• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2213-2223
• /
• 2005

In order to reconstruct a full 3D human model in reverse engineering (RE), a 3D scanner needs to be placed arbitrarily around the target model to capture all part of the scanned surface. Then, acquired multiple scans must be registered and merged since each scanned data set taken from different position is just given in its own local co-ordinate system. The goal of the registration is to create a single model by aligning all individual scans. It usually consists of two sub-steps: rough and fine registration. The fine registration process can only be performed after an initial position is approximated through the rough registration. Hence an automated rough registration process is crucial to realize a completely automatic RE system. In this paper an automated rough registration method for aligning multiple scans of complex human face is presented. The proposed method automatically aligns the meshes of different scans with the information of features that are extracted from the estimated principal curvatures of triangular meshes of the human face. Then the roughly aligned scanned data sets are further precisely enhanced with a fine registration step with the recently popular Iterative Closest Point (ICP) algorithm. Some typical examples are presented and discussed to validate the proposed system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.737-740
• /
• 2004

The interior noise reduction of construction equipment is concerned for improving the driver comfort in this study. From the baseline test, the exhaust noise gives a big contribution to the interior noise of construction equipment. And the detail noise contribution analysis of the exhaust system, the tail pipe, which is for ventilation an engine room hot air to outside, amplify the exhaust noise around operating engine RPM associated with tail pipe structural and cavity resonances. To remove the noise amplifying effects, the tail pipe has to be shorted its length. Even the noise can be attenuated the ventilation flux when using the redesigned tail pipe is reduced than the original one. Thus, a shape change of the tail pipe is additionally needed for increasing the ventilation flux and attenuating the exhaust noise using CFD technique. The CFD results of the tail pipe give a meaning full information what obstructs the ventilation flex in the current design and how changes the tail pipe.

• Korean Journal of Organic Agriculture
• /
• v.10 no.2
• /
• pp.67-83
• /
• 2002

In the paper, the actual situation of Korean organic agriculture and its development history regards to basic skills of organic farming were reported. And an education for organic farming in the universities with schools of agriculture in European countries was also reported to deliver the information on the course of organic agriculture for Korean Universities facing the problem which have a lower admission competition than previous Year. The examination for organic engineer certificate which was introduced in 2001 and the proposed government research institute, so called "Research Center of Organic Agriculture" were also shortly discussed. In the conclusion, \circled1 the establishment of "research Center of Organic Agriculture" which should by attached RDA for the systematic approach of research for organic agriculture and the test of agricultural materials using for organic farming, \circled2 department of organic agriculture in the Universities with schools of agriculture to offer next generation an opportunity to learn an organic farming parallel to conventional farming, \circled3certification body system by third party, and \circled4 full support by Korean government and scientist society for "Asian Research Network of Organic Agriculture (ARNOA)" headquartered in Korea as international research organization were strongly suggested.

• Journal of Internet Computing and Services
• /
• v.4 no.5
• /
• pp.69-76
• /
• 2003

In this paper we show a new learning algorithm for pattern classification. This algorithm considered a scheme to find a solution to a problem of incremental learning algorithm when the structure becomes too complex by noise patterns included in learning data set. Our approach for this problem uses a pruning method which terminates the learning process with a predefined criterion. In this process, an iterative model with 3 layer feedforward structure is derived from the incremental model by an appropriate manipulations. Notice that this network structure is not full-connected between upper and lower layers. To verify the effectiveness of pruning method, this network is retrained by EBP. From this results, we can find out that the proposed algorithm is effective, as an aspect of a system performence and the node number included in network structure.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.61-69
• /
• 2016

Software testing is an activity to find defects included in software through creating test cases from the software system specification. In order to perform software testing effectively, it is required to prepare the full test plan, to create well-defined test cases, and to execute test monitoring activities systematically. Most existing researches for the test approaches focus on automating the activities from the test cases generation to the test execution. Contrary to those approaches, we study automatic approaches for test monitoring activities. For this, we identify the research issues that should be solved to automate test monitoring activities. Next, with those solutions, we suggest the construction method for an automatic framework for test monitoring.

• Journal of Surface Science and Engineering
• /
• v.40 no.4
• /
• pp.185-189
• /
• 2007

A scanning electron microscope (SEM) is a complex system, consisting of many sophisticated components. For a systematic characterization, a $2^4$ full factorial experiment was conducted. The SEM components examined include condenser lens 1 and 2 (denoted as A and B, respectively), and Objective lens (coarse and fine-denoted as C and D respectively). A statistical analysis was conduced to investigate factor effects and variations In response surfaces. Among four factors, main effect analysis revealed that A and D were Identified as the dominant factor. Moreover, B showed conflicting effect against C. The $R^2$ of statistical regression model constructed was about 69.6%. The model generated 3D response surface plots facilitated understanding of complex tactor effects.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.12
• /
• pp.433-442
• /
• 2014

In this paper, we introduce the client side cache of distributed file system for enhancing read performance by eliminating the network latency and decreasing the back-end storage burden. This performance enhancement can expand the fields of distributed file system to not only cloud storage service but also high performance storage service. This paper shows that the distributed file system with client side SSD cache can satisfy the requirements of VDI(Virtual Desktop Infrastructure) storage. The experimental results show that full-clone is more than 2 times faster and boot time is more than 3 times faster than NFS.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.343-350
• /
• 2003

This paper presents a new agent which convert HTML contents to VXML contents automatically for voice services via web. In this paper, I propose an interactive hybrid sequential contents selection method to select desired contents fast and robustly from known web pages. It uses real time structural features as well as embedded text and/or priori structural knowledge such as link symbol position. To verify its effectiveness, a full agent system is implemented and tested. The method reflects user intention more accurately than conventional selections using structural features and is more robust to variations of HTML programming techniques. The agent is fast and has less computational burden than methods use XML or XHTML conversion as intermediate stage.

• Korean Journal of Remote Sensing
• /
• v.23 no.5
• /
• pp.401-408
• /
• 2007

Animated anaglyph is the most cost-effective method for 3D stereo visualization of virtual or actual 3D geo-based data model. Unlike 3D anaglyph scene generation using paired epipolar images, the main data sets of this study is the multi-typed 3D feature model containing 3D shaped objects, DEM and satellite imagery. For this purpose, a prototype implementation for 3D animated anaglyph using OpenGL API is carried out, and virtual 3D feature modeling is performed to demonstrate the applicability of this anaglyph approach. Although 3D features are not real objects in this stage, these can be substituted with actual 3D feature model with full texture images along all facades. Currently, it is regarded as the special viewing effect within 3D GIS application domains, because just stereo 3D viewing is a part of lots of GIS functionalities or remote sensing image processing modules. Animated anaglyph process can be linked with real-time manipulation process of 3D feature model and its database attributes in real world problem. As well, this approach of feature-based 3D animated anaglyph scheme is a bridging technology to further image-based 3D animated anaglyph rendering system, portable mobile 3D stereo viewing system or auto-stereo viewing system without glasses for multi-viewers.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.397-408
• /
• 2008

A wide variety of applications of imaging spectrometer have been proved using data from airborne systems. The Compact Airborne Imaging Spectrometer System (CAISS) was jointly designed and developed as the airborne hyperspectral imaging system by Korea Aerospace Research Institute (KARI) and ELOP inc., Israel. The primary mission of the CAISS is to acquire and provide full contiguous spectral information with high spatial resolution for advanced applications in the field of remote sensing. The CAISS consists of six physical units; the camera system, the gyro-stabilized mount, the jig, the GPS/INS, the power inverter and distributor, and the operating system. These subsystems are to be tested and verified in the laboratory before the flight. Especially the camera system of the CAISS has to be calibrated and validated with the calibration equipments such as the integrating sphere and spectral lamps. To improve data quality and its availability, it is the most important to understand the mechanism of imaging spectrometer system and the radiometric and spectral characteristics. The several performance tests of the CAISS were conducted in the camera system level. This paper presents the major characteristics of the CAISS, and summarizes the results of performance tests in the camera system level.