• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.4
• /
• pp.557-564
• /
• 2009

Two experiments were conducted to evaluate the use of various levels of full-fat sunflower seeds (FFSS) on broiler performance and carcass characteristics. In the first experiment, FFSS was included in a basal diet at 70, 140, and 210 g/kg and the $AME_n$ values of the experimental diets were determined. The linear regression equation of $AME_n$ values on rate of inclusion was calculated. Extrapolation value for the $AME_n$ of FFSS at 100% inclusion was 14.22 MJ/kg. In the second experiment, diets containing various levels (0, 70, 140, and 210 g/kg) of FFSS were given to broilers (Ross strain) from 0 to 49 d. At 28 days of age, blood parameters and digestive enzyme activities were determined and carcass parameters were evaluated at 49 days of age. Weight gain, feed intake and feed conversion ratio (FCR) were improved (p<0.05) when broilers were fed various levels of FFSS in the starter and finisher diets. Breast, thigh, gastrointestinal tract and gizzard weight percentages were not affected by dietary treatments; however, liver weight percentage was decreased significantly (p<0.05) and weight of abdominal fat decreased but this effect was not significant. The activities of digestive enzyme (protease and ${\alpha}$-amylase) were not influenced by the treatments. Activity of alkaline phosphatase, concentrations of calcium, phosphorus, glucose, triglyceride, protein, high density lipoprotein (HDL) and low density lipoprotein (LDL) were not affected by incorporation of FFSS in the broiler diet. Although concentration of HDL increased and LDL decreased, these effects were not significant. The results of this study indicate that FFSS can be used at up to 21% in broiler diets without adverse effects on performance or other parameters of chickens.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.4
• /
• pp.310-317
• /
• 2006

This study was conducted to investigate the influence of drought stress during the pod developing and seed filling stage on source-sink relationships of soybean (Glycine max). Drought treatments were imposed by withholding water at the full-pod stage, 19 days after flowering, and then limited watering was relieved at 15 days after the initiation of drought treatment. Soybean seed yield was reduced by 39% mainly due to decreased pod number under drought stress, but the 100-seed weight was relatively less reduced. In spite of the 15-day drought during the full-pod stage, soybean produced good seeds showing similar l00-seed weight, protein, starch and soluble sugar content to those from the well-watered. Although drought during the full-pod stage caused source limitations; i.e. accelerated leaf senescence and reduced leaf soluble sugars, it did not cause limitations of other source characteristics such as SGR and leaf starch level. This is because the reduction in size of sinks, such as pod and seed abortions compensated for source limitations, resulting in balanced source-sink as expressed by LAR and the ratio of leaf area to seed dry weight. Drought stress during the pod developing and seed filling stage did not disrupt the source-sink balance

• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.89-103
• /
• 2014

According to experimental studies made so far, design formula of shear characteristics suggested by ISO 22762 and JEAG 4614, representative design code for Lead Rubber Bearing(LRB) shows dependence caused by changes in compressive stress. Especially, in the case of atypical special structure, such as a nuclear power structure, placement of seismic isolation bearing is more limited compared to that of existing structures and design compressive stress is various in sizes. As a result, there is a difference between design factor and real behavior with regards to shear characteristics of base isolation device, depending on compressive stress. In this study, a full-scale low hardness device of LRB, representative base isolation device was manufactured, analyzed, and then evaluated through an experiment on shear characteristics related to various compressive stresses. With design compressive stress of the full-scale LRB (13MPa) being a basis, changes in shear characteristics were analyzed for compressive stress of 5 MPa, 10 MPa, 13 MPa, 15 MPa, and 20 MPa based on characteristics test specified by ISO 22762:2010 and based on the test result, a regression analysis was made to offer an empirical formula. With application of proposed design formula which reflected the existing design formula and empirical formula, trend of horizontal characteristics was analyzed.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.15-24
• /
• 1998

In this paper, we present new method of fractal image coding based on iterated function system(IFS) suggested by Barnsley. In previous Fractal coding using full searching algorithm, the quality of reconstructed image was better than other fractal coding method's, but it took a long time in that algorithm for searching domain blocks matched. And it is performed through linear affine transform, therefore it is difficult to approximate the complex range blocks. In this paper, using quadtree partitioning, complex blocks are divided into more smaller blocks, and simple blocks are merged to more larger blocks. So, we can got more precisely approximated range blocks and reduce the number of transformations. Hence, we have improved the compression ratio. In addition, we restrict the region of searching domains in order to reduce the searching time and coding time. Compared with full searching algorithm, we reduced coding time drastically, and quality of reconstructed image was better in terms subjective criteria. And compared with Monro's, our method is slower, but we could obtain a reconstructed image with better quality.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.656-665
• /
• 2021

In this study, trim tabs were attached to end of stern hull of a small high-speed vessel of length approximately 10 m and Froude number 1.0 to improve resistance performance and passenger comfort. Before computational fluid dynamics (CFD) simulations to assess the performance according to various geometries of the trim tab, the scale effect had been found through a previous study, so full-scale simulations were performed. The trim tab chord length was set to 0.5 %, 1.0 % and 1.5 % of L_PP, and its angle to base line was varied in intervals of 5°. It decreased trim by stern and flotation: the greater the angle and length, the greater was the effect. Then it had pressure resistance decreased and shear resistance increased, and reduction ratio of total resistance varied accordingly. The results of this study indicated that the resistance performance was improved about 27 % at optimal running attitude that was the trim by stern about 1.5°.

• Infection and chemotherapy
• /
• v.50 no.4
• /
• pp.319-327
• /
• 2018

Background: Lancet-related needlestick injuries (NSIs) occur steadily in clinical practices. Safety-engineered devices (SEDs) can systematically reduce NSIs. However, the use of SEDs is not active and no study to guide the implementation of SEDs was known in South Korea. The lancet-related NSIs may be eliminated to zero incidence using a SED lancet with effective sharp injury protection and reuse prevention features. Materials and Methods: We implemented a SED lancet by replacing a conventional prick lancet in a tertiary hospital in a sequential approach. A spot test of the new SED was conducted for 1 month to check the acceptability in practice and a questionnaire survey was obtained from the healthcare workers (HCWs). A pilot implementation of the SED lancet in 2 wards was made for 1 year. Based on these preliminary interventions, a hospital-wide full implementation of the SED lancet was launched. The incidence of NSIs and cost expenditure before and after the intervention were compared. Results: There were 29 cases of conventional prick lancet-related NSIs for 3 years before the full implementation of SED lancet. The proportion of prick lancet-related NSIs among yearly all kinds of NSIs during two years before the pilot study was average 11.7% (22/188). Pre-interventional baseline incidence of all kinds of NSIs was 7.01 per 100 HCW-years. After the full implementation of SED lancet, the lancet-related NSIs became zero in the 2nd year (P = 0.001). The average direct cost of 18,393 US dollars (USD) per year from device and post-exposure medical care before the intervention rose to 20,701 USD in the 2nd year of the intervention. The incremental cost-effectiveness ratio was 210 USD per injury avoided. Conclusion: The implementation of a SED lancet could eliminate the lancet-related NSIs to zero incidence. The cost increase incurred by the use of SED lancet was tolerable.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.1
• /
• pp.37-46
• /
• 2021

Nitrogen and phosphorus in livestock manure are environmental pollutants, but also could be valuable industrial resources. In the present study, we (1) introduced various nitrogen removal technologies such as stripping, thermal method, membrane, and electrodialysis, (2) reviewed relevant studies reported in 2011-2020, in particular, full-scale experiences, and (3) assessed each technologies based on the above survey results. In addition, we provided the information on the appropriate range of the pH, temperature, gas and liquid ratio, and so on in ammonia stripping process, and expected mass balance when it is connected to biogasification process. We hope the content herein can be helpful for making policy and operating full-scale plant in Korea.

• Clinics in Shoulder and Elbow
• /
• v.26 no.2
• /
• pp.169-174
• /
• 2023

Background: Sleep quality, quantity, and efficiency have all been demonstrated to be adversely affected by rotator cuff pathology. Previous measures of assessing the impact of rotator cuff pathology on sleep have been largely subjective in nature. This study was undertaken to objectively analyze this relationship through the use of activity monitors. Methods: Patients with full-thickness rotator cuff tears at a single institution were prospectively enrolled between 2018 and 2020. Waist-worn accelerometers were provided for the patients to use each night for 14 days. Sleep efficiency was calculated using the ratio of the time spent sleeping to the total amount of time that was spent in bed. Retraction of the rotator cuff tear was classified using the Patte staging system. Results: This study included 36 patients: 18 with Patte stage 1 disease, 14 with Patte stage 2 disease, and 4 patients with Patte stage 3 disease. During the study, 25 participants wore the monitor on multiple nights, and ultimately their data was used for the analysis. No difference in the median sleep efficiency was appreciated amongst these groups (P>0.1), with each cohort of patients demonstrating a generally high sleep efficiency. Conclusions: The severity of retraction of the rotator cuff tear did not appear to correlate with changes in sleep efficiency for patients (P>0.1). These findings can better inform providers on how to counsel their patients who present with complaints of poor sleep in the setting of full-thickness rotator cuff tears.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.9
• /
• pp.1263-1271
• /
• 2000

A total of 80 piglets ($5.85{\pm}0.62kg$ BW; 21 d of age) were used to study the effect of carnitine addition to extruded full-fat soybean (EFS) diets on the growth of weaned pigs. Pigs were allotted into five treatments based on body weight, in a completely randomized block design. Each treatment has 4 replicates of 4 heads each. Treatments were 1) SBM (positive control), 2) EFS without carnitine (negative control), 3) EFS with 50 ppm carnitine, 4) EFS with 100 ppm carnitine and 5) EFS with 150 ppm carnitine. During d 0 to 14, piglets were fed diets containing 3,400 kcal ME, 23% crude protein, 1.65% lysine, 0.9% Ca and 0.8% P and for the period of d 15 to 28, piglets were fed diets supplying 3,300 kcal ME, 20% crude protein, 1.55% lysine, 0.9% Ca and 0.8% P. The urease activity of EFS (0.18) were three times higher than SBM (0.07). During d 0-14, pigs fed SBM had greater ADG and ADFI compared to pigs fed extruded full-fat soybean diets (p<0.05). Feed conversion ratio was not different among treatments. No linear or quadratic effect of carnitine addition was found in growth performance. During d 15-28, piglets fed SBM diet also showed better ADG and FCR with no significant differences among treatments. Feed intake tended to increase as carnitine addition level was increased (p=0.10). For overall period (d o to 28), the best performance was observed in pigs fed SBM diet. CP digestibility was higher in pigs fed SBM diet than piglets fed EFS diet at d 14, and DM and CP digestibility tended to be higher in pigs fed SBM diet at d 28. Blood metabolites (BUN, glucose and cholesterol)were not affected by treatments. In conclusion, based on the results of this study piglets at 21 d of age appeared to be not ready for extruded full-fat soybean (FFSB) in their diets. Piglets fed extruded FFSB showed decreased growth rate compared to piglets fed SBM diet. Nutrient utilization was also poor in piglets fed extruded FFSB diets. L-carnitine addition at the level of 50 to 150 ppm was not effective in improving the growth performance of pigs fed EFS diets.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.1
• /
• pp.13-24
• /
• 1994

Purse seiner detects a fish school navigating in full speed with the aid of fish finder, sonar, helicopter, etc., and casts a net quickly to enclose the fish school in purse seine net according to the movement of the fish school, wind, and current. At this moment, if the time of casting a net, direction, speed, and turning circle are net suitable, it is unavoidable to lose fish school founded with hard efforts and we only consume our efforts of casting and hauling the net. Therefore, in order to enclose the fish school to enhance the amount of fish for each casting, the author investigated the type of ships equipped with purse seiners and examined maneuvering tests so that we provide some basic information to figure out the ability of steerage correctly. The results obtained are summarized as follows: 1. Block coefficients of pelagic tuna purse seiners with gross tonnage between 500 and 1500 tons are recorded between 0.50 and 0.55 which are greater than those of off shore purse seiners recorded as between 0.44 and 0.54 and less than those of various cargo ships recorded as between 0.56 and 0.84. 2. L/B, L/D, B/D, B/T, and T/D of the class of gross tonnage between 75 and 130 tons are respectively 4.49, 11.00, 2.45, 2.85 and 0.86 as their average and those of the class of between 500 and 1500 tons are 4.89, 10.53, 2.15, 2.73 and 0.75 respectively, which are quite different from those of various cargo ships recorded as 6.0~7.5, 11.0~12.0, 1.6~2.0, 2.2~2.8 and 0.65~0.75 respectively. 3. Rudder area ratio of purse seiners of the class of between 75 and 130 tons is 1/24~1/31 and that of the clase of between 500 and 1500 tons is 1/36~1/42 which is greater than that of various cargo ships recorded as 1.45~1.75. 4. On speed-length ratio of purse seiners. 111 Dong-a has the biggest value 2.94 the class of 130 tons has 2.52 the class of between 75 and 100 tons has 2.30~2.35 and the class of between 500 and 1500 tons has 1.99~2.05. 5. Turning circle of stern trawlers Pusan 404 and Haelim 3 are measured as below according to rudder angles 5$^{\circ}$, 15$^{\circ}$, 25$^{\circ}$ and 35$^{\circ}$ respectively. Advances are 11.3~13.6, 6.0~7.1, 3.6~4.8 and 2.5~3.5 times of LPP respectively. Tactial diameters are 15.2~18.6, 6.9~8.0, 4.2~4.9 and 2.9~3.5 times of LPP. Purse seiner 111 Dong-a with rudder angle 35$^{\circ}$ has a good yaw with quick responsibility since its advance is 2.2~2.3 times of LPP and since its tactial diameter is 2.0~2.1 times of LPP. 6. In full ahead going of purse seiner 111 Dong-a, it takes about 2 minutes and 10.6 times of LPP from the reverse turning its engine into full astern to the ship speed 0. In its full astern going, it takes about 1 minute and 5.1 times of LPP from the reverse turning its engine into full ahead to the ship speed 0. In its full ahead going, it takes about 2 minutes and 50 seconds and 12.3 times of LPP from stopping its engine to the dead slow ahead speed 3.2 knots.