• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.664-670
• /
• 2014

Generally, the properties of metamaterials are analyzed based on the infinite array of the unit cells. In real application of the metamaterial, however, the array has to be finite. Hence, it is important that a method can analyze the effect of the finite array of the metamaterial. In this paper, a model is proposed which can calculate the scattering by a large-size finite array of an I-shaped metamaterial without a full-wave simulation. The proposed model is based on the surface current estimation of each unit cells. The ratio of the current distribution on a finite array of the metamaterial to that of the infinite array of the same metamaterial for a TM polarized incident wave is approximated as a quartic polynomial. The coefficients of the polynomial are a function of the physical dimension of the metallic patch. Hence, the current distribution of the finite metamaterial can be estimated based on the proposed polynomial and the current of the infinite array. The scattered field is calculated by using the surface current model. The proposed model is numerically and experimentally verified by comparing calculated and measured RCS(Radar Cross Section) data.

• Journal of the Korean Home Economics Association
• /
• v.41 no.3
• /
• pp.181-196
• /
• 2003

Investigated kinds and utilization frequency for traditional food and Particular food to systematize Gwangju city and Chollanamdo area traditional food culture. Awareness for traditional food had pride because taste is various, and did that must use much when was festive day. Investigation subject were feeling necessity about accession, development of traditional food, and manufacture of traditional food, succession did that must take charge in home. Characteristic of taste for Gwangju city, Chollanamdo food was deep taste. Difference between variable was significant that age, religion that have pride about traditional food, attainments in scholarship, monthly income that used time much traditional food, degree that give from traditional food to snack is age, attainments in scholarship, years of married life, religion, reason that give snack to traditional food is daughter-in-law order, kind of traditional food that give to snack is age, monthly income mouth, opinion about accession and development of traditional food is age, religion, daughter-in-law order, reason that must inherit and develop traditional food is attainments in scholarship, time that eat much traditional food is attainments in scholarship, a person, medium that learn cuisine of traditional food is age, opportunity that is been interested to traditional food is age, attainments in scholarship, years of married life. By utilization rate of food-tasting food subdivisions of the season, used much by rice-cake soup, fermented rice punch, order of cake made from glutinous rice New Year's Day, by herbs, Gimgui, Ogokbap's order January Full Moon Day on the lunar calendar. By a cake made in the shape of a flower, azalea honeyed juice mixed with fruits as a punch order to Samjitnal, by beans panbroiling, dropwort raw order Buddha's Birthday, Tano Festival uses Charyunbyeong and used Tteoksudan in Yudu and used much by young chicken soup with ginseng and other fruits, watermelon order period of midsummer heat. Used songpyon and fermented rice punch in Full-moon Harvest Day, and Junggujeol used Chrysanthemum griddle cakes made in flower Pattern, and red-bean gruel taken on the winter solstice, and Nappyeongjeolsik was utilizing Goldongban. Pyebaek food utilization ratio was high the utilization rate by chestnut, jujube, chicken, wine order. The contributiveness food utilization rate was high the utilization rate by rice cake, dried croaker, fruit, oil-and-honey pastry order. The large table food utilization rate was high the utilization rate by fermented rice punch, fruit, steamed short-ribs order.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.81-88
• /
• 2018

The present study evaluated the effective arrangement approach of transverse reinforcement in the jacket section for seismic strengthening of reinforced concrete columns. To simulate the full-scale columns, the section dimensions were determined as $450{\times}450mm$ for non-seismic existing columns and $750{\times}750mm$ for section enlargement strengthening columns. Over-lapped channel-shape bars and prefabricated bar units were proposed for closed-hoops in the jacket section, and conventional cross-ties anchored into existing columns and V-ties were considered for the supplementary ties. Test results showed that the axial capacity of the existing column and section enlargement columns with over-lapped channel-shape hoops was similar to the nominal strength calculated using ACI 318-14 procedure whereas the section enlargement column with prefabricated bar units possessed 1.25 times higher axial capacity than the nominal prediction. Furthermore, the axial ductility ratio of the section enlargement column with prefabricated bar unit was 139% higher than that of the existing column despite the potential size effect on ductility of concrete. Thus, it can be concluded that the developed prefabricated bar unit technique is practically useful for preventing the premature buckling of longitudinal reinforcement and confining core concrete in the section enlargement strengthening columns.

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.174-184
• /
• 2008

Complementary color filter array (CCFA) is widely used in consumer-level digital video cameras, since it not only has high sensitivity and good signal-to-noise ratio in low-light condition but also is compatible with the interlaced scanning used in broadcast systems. However, the full-color images obtained from CCFA suffer from the color artifacts such as false color and zipper effects. These artifacts can be removed with edge-adaptive demosaicking (ECD) approaches which are generally used in rrimary color filter array (PCFA). Unfortunately, the unique array pattern of CCFA makes it difficult that CCFA adopts ECD approaches. Therefore, to apply ECD approaches suitable for CCFA to demosaicking is one of the major issues to reconstruct the full-color images. In this paper, we propose a new ECD algorithm for CCFA. To estimate an edge direction precisely and enhance the quality of the reconstructed image, a function of spatial variances is used as a weight, and new color conversion matrices are presented for considering various edge directions. Experimental results indicate that the proposed algorithm outperforms the conventional method with respect to both objective and subjective criteria.

• Journal of the Korean Institute of Gas
• /
• v.25 no.1
• /
• pp.20-29
• /
• 2021

During multi-stage fracturing in a low permeable shale formation, stress interference occurs between the stages which is called the "stress shadow effect(SSE)". The effect may alter the fracture propagation direction and induce ununiform geometry. In this study, the stress shadow effect on the hydraulic fracture geometry and the well productivity were investigated by the commercial full-3D fracture model, GOHFER. In a homogeneous reservoir model, a multi-stage fracturing process was performed with or without the SSE. In addition, the fracturing was performed on two shale reservoirs with different geomechanical properties(Young's modulus and Poisson's ratio) to analyze the stress shadow effect. In the simulation results, the stress change caused by the fracture created in the previous stage switched the maximum/minimum horizontal stress and the lower productivity L-direction fracture was more dominating over the T-direction fracture. Since the Marcellus shale is more brittle than more dominating over the T-direction fracture. Since the Marcellus shale is more brittle than the relatively ductile Eagle Ford shale, the fracture width in the former was developed thicker, resulting in the larger fracture volume. And the Marcellus shale's Young's modulus is low, the stress effect is less significant than the Eagle Ford shale in the stage 2. The stress shadow effect strongly depends on not only the spacing between fractures but also the geomechanical properties. Therefore, the stress shadow effect needs to be taken into account for more accurate analysis of the fracture geometry and for more reliable prediction of the well productivity.

• Smart Media Journal
• /
• v.11 no.10
• /
• pp.30-35
• /
• 2022

Previous studies in various medical specialties have shown that fewer than 50% of abstracts presented at meetings are subsequently published, but only a few studies have been performed in pediatric dentistry. The purpose of this study was to investigate the rate of publication of articles based on abstracts presented at the Korean Academy of Pediatric Dentistry (K.A.D.P) spring and fall Congress for 2001 to 2011. The abstracts for both oral and poster presentation were collected. A RISS search was then performed to identify the publication of full-length articles based on those titles of the abstracts. A total of 706 abstract presentations were done at the 24 meetings (477 as oral presentation, 229 as poster presentations). Of these, from 45.2%(319) in 2011 to 82.9%(585) in 2022 was subsequently published. The publication ratio for orally presented abstracts was from 52.2%(249) in 2011 to 86.6%(413) in 2022, poster presentations from 30.6%(70) in 2011 to 75.1%(172) in 2022. We suggest that presenters at these meetings should expand their abstracts into full manuscripts and seek to publish them in peer-reviewed journals for the benefit of the profession. We believe that the results of changes in the publication rate over the past 12 years are attributable to the digitalized environment such as electronic literature search and electronic publication.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.8-12
• /
• 2005

Response in a modified reciprocal recurrent selection scheme for egg production was evaluated considering variable family sizes and genetic correlation between purebred and crossbred half sisters. The criteria of selection of purebred breeders included pullet's own performance, purebred full and half sisters and crossbred half sister's performance. Heritability of egg production of crossbreds (aggregate genotype) and purebred's was assumed to be 0.2 and genetic correlation between purebred and crossbred half sisters ($r_{pc}$) as 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, -0.1, -0.2, -0.3, -0.4, -0.5 and -1.0. Number of dams per sire to produce purebred and crossbred progenies assumed to be 5, 6, 7, 8, while number of purebred female progeny ($N_p$) and crossbred progeny ($N_c$) per dam were considered to be 3, 4, 5 and 6 in each case. Considering phenotypic variance as unity, selection indices were constructed for different combinations of dams and progeny for each value of $r_{pc}$. Following selection index theory, response in crossbred and purebred for egg production was computed. Results indicated that response in crossbreds depended mainly on crossbred family size and also on magnitude of$r_{pc}$ irrespective of its direction, and response was greater with large crossbred family size than the purebred families. Correlated response in purebreds depends both on magnitude and direction of $r_{pc}$ and was expected to be greater with large purebred family size only. Inclusion of purebred information increased the accuracy of selection for crossbred response for higher magnitude of$r_{pc}$ irrespective of its direction. Present results indicate that desirable response in both crossbred and purebred performance is a function of $r_{pc}$ and family sizes. The ratio of crossbred and purebred family sizes can be optimized depending on the objective of improving the performance of crossbreds and/or of purebreds.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.07a
• /
• pp.1-12
• /
• 2002

Desalination by reverse osmosis (RO), which first entered commercial use in the 1970s, was initially mainly used for treating brackish water. Technological progress led to the development of an RO membrane enabling single-pass seawater desalination. Toyobo succeeded in developing a single-pass seawater desalination RO module composed of hollow fiber type membranes made of cellulose triacetate in 1978, and then in 1979 began production of the first commercially available double-element module. This double-element module has many advantages suitable for seawater desalination. It has high chlorine tolerance and high salt rejection, derived from the properties of the membrane material, and it is highly resistant to fouling and scaling matters due to the unique flow pattern and fiber bundle configuration. These advantages help to explain why the Toyobo double-element module has been used so successfully at the many seawater desalination plants around the world. Since the 1980s, large plants capable of desalinating several tens of thousands of cubic meters a day have sprung up around the Mediterranean and In the Middle East. The Jeddah RO Phase I Plant, which has a capacity of 56, 800m$^3$/day, went into operation in 1989. In 1994, the same sized Phase II Plant came on stream, giving the plant a huge total capacity of 113, 600m$^3$/day. The plant constructor Mitsubishi Heavy Industries, Ltd. (MHI), and the RO membrane manufacturer Toyobo Co., Ltd. In 1998, the world's largest RO seawater desalination plant in operation, which has a capacity of 128, 000m$^3$/day and is run by Saudi Arabia's Saline Water Conversion Corporation (SWCC), went into operation at Yanbu. RO seawater desalination technology has thus already reached the stage of full-scale commercial use. In order to encourage its wider use, however, RO desalination needs to be made more economical by lowering construction and water treatment costs. Toyobo has therefore developed a new economical RO desalination system by a recovery ratio of 60% using a high-pressure module with a high product flow rate. In 2000, Toyobo high recovery membrane module was selected for the largest seawater desalination plant in Japan, which has a capacity of 50, 000m$^3$/day.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.991-997
• /
• 2009

Transmit beamforming is simple method to achieve the full diversity gain that is available in multiple antenna(MIMO) wireless systems. Unfortunately, the prior condition to achieve this gain requires perfect channel knowledge at both transmitter and receiver, which is impractical on account of limited feedback link. Therefore, for the practical system, codebook based feedback scheme is often employed, where the beamforming vector is selected from the codebook to maximize the output signal-to-noise ratio (SNR) at receiver, and the receiver only sends back the index of the best beamforming vector to the transmitter. In this paper we derive analytical expression of average bit error rate (BER) for the codebook based transmit beamforming MISO system over the feedback error channel. Using this analytical result, we present optimum codebook indexing scheme to improve the performance of this system. From some selected numerical examples we show that our proposed codebook indexing scheme can provide nonnegligible performance improvements in terms of average BER over the severe feedback error channel.

• Korean Journal of Ecology and Environment
• /
• v.36 no.4 s.105
• /
• pp.463-466
• /
• 2003

This study was conducted to introduce the characteristics of the freshwater environment of Mulkol, considering that it is less known area about the ecosystem of the Tok Island. The salinity of freshwater in the Mulkol was less than 2.0 psu, while its periphytic algal biomass was thriving with 25.9 ${\mu}g\;chl-a/cm^2$. As for the nutrients in water, the content of $NH_4$ was higher than the rest of inorganic nitrogen components, and SRP and SRSi were much higher as 117.3 ${\mu}$g P/l and 4,104.6 ${\mu}$g Si/l respectively, than nitrogen components. Also, the ratio of N/P was found less than 1.0, revealing the condition that N was greatly limited. The high level of nutrient concentration and periphytic algal biomass at the Mulkol ecosystem could be explained as a result of natural pollution, but no full explanation was made in this study. It is a question that needs additional research in the future.