• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.260-268
• /
• 2008

Optical diffuse reflectance sensing has potential for rapid and reliable on-site estimation of soil properties. For good results, proper calibration to measured soil properties is required. One issue is whether it is necessary to develop calibrations using samples from the specific area or areas (e.g., field, soil series) in which the sensor will be applied, or whether a general "factory" calibration is sufficient. A further question is if specific calibration is required, how many sample points are needed. In this study, these issues were addressed using data from 42 paddy fields representing 14 distinct soil series accounting for 74% of the total Korean paddy field area. Partial least squares (PLS) regression was used to develop calibrations between soil properties and reflectance spectra. Model evaluation was based on coefficient of determination ($R^2$) root mean square error of prediction (RMSEP), and RPD, the ratio of standard deviation to RMSEP. When sample data from a soil series were included in the calibration stage (full information calibration), RPD values of prediction models were increased by 0.03 to 3.32, compared with results from calibration models not including data from the test soil series (calibration without site-specific information). Higher $R^2$ values were also obtained in most cases. Including some samples from the test soil series (hybrid calibration) generally increased RPD rapidly up to a certain number of sample points. A large portion of the potential improvement could be obtained by adding about 8 to 22 points, depending on the soil properties to be estimated, where the numbers were 10 to 18 for pH, 18-22 for EC, and 8 to 22 for total C. These results provide guidance on sampling and calibration requirements for NIR soil property estimation.

• The Journal of the Korea Contents Association
• /
• v.2 no.1
• /
• pp.24-31
• /
• 2002

The purpose of this study is development of the management and guide system for convenient use of new address guide system for systematic management and use of spatial information gained by management of numerical map of building and road to large basic new address, survey and input of main gate, setting up the road session, naming and input of road name, grant of given number of building, new address guide, life GIS and added information on Web-site in Jecheon-si city area In this study, development and establishment of new address management and guide system in local cities are designed by making full use of GIS function of client server base. A guide system is designed the same database as management system, and it is transformed into Web-GIS environment and developed in order to add the various functions of life GIS as wet as new address guide. In the result, the effectiveness of new address system and guide of Jecheon-si city could be highly increased owing to not only citizens'easy access but also easy availability of various informations necessary in life by developed its system.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.277-286
• /
• 2016

This study proposes customized design process and methodology for wordpress web service based on structural analysis of wordpress theme components to enhance design quality of wordpress sites and increase designer's role in wordpress service domain. Firstly, we have identified problems of wordpress theme information through exploring theme search and theme information analysis in main wordpress theme markets. Secondly, we set up case study to experiment full process of wordpress theme based web design, then found unique problems in each design phases. As a result, customized design process and methodology are proposed for wordpress theme based web design.

• Quality Improvement in Health Care
• /
• v.1 no.1
• /
• pp.56-65
• /
• 1994

Total quality management has been a focus of concern in recent years since some dissatisfaction with the results from implementation of quality assurance programs in the U.S. Many managerial methodologies and innovation guidelines from academic disciplines have been applied to promote TQM programs in the health field. This paper consists of two folds of aspects: firstly to examine TQM's managerial philosophy by comparing with the newly introduced managerial concepts in Business Reengineering; and then to introduce a method for an integrative way of process analysis, Entity Life-Cycle Diagram (ELCD) modeling. The analysis method was compared with Process Map, which is a well-known method for BR applications. To show effectiveness of ELCD modeling, a case of application was introduced using 'drug' as a target entity. With having TQM issues in mind, the result was reflected in designing Entity Relation Diagrams. The results of ELCD modeling turn out to be helpful in designing database related to quality monitoring, in that many monitoring check points can be identified in a systematic way and that queries cross-sectional over organizational boundaries can be generated with a consistent view focusing on the drug use as a single process. Full evaluation of the analysis method remains to be studied until the completion of the information system under construction. But as long as TQM is based on a process-oriented view and needs supports from information system, ELCD can be one of the appropriate choice as a tool for the process analysis.

• Journal of Korea Multimedia Society
• /
• v.16 no.6
• /
• pp.700-707
• /
• 2013

In this paper, we propose a non-rigid registration method of lung parenchyma in temporal chest CT scans using region binarization modeling and locally deformable model. To cope with intensity differences between CT scans, we segment the lung vessel and parenchyma in each scan and perform binarization modeling. Then, we match them without referring any intensity information. We globally align two lung surfaces. Then, locally deformable transformation model is developed for the subsequent non-rigid registration. Subtracted quantification results after non-rigid registration are visualized by pre-defined color map. Experimental results showed that proposed registration method correctly aligned lung parenchyma in the full inspiration and expiration CT images for ten patients. Our non-rigid lung registration method may be useful for the assessment of various lung diseases by providing intuitive color-coded information of quantification results about lung parenchyma.

• Journal of the Korean Society for information Management
• /
• v.35 no.1
• /
• pp.103-127
• /
• 2018

This study examined differences in job stresses, depression and state anxiety levels relating to sociological characteristics of records managers and studying whether the mediating effect of state anxiety levels significantly occurs on the depression followed by their job stresses. So we distributed questionnaires of 9 factors including sociological characteristics to record managers, asking them job stresses, depression, and state anxiety levels, and collected 98 questionnaires finally. We analyzed the effect of mediation on the surveyed data using Regression Analysis. As a result, it was found that there is a full mediating effect of state anxiety level between job stress and depression, and that, therefore, state anxiety levels of the record managers must be managed to lower their depression levels.

• Journal of KIISE:Databases
• /
• v.34 no.6
• /
• pp.493-502
• /
• 2007

Due to a growing interest in searching and expressing knowledge effectively, knowledge management methods such as Topic Map are becoming more important. Topic Map organizes knowledge that is full of intricate relations, so maintaining and managing Topic Map consistently is very essential. TMCL and other constraint languages have limits as they can check simple constraints but can not support complex constraints like dependence constraints. Current constraint checking systems operating at the application level are also showing an inferiority in performance. In this paper, we extend TMCL based on the characteristics of other constraint languages in the information system field and related fields. We build and propose an RDBMS-based Topic Map constraint checking system to support the extended constraint language effectively. This new system handles complex types of constraints like dependency constraint as well as basic Topic Map constraints present in the TMCL. As the system examines each constraint it uses templates to generate queries for effective checking and overall shows a higher performance level than current systems.

• Journal of Korean Library and Information Science Society
• /
• v.36 no.3
• /
• pp.213-231
• /
• 2005

Yeonhaengrok is a document recorded by one member of the envoy sent to the China from 17 to 19 century. Ik-mo Lee, a member of the envoy, wrote a full explanation of the visit from Nov. 24 1796 to Mar. 7 1797 in his writing $\ulcorner$Byongjin Yeonhaengrok${\lrcorner}$. $\ulcorner$Byongjin Yeonhaengrok${\lrcorner}$, which is omitted in the complete collection of $\ulcorner$Yeonhaengrok${\lrcorner}$, has been newly found at the Family of Suwon Baek's house locating at the Sanggum Vil., Yongsan Town, Jangheung County of Chonnam Province. $\ulcorner$Byongjin Yeonhaengrok${\lrcorner}$ contains an historical meaning that it is an official record of the official envoy that was sent first after the Injong's enthronement in China. This study observed the bibliographical features of $\ulcorner$Byongjin Yeonhaengrok${\lrcorner}$, the time of the transcription, the progress of receiving by the Suwon Baek family. And certified the details of the Byongjin envoy, going and returning between Hanyang and Beijing, staying schedules of the envoy in Beijing.

• Journal of the Korean Society of Safety
• /
• v.24 no.5
• /
• pp.92-100
• /
• 2009

This study evaluated the effects of the syllable number(one, two), font type(gothic, myung), color contrast (black on white, white on black), display type(paper, LCD), age(20s, 60s) and character size(2~80pt) on the Korean characters' legibility. Total twenty subjects from two age groups (20s: n=10, 60s: n=10, five male and five female in each group) participated in the legibility test. A target panel was presented in the distance of 50 cm, and subjects conducted a reading tests for, in total, 16 treatment conditions (full combination of syllable number, font type, color contrast and display type). Results showed that two-syllable words revealed better legibility than one-syllable character. The main effects of the age, display type, font type, color contrast, and character size were statistically significant(p<0.01). Paper showed better legibility than LCD, particularly in the 20s and in the character sizes of less than 9pt. Gothic revealed more correct answers than Myung, particularly in the 60s, paper, and white on black conditions. It is expected that these results can provide basic data for the determination of the Korean characters' minimum legible size standards. For example, the minimum legible size for the Gothic and black on white characters presented in the paper should be 5pt for 20s and 1lpt for 60s if the 75% correct reading(3 correct answers in this study) was applied for the legibility criterion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.338-347
• /
• 2005

In this paper, a decimation-in-time search direction algorithm for displacement prediction of moving object is proposed. The initialization of the proposed algorithm for moving direction prediction is performed by detecting moving objects at sequential frames and by obtaining a moving angle and a moving distance. A moving direction of the moving object at current frame is obtained by applying the decimation-in-time search direction mask. The decimation-in-tine search direction mask is that the moving object is detected by thinning out frames among the sequential frames, and the moving direction of the moving object is predicted by the search mask which is decided by obtaining the moving angle of the moving object in the 8 directions. to examine the propriety of the proposed algorithm, velocities of a driving car are measured and tracked, and to evaluate the efficiency, the proposed algorithm is compared to the full search algorithm. The evaluated results show that the number of displacement search times is reduced up to 91.8$\%$ on the average in the proposed algorithm, and the processing time of the tracking is 32.1ms on the average.