8-bit 500MSPS Low-power CMOS Digital-to-Analog Converter(DAC) for UWB(Ultra Wide Band) Communication Systeme is proposed. The architecture of the DAC is based on a current steering 6+2 full matrix type which has low glitch and high linearity. In order to achieve a high speed and good performance, a current cell with a high output impedance and wide swing output range is designed. Further a thermometer decoder with same delay time and low-power switching decoder for high efficiency performance are proposed. The proposed DAC was implemented with TSMC 0.18um 1-poly 6-metal N-well CMOS technology. The measured SFDR was 49dB when the output frequency was 50MHz at 500MS/s sampling frequency. The measured INL and DNL were 0.9LSB and 0.3LSB respectively. The DAC power dissipation was 20mW and the effective chip area was $0.63mm^2$.

• Journal of Industrial Convergence
• /
• v.18 no.3
• /
• pp.91-98
• /
• 2020

The purpose of this study was to identify differences in records for each section of the wheelchair marathon and to provide information necessary for training and basic data for developing training methods. The subjects of this study were analyzed for the records of a total of 5 foreign male athletes and 4 domestic top athletes who completed the 42.195km full course among the participants at the 2016 Seoul International Wheelchair Marathon. Every 5km section records and finish records were used, and the first section to the ninth section were set. As for the data processing method, descriptive statistics (Mean, SD) were used using the statistical program SPSS 25.0. The following conclusions were drawn according to the above research methods and procedures. In the case of the winning W1 athletes, the record at 30km to 35km was the fastest 8 minutes and 43 seconds in the entire section, and the difference was 1 minute and 4 seconds compared to the K1 athletes of the nation's No. 1 athletes. In order to be ranked higher in international competitions, training to adapt to a quick pace at a later stage is required. That is, it was found that the second half face should be faster based on the half distance. In addition, in each section of the first half, it is necessary to develop a race pace suitable for the average speed level for each individual section. Therefore, it is considered that the fitness training program that can maintain the early race and the training program that can cope with changes in pace after the second half should be applied.

• Journal of Service Research and Studies
• /
• v.7 no.1
• /
• pp.65-82
• /
• 2017

This study is to examine the effects of high commitment HRM on service performance in the service industry, and to examine the mediating effect of the organizational internal innovation direction. Specifically, the direction of internal innovation consists of high-value-added HR and service and cost-reduction downsizing. We assumed that the high-value-added direction of HR and service will have a positive mediating effect. And assumed that cost-reduction downsizing direction has negative mediating effect. The data were collected from 2013 workplace panel survey(WPS) of the Korea Labor Institute(KLI). Among the 1,775 companies, 896 companies classified as wholesale and retail, transportation, professional scientific services, education services, health social services, financial services, and other services (such as information society support services) were extracted and used. In summary, high-commitment HRM has a positively significant effect on the direction of high value-added innovation of HR and services, and has a negatively significant effect on the cost-reduction downsizing direction. In addition, the direction of high value-added innovation of HR and service was positive effect on service performance, and cost-reduction downsizing innovation direction has a negative effect on service performance. And the direct effect of high commitment HRM on service performance has not been confirmed. However, we confirmed the positive mediating effect of high value-added innovation direction of HR and services, and confirmed that the negative mediating effect of cost-reduction downsizing. Therefore, it is confirmed that the two variables have a full mediating effect on the relationship between high commitment HRM and service performance.

• Journal of Arbitration Studies
• /
• v.21 no.3
• /
• pp.89-114
• /
• 2011

Environmental disputes not only possess the special characteristics of collectivity and plural value relativity but it also possesses the unique features of difficulty to prove cause and effect as well as the structural maldistribution of evidence and information. Therefore, the positive resolution of an environmental dispute can be brought about more easily with the Alternative Dispute Resolution (ADR) which can take the form of talks, compromises, as well as arbitration or mediation rather than through a trial process. Such being the case, this paper first looks into the problems and effectiveness of the arbitration system of environmental lawsuits and then takes an even closer look at Korea's environmental dispute arbitration system and finally offer some reform methods. In Korea, the environmental dispute arbitration system was implemented in 1991 and has been executed since then. Although this system does have positive features such as the high rate of coming to an agreement between the involved parties but unfortunately, most of the cases rely on decisions based on right and wrong which cannot but be far away from the intentions of the ADR system. It is heavily centered around claims regarding psychological compensation regarding noise and vibrations and the ratio of the actual amount of compensation is comparatively lower than the requested amount. In addition, with the limits in organization and manpower, it leads to a lack of professionalism as well as the problem of low usage with the low awareness rate. As reform measures against the aforementioned problems, this paper suggests the following. First, in order to activate the arbitration process more fully, it proposes aggressive usage of compulsory arbitration as well as submission to arbitration, while at the same time raising ADR professionals to fill in the missing gaps. Secondly, in order to overcome the problem of concentration of related cases, making representative lawsuits of environmental organizations would be a good idea. It also states that in order to make the compensation amount more realistic, it should go out of the across-the-board decision making process and reach a decision about the compensation amount that takes the individual situation's dispute into consideration. In order to boost the professionalism of the environmental dispute arbitration, it is necessary to reform the organization and manpower such as expanding the number of members of full standing, and increasing the professionalism of the examiners. Also, to increase the usage rate of the ADR system, the paper suggests stationing a civilian consultant regarding environment, or activating the compulsory arbitration which is the premise for public participation on the part of the residents.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.40-40
• /
• 2017

본 연구는 빛의 파장대가 넓어 보다 다양한 접근과 검출이 가능한 초분광 카메라 (VNIR spectral camera PS, SPECIN Filand)를 이용하여 정식시기가 다른 배추를 생육단계별로 영상을 취득한 후 배추 캐노피의 전 파장 (400~1000nm)으로 생육 추정모델을 개발하기 위해 수행하였다. 정식시기가 다른 배추를 생육단계별로 초분광 카메라로 영상을 취득한 후 취득된 영상 ($348{\times}1040$)을 ENVI (ver. 5.2, Exelis Visual Information Solutions, USA) 프로그램을 이용하여 식생지수 NDVI로 작물과 배경을 구분하였다. 배추 캐노피 영역에 전 파장을 산출한 후 반사판 영역의 전 파장을 이용하여 광 보정된 반사율을 산출하였다. 통계 프로그램인 R Project (ver.3.3.3, Development Core Team, Vienna, Austria)를 이용하여 배추의 반사율과 계측한 생육 정보를 PLSR (Partial least squares regression) 분석하여 정확도($R^2$) 및 정밀도 (RMSE [g,cm,count], RE [%])로 나타내었고 그 모델은 full-cross validation (FV) 하여 타당성을 검증하였다. 정식시기가 다른 배추의 모든 생육단계의 생육정보를 이용하여 PLSR (Partial least squares regression) 결과 엽장을 추정한 모델의 $R^2$는 84% 이상의 정확도와 RMSE 3.2cm 이하의 좋은 정밀도를 보였다. 엽폭을 추정한 모델의 $R^2$는 73% 이상의 정확도와 RMSE 3.5cm 이하의 정밀도를 보였고 엽수를 추정한 모델의 $R^2$는 93% 이상의 정확도와 RMSE 6.3Count 이하의 정밀도로 보여 캐노피의 전 파장을 이용해 생육을 추정하는 것이 가능하다고 판단되었으며 이 모델들의 타당성 검증에서도 좋은 정확도와 정밀도를 보였다. 그러나 배추의 중요한 생육인자 중 생체중을 추정한 모델의 $R^2$는 89% 이상으로 정확도가 높았으나 RMSE 571.1g 이하로 낮은 정밀도를 보여 생체중을 정확히 추정하기 어려웠다. 따라서 다른 통계분석방법으로 전 파장과 생육정보를 분석하거나 특정 밴드를 선택하여 산출한 식생지수를 이용한 추정 모델의 개발을 통하여 오차를 개선할 필요가 있다고 사료된다. 추후 반복 실험하여 분석한 추정 모델과 비교 분석하여 다양한 환경 및 생물 조건에 범용성을 가진 모델을 개발할 필요가 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.465-471
• /
• 2005

A method of calculation fur propagating and focusing of focused beams generated in antenna arrays, using BPM(Beam Propagation Method), is presented in this paper. Based on the diffraction theory, the beam focusing and Propagation is studied specially for the case of the antenna way fed by the Rotman lens that is able to focus microwave power on its focal arc or generate multiple beams. There are difficulties in performing a full-wave simulation using a commercial EM simulation tool for propagating and focusing of beams because of the structural complexity and the feeding assignment of the antenna array. Therefore, as an alternative solution, the BPM is presented to calculate the beam propagation from the aperture-type antennas. From the point of view of optics, the propagations of the lens have been simplified from the Fresnel diffraction integral to the Fourier transform. Using Fourier Transform, a beam propagation method is developed to show improvement of the resolution by controlling the wavefront of wave Propagating from an aperture-type antenna array. The beam width(or spot size) and the intensity are calculated for a focused beam propagating from an array having $10\lambda$ of its size. For the beams with $20\lambda,\;30\lambda$, and $50\lambda$ of geometrical focal length, the half-power beam widths(or spot size) are about 1.1\lambda,\;1.3\lambda,\;and\;1.9\lambda$ respectively.

• The Research Journal of the Costume Culture
• /
• v.14 no.5
• /
• pp.790-801
• /
• 2006

This study analyzed features of elements that compose a logo of inner wear brands to get the following results: First, it was found that "elegance" was the most frequently used word to express the concept of inner wear brands to be followed by words like dignity, high-end and aristocratic, words emphasizing femininity, such as feminine, romantic and sexy, words emphasizing practicality, such as convenient, practical, modern, functional and reasonable, and words emphasizing hygiene, such as clean, healthy and hygienic. This suggests that consumers nowadays pursue image more than functional aspects in the shopping of inner wear and consumers' pursuit of such values is reflected in the concept of inner wear brands. Second, unlike logos for outerwear brands that generally used initials of brand name, word-type logos for inner wear brands used the full name of brands, thus suggesting that they put more emphasis on delivery of information rather than on the symbolic aspect. In case of combining characters with concrete objects, they were found generally to use objects that give an soft, elegant and feminine image, such as flowers, woman's head and ribbons. Third, colors in the series of pink and red seemed to be used to convey the concept of inner wear brands that pursue such images as romanticism, femininity, elegance and sensibility, while colors in the series of blue, black and grey for such concepts as functionality, practicality, simplicity, health, hygiene and refinement. With reference to typeface used in the design of logos, unlike outerwear brands of which 83% use sans serif typeface for logos, relatively high percentage of inner wear was found to use typefaces of serif series to stress feminine flexibility and delicacy and give the image of elegance and classical tenderness. With reference to language used in logo naming for inner wear brands, 33 brands were found to use English and only three brands used Korean among the 36 brands surveyed. Even with inner wear brand logos that have Korean name, it was found that they used English in the use of logo marks. Like the result of previous studies, the result of this study indicates that methods to design brand logos for clothing should be incessantly sought in a way to build brand power as an important component to represent concept or function of brands and reinforce brand image.

• Journal of the Korea Concrete Institute
• /
• v.26 no.2
• /
• pp.181-188
• /
• 2014

In this study, an interactive analysis considering column-pile interaction is performed on the basis of an equivalent base spring model for supplementing virtual fixed point design of bent pile structures. Through this analytical method, the application of the minimum steel reinforcement ratio of the pile (0.4%) is analyzed by taking into account the major influencing parameters. Furthermore, the limit depth for steel reinforcement ratio is proposed through the relationships between column and pile conditions. To obtain the detailed information, it is found that an interactive analysis is intermediate in theoretical accuracy between the virtual fixed point model analysis and full-modeling analysis. Base on this study, it is also found that the maximum bending moment is located within cracking moment of the pile when material nonlinearity is considered. Therefore, the minimum steel reinforcement ratio is appropriately applicable for the optimal design of bent pile structures. Finally, the limit depth for steel reinforcement ratio ($L_{As=x%}$) is proposed by considering the field measured results. It is shown that the normalized limit depth ratio for steel reinforcement ratio ($L_{As=x%}/L_P$) decreases linearly as the length-diameter ratio of pile ($L_P/D_P$) increases, and then converges at a constant value.

• The Journal of Korean society of community based occupational therapy
• /
• v.6 no.1
• /
• pp.49-60
• /
• 2016

Objective : By organizing systematically the study case that use Robot Therapy as intervention tool according to PICO (Patient, Intervention, Comparison, Outcome), This study aims to investigate the domestic Robot Therapy's present condition. Methods : We searched 710 pieces of domestic scientific journal and master's thesis during the past nine years in 'Research Information Sharing Service' and 'National Digital Science Library' database using the keyword 'Robot therapy'. We finally chose 15 pieces of domestic scientific journal and master's thesis among the domestic studies that based on the full text which is affordable and used robot by therapeutic intervention tool. Chosen studies were layed out by PICO that could organize the resources systematically. Results : The quality of study tool was used to the method of evidence-based study level of 5 step classification. More than three stages of quality level study was 13. Result of dividing the studies using robot therapy by intervention field, language, lower extremity(gait), cognition, development and study for the region of the upper extremity of five is advancing. Conclusion : Nationally, the robot therapy has been used in various area that include the upper extremity and lower extremity's intervention of language, cognition, growth and others. We hope that this study for baseline data will be utilized in various area engaging to domestic robot therapy.