• Fisheries and Aquatic Sciences
• /
• v.13 no.4
• /
• pp.294-299
• /
• 2010

The effects of dietary nutrient composition on compensatory growth of grower olive flounder (Paralichthys olivaceus) under different feeding regimes at suboptimal temperature were determined. Four hundred five fish weighing 271.2 g were distributed into 27 300 L flow-through tanks (15 fish per tank). Nine treatments were prepared in triplicate: fish were hand-fed with control (C) diet for 12 weeks (12WF-C); four groups of fish were starved for 1 week and then fed C, high-protein (HP), high-lipid (HL), or combined high-protein and high-lipid (HPL) diets for 11 weeks; these groups are referred to as 11WF-C, 11WF-HP, 11WF-HL, and 11WF-HPL, respectively. Four other groups of fish were starved for 2 weeks and then fed C, HP, HL, and HPL diets for 10 weeks; these groups are referred to as 10WF-C, 10WF-HP, 10WF-HL, and 10WF-HPL, respectively. Weight gain and specific growth rate of fish from 12WF-C group were greater than those of fish from 11WF-C, 11WF-HP, 11WF-HL, 10WF-C, 10WFHP, and 10WF-HL groups, but not different from those of fish from 11WF-HPL and 10WF-HPL groups. Feed-efficiency ratio of fish from 12WF-C, 11WF-HP, 11WF-HPL, 10WF-HL, and 10WF-HPL groups was higher than that of fish in 11WF-C, 11WF-HL, 10WF-C, and 10WF-HP groups. The results of this study demonstrated that grower olive flounder subjected to 1- or 2-week feed deprivation were able to achieve full compensatory growth at suboptimal temperature only when fed HPL diet.

• Clinics in Shoulder and Elbow
• /
• v.1 no.2
• /
• pp.221-229
• /
• 1998

We measured, with manual goniometer, the active and passive arc of motion of the shoulder in 31 healthy male subjects who were right-hand dominant and who ranged in age from twenty to thirty-one years. Among ten directions through the four motion plane, the range of motion on the dominant side were significantly smaller than those on the non-dominant side in the motion of six directions. We also measured the motion fraction of the glenohumeral and scapulothoracic movement using fluoroscope in 30-degree intervals of arm elevation in the scapular plane. The ratio of glenohumeral to scapulothoracic movement(θGH/θST) was 1.6 for the full range of motion in scapular plane. At the lower angles of abduction, scapulothoracic movement was slight compared with glenohumeral movement. The motion fraction of scapulothoracic joint was increased from 60-degree to 150 degree of arm angle especially between 120 to 150 degree. During arm elevation, scapula was also extended from 42 degrees to 20 degrees tilting as well as internal rotation. The measuring technique of glenohumeral to scapulothoracic movement(θGH/θST) with fluoroscopy could be applied to the simple radiographic measurement at the out-patient clinic in order to identify the pathology and recovery of shoulder motion after treatment.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.783-792
• /
• 2008

While the recent high demand for mega-tall buildings has led to the development of high-performance and high-strength steels, the requirements for architectural-structure-performance steel have been raised as engineers recognize the potential damage that an earthquake can wreak on a tall building. A 600MPa-class steel has emerged to meet such need, and many studies are currently exploring its practical applications on civil engineering works and mega-tall buildings. The available data on the horizontal-force behaviors of structures built with such new steel, however, are still insufficient. There is an urgent need to look into its design data, especially its toughness, and to compare the plastic strain ratios of column-to-beam connections using high-strength steel and regular steel. One of the first studies on the behavior of a column-to-beam connection using 600MPa-class steel (SM570 TMC), this thesis analyzes such steel's structural performance by conducting a structural test on seismic resistance on a full-scale column-to-beam welded connection with non-scallop and recommended-scallop details. Compared with the previous studies on SM490, this thesis evaluates the weldability of SM570 TMC and presents the latter's seismic design data for use in testing its practical application.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.477-486
• /
• 2020

The purpose of this study was to evaluate the effects of reconstruction filters, X-ray source trajectories and intervals in the quality of digital tomosynthesis (DT) images, and the results was clinically validated. The filtered back-projection was implemented by using Ramp, Shepp-Logan, Cosine, Hamming, Hann and Blackman filters, and the X-ray source trajectories were simulated with 1 × 36, 2 × 18, 3 × 12, 4 × 9 and 6 × 6 arrays. The X-ray source intervals were 5, 10, 20, 30 and 40 mm. The depth resolution, spatial resolution and noise of DT image were evaluated by measuring artifact spread function (ASF), full width at half maximum (FWHM) and signal-to-noise ratio (SNR), respectively. The results showed that the spatial resolution and noise properties of DT images were maximized by the Ramp and Blackman filters, respectively, and the depth resolution and noise properties of the DT images obtained with a 1 × 36 X-ray source trajectory were superior to the other trajectories. The depth resolution and noise properties of DT images improved with an increase of X-ray source intervals, and the high X-ray source intervals degraded the spatial resolution of DT images. Therefore, the characteristics of DT images are highly dependent on reconstruction filters, X-ray source trajectories and intervals, and it is necessary to use optimal imaging parameters in accordance with diagnostic purpose.

• Journal of the Korean Society for Library and Information Science
• /
• v.48 no.1
• /
• pp.27-52
• /
• 2014

The employment prospects of graduates in the Library and Information academic has largely concentrated in the field of librarianship as well as the curriculum of the academic itself. Since there are limitations in increasing the number of libraries and the available posts in the librarianship, the full-time jobs in the field are also limited. Even for the available posts in the field of librarianship, the majority is in contract based posts which does not guarantee a good working environment. The purpose of this research is to make policy implications to improve the employment rates of librarians. The main research methods include literature review of the previous studies and available statistical data, and a questionnaire targeting students and librarians. The targeting policy implications can be categorized into 4 factors, including, as supply side, improvements in the qualification of librarian certificate, in training for librarians, and as demand side, laws on library employment, and improvement of library services for co-operatives. There are 15 detailed strategies to support the 4 factors. For the improvement of strategies in library related laws, the following elements will be considered; supporting system for temporary jobs, the title of librarian post and the library itself, and librarian placement criteria in terms of its realization and mandatory, and obligations in library evaluation. The Council discussions propose the expansion of librarian award system, provision of information systems for librarian jobs, and developments in promotional materials and their deployment for librarians.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.609-619
• /
• 2004

An investigation was conducted on the activities around Europe in order to solve the problem of the thermal bridging of steel studs, which had caused a significant disadvantage. This study included the following: diminishing the contact area between the studs and the sheathing, lengthening the heat transfer route, replacing the steel web with a less conductive material, and placing foam insulation in locations where the thermal shorts are most critical. Although energy efficiency is usually the focus of such foreign cases because their stud application is mostly limited to low-rise residential buildings, both structural and thermal performance are taken into consideration in this study because these target middle-story buildings. A hybrid stud composed of steel and polymer was also developed. This hybrid stud, which is 150 SL in size, is made of a galvanized steel sheet (SGC58) and a glass fiber reinforced polymer (GFRP) withepoxy bonding. A total of 32 specimens were manufactured. Its parameters comprise two types of connection detail,s: the thickness of steel (1.0mm and 1.2mm) and of the GFRP (4mm-4ply and 6mm-6ply), and the ratio of the length to the depth (L/D = 3, 6, 9, 12). Steel stud specimens with the same conditions were compared to the hybrid stud. The test revealed that in the case of the steel specimen with a thickness of 1.0mm, the maximum load of hybrid studs increased an average of 1.62 times comparedto that of the steel stud. In the case of the steel specimen with a thickness of 1.2mm, on the other hand, the average increase was 1.46times. All specimens showed full composite action until the collapse.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1729-1737
• /
• 2010

This study was conducted to establish the optimal medium condition for the animal probiotic Lactobacillus plantarum by using onion juice. Cell yield and antioxidant activity increased in proportion to high additive levels of onion juice in medium. Onion juice, sucrose and yeast extract were selected as media ingredient factors and the effects of their mixed ratio in medium were evaluated. The full factorial design consisted of 24 experimental runs and was employed to estimate the main effects of the factors and their interactions. Significant positive effects on cell yield and antioxidant activity was shown with yeast extract and onion juice, respectively. Significant interaction was found only between sucrose and yeast extract in antioxidant activity. Finally, we selected an optimal medium that was composed of (g/l) onion juice, 600; sucrose, 15; yeast extract, 5. The efficiency of this optimum medium was estimated by using a 5 l jar fermenter. As a result, the maximum cell yield was $9.7\;{\log}_{10}$ (CFU/ml) at 12 hr. Cell yield at the end of incubation (20 hr) was $8.9\;{\log}_{10}$ (CFU/ml) and it was very similar with the predicted value, $9.0\;{\log}_{10}$ (CFU/ml). Antioxidant activity of culture was maintained at about 60~65% during all incubation time, resulting in a higher-than-predicted activity of 47.1%.

• Fire Science and Engineering
• /
• v.24 no.3
• /
• pp.131-138
• /
• 2010

Experimental and numerical studies were conducted to investigate the thermal and chemical characteristics of heptane fires in a full-scale ISO 9705 room. Representative fire conditions were considered for over-ventilated fire (OVF) and under-ventilated fire (UVF). Fuel flow rate and doorway width were changed to create OVF and UVF conditions. Detailed comparisons of temperature and species concentrations between experimental and numerical data were presented in order to validate the predictive performance of FDS (Fire Dynamic Simulator). The OVF and UVF were explicitly characterized with distributions of temperature and product formation measured in the upper layer, as well as combustion efficiency and global equivalence ratio. It was shown that the numerical results provided a quantitatively realistic prediction of the experimental results observed in the OVF conditions. For the UVF, the numerically predicted temperature showed reasonable agreement with the measured temperature. The predicted steady-state volume fractions of $O_2$, $CO_2$, CO and THC also agreed quantitatively with the experimental data. Although there were some limitations to predict accurately the transient behavior in terms of CO production/consumption in the UVF condition, it was concluded that the current FDS was very useful tool to predict the fire characteristics inside the compartment for the OVF and UVF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2A
• /
• pp.172-178
• /
• 2011

In this paper, the performance of bit interleaved of coded and modulation(BICM) module of the second generation of digital terrestrial television broadcasting system(DVB-T2) is evaluated with the help of computer simulation. The frame error rate performance is studied in AWGN, Rayleigh fading and 15% erasure channels. In addition, iterative receiver is considered that exchanges extrinsic information between the rotated demapper and the LDPC decoder. Through the simulation it is observed that under the flat fading Rayleigh channel, about 1.2dB gain at FER of $10^{-4}$ is introduced when rotated constellation and iterative demapping and decoding are employed. Under the 15% earasure channel, rotated constellation gives performance gain of about 5dB at BER of $10^{-4}$ and when IDD is applied, additional performance gain of about 3dB can be achieved.

• Journal of Veterinary Clinics
• /
• v.28 no.3
• /
• pp.310-313
• /
• 2011

A 6-year-old female Shih-tzu dog was referred with left elbow joint mass associated with weight bearing lameness. Ultrasonography demonstrated an encapsulated hyperechoic mass at the left elbow joint. Radiography was performed on elbow joint, chest, and abdomen, but there was no evidence of metastasis. Clinicopathologic examination revealed the existence of neoplastic cells with anisocytosis, pleomorphism and increased nuclear-cytoplasmic ratio. The left forelimb was amputated for cure. Histopathological examination diagnosed the mass as a malignant peripheral nerve sheath tumor. During the 4 weeks follow-up, the patient showed full remission and adopted to walk with remaining three legs. Thereafter, the tumor recurred after 5 months of first surgery at the operation site and other two cutaneuos regions. Cytology test revealed the mesenchymal originated tumor cells with malignancy. These tumors were surgically removed and histopathological examination of the resected tissue revealed the recurrence of primary tumor and metastasis. Metronomic therapy with cyclophophamide (10 mg/$m^2$, PO, sid) and piroxicam (0.3 mg/kg, PO, sid) had been adopted for 5 months. At 26 months of follow up after the first surgery, the dog alive with satisfactory quality of life. Aggressive surgical resection with metronomic chemotherapy should be the most effective treatment for malignant peripheral nerve sheath tumor.