• The KIPS Transactions:PartD
• /
• v.10D no.7
• /
• pp.1137-1144
• /
• 2003

The existing Function Point method to estimate the software size has been utilized frequently with the management information system. Due to the expanding usage of the real-time and embedded system, the Full Function Point method is being proposed. However, despite many research is being carried out relation to the software size, the research on the model to estimate the development cost from the measured software size is inadequate. This paper analyzed the linear regression model and power regression model which estimate the development cost from the software FFP The power model is selected, which shows its estimation is most adequate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.520-524
• /
• 1999

The Impact ionization rate is highly anisotropic at low electron energy, while it becomes isotropic at higher energy range in which impact ionization events frequently accur. In this study, full energy band structure obtained by pseudopotential method and Fermi's golden rule is used to calculate impact ionization rate. The calculated impact ionization rate is well fitted to a modified Keldysh formular at 300K and 77K. Full band Monte Carlo simulator is made to investigate the validity of the GaAs impact ionization coefficients at 300K and 77K. Impart ionization process is isotropic under the condition of steady state since anisotrophy appears during very short time at look. Impart ionization coefficients is nearly constant and is anisotropic in electric field applied along the <110> direction at 77K.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1147-1154
• /
• 2011

Auto exposure (AE) in image signal processor (ISP) controls brightness of input image to the proper brightness when it is too dark or bright. But conventional AEs often fail to get proper brightness since AE controls only average brightness of image. Especially in applications that require object recognition, it cannot be solved the problem by AE of ISP. In this paper proposes Histogram Equalization (HE) processes that is the alternative of AE. It also proposes proper method to realize hardware and compensate HE problems conventional by using simple calculation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.462-468
• /
• 2010

In this paper, the new efficient drive control technology based on the conventional full-color electric display board image processing method is proposed. This technology can be applied to high-fidelity large size panel TV and LCD Display, and makes high-fidelity-display-drive control possible in those. The proposed drive control technology can strengthen the image processing function of the conventional technology. Also, the automatic or manual adjustment of contrast, bright, tint, color, gamma revision, etc. can help to achieve high-fidelity vision. This technology can be adopted with lower price.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.421-424
• /
• 2017

This paper describes a full-wave rectifiers for energy harvesting circuit using vibration detector. The designed circuit operates only when the vibration is detected through the vibration detector and the active diode. When there is no vibration, the comparator is turned off to prevent leakage of energy stored in the $C_{STO}$. The energy stored in the capacitor is used to drive the level converter and the active diode. The energy stored in the capacitor is supplied to an active diode designed as an output power. The vibration detector is implemented with Schmitt Trigger and Peak Detector with Hysteresis function. The proposed circuit is designed in a CMOS 0.35um technology and its functionality has been verified through extensive simulations. The designed chip occupies $590{\mu}m{\times}583{\mu}m$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.429-432
• /
• 2017

In this paper, a full - wave rectifying harvesting circuit with a high-performance comparator is designed. Designed circuits are divided into Negative Voltage Converter and Active Diode stages. The comparator included in the active diode stage is implemented as a 3-stage type and divided into pre-amplification, decision circuit, and output buffer stages. The main purpose of this comparator is to reduce the propagation delay and improve the voltage and power efficiency of the harvesting circuit. The proposed circuit is designed with magna $0.35{\mu}m$ CMOS process and its operation is verified by simulation. The chip area of the designed energy harvesting circuit is $900{\mu}m{\times}712{\mu}m$.

• Journal of Information Management
• /
• v.30 no.3
• /
• pp.44-54
• /
• 1999

A description of SGML(Standard Generalized Markup Language) is given together with a detailed description of WIPO Standard ST.32. The benefits of the use of SGML are highlighted-its system Independence and flexibility in building publication systems and full-text databases. A structure of WIPO Standard ST,32 based patent content is defined by DTD(document type definition) written in ST.32, and full-text itself is described with generalized markup depending on DTD. This article explains how to represent a document structure : a hierarchy structure like a entire document, a specific, sub-document, a paragraph, or non-hirarchy structure like a table drawings, or chemical structures. Merits of SGML In patent document processing are also discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.3000-3022
• /
• 2019

Full-duplex (FD) technologies enable wireless nodes to simultaneously transmit and receive signal using the same frequency-band. The FD modes could improve their physical layer throughputs. However, in the wireless ad hoc networks, the FD communications also produce new interference risks. On the one hand, the interference ranges (IRs) of the nodes are enlarged when they work in the FD mode. On the other hand, for each FD pair, the FD communication may cause the potential hidden terminal problems to appear around the both sides. In this paper, to avoid the interference risks, we first model the IR of each node when it works in the FD mode, and then analyze the conditions to be satisfied among the transmission ranges (TRs), carrier-sensing ranges (CSRs), and IRs of the FD pair. Furthermore, in the media access control (MAC) layer, we propose a specific method and protocol for collision avoidance. Based on the modified Omnet++ simulator, we conduct the simulations to validate and evaluate the proposed FD MAC protocol, showing that it can reduce the collisions effectively. When the hidden terminal problem is serious, compared with the existing typical FD MAC protocol, our protocol can increase the system throughput by 80%~90%.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.369-378
• /
• 2024

Purpose: This study aims to verify structural stability by manufacturing a 40m full-scale specimen composed of a segmental U-shaped PSC girder with integrated tensioning systems and a concrete slab, proceeding dynamic behavior tests, and compare the results of the tests with the results of numerical analysis. Method: Dynamic behavior tests were conducted on a full-scale, undamaged specimen using an impact hammer, and the natural frequency and damping ratio were measured and compared with numerical analysis techniques and the general damping ratio of the facilities. Result: The natural frequency of the numerical analysis model consisting of a girder and slab composite section was calculated to be 2.561Hz, the natural frequency of the full-scale specimen was measured to be 2.670Hz, and the damping ratio was calculated to be 0.42~0.68%. Conclusion: The natural frequency of the full-scale specimen was found to be 4.3% larger than that of the numerical analysis model. Since the masses of the full-scale specimen and the numerical analysis model are the same as 99.97%, it can be derived that the stiffness of the full-scale specimen has secured structural safety and stability. As a result, the dynamic behavior stability of the specimen was verified. The measured damping ratio of 0.42~0.68% was found to be a stable dynamic behavior compared to the PSC structures damping ratio of 0.5~1.0% in the elastic region.

• Communications for Statistical Applications and Methods
• /
• v.13 no.2
• /
• pp.441-448
• /
• 2006

If the completely observed data are assumed to have full information, the censoring causes the loss of information. Previous studies have introduced the indices of information loss via measuring relative changes between the data with censoring and without censoring. In this paper, the comparisons are made for the information loss between type I and type II censoring in two sample problems.