• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.365-374
• /
• 2010

The ash reduction effects and fuel property changes of spent mushroom substrates by acid solution extraction, and the production possibilities of wood pellet fuel using them were studied. The ash weight of spent Pleurotus eryngii substrates was reduced from 8.81%(w/w) to 3.33%(w/w), and calorific value was increased from 3,958.3 kcal/kg to 4219.2 kcal/kg when extracted with a mixture of Acetic acid 2%(w/w) and Anhydrous citric acid 1%(w/w) in condition of liquid ratio 1:8, extraction temperature $55^{\circ}C$ and extraction time 180 min. The ash weight of spent Flammulina velutipes substrates was reduced from 14.91%(w/w) to 4.07%(w/w), and calorific value was increased from 4,190.3 kcal/kg to 4,219.2 kcal/kg when extracted with a mixture of Acetic acid 3%(w/w) and Anhydrous citric acid 1%(w/w) in condition of liquid ratio 1:8, extraction temperature $65^{\circ}C$ and extraction time 180 min. The ash weight of spent Pleurotus osteratus substrates was reduced from 3.31%(w/w) to 0.59%(w/w), and the smallest reduction was in calorific value from 4,558.6 kcal/kg to 4,216.2 kcal/kg when extracted with a mixture of Acetic acid 1%(w/w) and Anhydrous citric acid 1%(w/w) in condition of liquid ratio 1:8, extraction temperature $65^{\circ}C$ and extraction time 180 min.

• Journal of Korea Foresty Energy
• /
• v.22 no.2
• /
• pp.54-59
• /
• 2003

Recently, densified pellet fuel from wood biomass is widely used at North America and Europe as a regenerable and clean carbon neutral bioenergy. High-pressure compaction of sawdust of Hyunsasi-poplar (Populus alba ${\times}$ P. glandulosa) to form a densified fuel was studied. Calorific and elemental analysis were carried out to assess Hyunsasi-poplar clones as fuels. Hot-press process was adopted for compaction of sawdust and compaction was performed under temperature from 100 to 180$^{\circ}C$, at pressure of 250 to 1000 kgf/$\textrm{cm}^2$, and for 2.5 to 10 minutes. Densified fuels were evaluated by its oven-dry density and fines after 5-minute shaking test. The target density and fines of densified fuels were over 1.2 g/$\textrm{cm}^2$ and below 0.5%, respectively. When the press-temperature is over 160$^{\circ}C$, densified fuels with density eve. 1.2 g/$\textrm{cm}^2$ and with fines below 0.5% can be produced. And the pressure over 750 kgf/$\textrm{cm}^2$ was effective for this production. It was found that the optimum press condition for preparation of densified fuel was 180$^{\circ}C$ -1000 kgf/$\textrm{cm}^2$ minutes.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.381-389
• /
• 2015

In this study, the effects of moisture content and particles size of ground particles of torrefied larch chips on the pelletizing process were investigated depending on torrefaction conditions ($220^{\circ}C$-50 min, $250^{\circ}C$-50 min, $250^{\circ}C$-120 min). The moisture content in the torrefied chip decreased to 0.69~1.75%, while ash content and calorific value increased compared to untreated chip. In addition, weight loss significantly increased during torrefaction due to hemicellulose degradation. The carbon content in torrefied larch chip increased compare to untreated larch chip, while the hydrogen and oxygen contents decreased. The lignin and glucan contents in torrefied larch chip increased with increasing severity of the torrefaction condition, while hemicellulose decreased. In the particle size distribution of ground particles of torrefied larch chip, larch torrefied at severe conditions was found to produce smaller particles (~1 mm) than that of the larch torrefied at mild conditions. Macropore (over $500{\AA}$) in the torrefied particle was produced during torrefaction. During the pelletizing using ground particles of torrefied larch chip, the pressure needed in pelletizing decreased and pellet length increased with increasing moisture content, regardless of the particle size.

• Journal of Climate Change Research
• /
• v.4 no.1
• /
• pp.41-49
• /
• 2013

Recent findings have revealed that black carbon is one of the substantial materials affecting climate change along with greenhouse gases. Usually, black carbon is generated by incomplete combustion of biomass and deposited on snow and ice surface, resulting in increasing adsorption of radiant energy and accelerating ice melting. However, it is still questionable what the emission characteristics of black carbons from biomass combustion is. We investigated the emission characteristics of black carbon generated from a wood stove in this study. We found that the emission of black carbon was highly dependent upon combustion temperature and the amount of combustion air supplied. The emission factors were 1.01 g-BC/kg-Oak for fireplace wood burning under incomplete combustion, 0.37 g-BC/kg-Oak for fireplace wood burning under complete combustion and 0.29 g-BC/kg-Oak for small wood-stove burning.

• Journal of the Korean Home Economics Association
• /
• v.36 no.6
• /
• pp.123-132
• /
• 1998

This paper is a part of "The Study of the Traditionla Korean Ethnic Farmhousing in Yanbian, China" The purpose of this study is to investigate the facilities and equipments of the traditional farmhouse in the villages of Lungching China. The data is collected from 124 households in the villages based on the survey conducted using questionnaire and photograph. The major findings are: 1) The people in farmhouse use wood as a fuel for cooking and the method of cooking is traditional style using their iron pots. 2) Heating system of the house is ondol type of heating using. wood which is also traditional type. This means that the floor heating of the house and cooking food can be carried out simultaneously. 3) Even though pump system and running water system are the two kinds of water supply that are available in the villages, majority of people use pump system. Many houses have no drainage facilities but few houses have got bad drainage system. 4) From the planning stage of the farm house facilities and equipments for ventilation is not considered and hence it is not provided in most of the houses. 5) Farmhouses are oriented to the south and the windows and the doors are covered either with viny1 or cloth during winter time effecting the lighting system of the house. 6)Many of the houses use incandescent lights. But the switchs and the electric Outlets are short in number. 7) Sanitation facilities are worst equipped compared to other facilities present in Lungching villages of China. of China.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.264-269
• /
• 2013

Purpose: This study was carried out to develop a classification index and grade levels to rate agricultural heaters for energy efficiency classification. Methods: The classification index was developed mainly by taking simplicity of calculation and easy access to relevant data into consideration. The grade levels were developed on the basis of a 5-grade classification system in which graded heaters are to be normally distributed over the grades. The value of each grade level were determined in terms of the classification index values calculated using the published performance data of agricultural heaters tested at the FACT in Korea over the past 12 years. Results: The thermal efficiency of agricultural heaters based on the enthalpy method was proposed as a reasonable classification index. The grade levels were proposed in equation form for three types of agricultural heaters: fossil fuel heaters, wood pellet heaters and wood pellet boilers. A reasonable energy efficiency classification of agricultural heaters could be performed using the proposed classification index and grade levels. Conclusions: It is expected that energy saving programs will be extended to agricultural machines in the near future. The classification index and grade levels to rate agricultural heaters for energy efficiency classification were developed and proposed for such near future to come.

• Journal of ILASS-Korea
• /
• v.16 no.3
• /
• pp.152-158
• /
• 2011

Fast pyrolysis of biomass is one of the most promising technologies for converting biomass to liquid fuels. The pyrolysis oil, also known as the bio crude oil (BCO), have been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of BCO in diesel engine requires modifications due to low energy density, high water contents, low acidity, and high viscosity of the BCO. One of the easiest way to adopt BCO to diesel engine without modifications is the use of BCO/diesel emulsions. In this study, a diesel engine operated with diesel, bio diesel (BD), and BCO/diesel emulsion was experimentally investigated. Performance and emission characteristics of a diesel engine fuelled by BCO/diesel emulsion were examined. Results showed that stable engine operation was possible with emulsion and engine output power was comparable to diesel and bio diesel operation. Long term validation of adopting BCO in diesel engine is still needed because the oil is acid, with consequent problems of corrosion especially in the injection system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.21-22
• /
• 2019

In order to prevent global warming according to fossil fuel use, countries around the world are making efforts through the Kyoto Protocol and the Paris Climate Change Convention. In addition, in order to prepare for high oil prices, researches such as the development of various renewable energy are being conducted. At present, the domestic production rate of energy sources in Korea is low at 18.1%, and power plants using forest biomass are being constructed to meet the domestic situation where 63% of the land is a forest. In 2015, the global production of wood pellets, a raw material for wood-based biomass power generation, was 28 million tons, up 7.7% from 2014, and has increased tenfold over the last decade. This is a result of increased demand for biomass. Korea is also increasing every year. However, biomass fly ash, an industrial by-product generated by biomass energy generation, is now being disposed of entirely, and there is little research to utilize it. Therefore, this paper will use biomass fly ash, an industrial by-product, which is currently being discarded due to a lack of separate treatment methods, as an admixture concept to contribute to solving environmental problems, developing new admixtures, improving quality, and seeking recycling plans.

• Advances in Energy Research
• /
• v.4 no.3
• /
• pp.223-237
• /
• 2016

The excess use of conventional sources of energy by the industries and power sector result in acute shortage of energy produced by fossil fuel. To overcome this energy crisis, biomass feedstock is used to produce syngas or producer gas. For cleaning the dust particle present in the producer gas cyclone separators are largely used. In this paper we investigate the performance parameters of cyclone separator mainly efficiency and pressure drop for different feedstock. Cyclone performance has been evaluated based on experimentation and empirical approach using Leith and Licht model. The same has also been calculated by using turbulent RSM in Ansys Fluent for Wood and Coconut shell feedstock. Experimental results show that using feed stock with 10 % Calcium oxide (CaO) by weight, the efficiency of cyclone got reduced from 71.87% to 70.75% for wood feed stock, whereas in case of coconut shell, the cyclone efficiency got reduced from 78% to 73.44%. It is also seen that Leith and Licht model and Reynolds stress model (RMS) predicts very close to the particle collection efficiency evaluated by using experimental data.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.449-456
• /
• 2016

This study was aimed to quantify the amount of carbon dioxide emissions and to suggest suitable plans which consider the carbon emission reduction in the manufacturing process of the domestic structural glued laminated timber. Field investigation on two glued laminated timber manufacturers was conducted to find out material flow input values such as raw materials, transportation, manufacturing process, and energy consumption during manufacturing process. Based on the collected data and the relevant literatures about life cycle inventory (LCI), the amount of carbon dioxide emission per unit volume was quantified. Results show that the carbon dioxide emissions for sawing, drying and laminating process are 31.0, 109.0, 94.2 kg $CO_2eq./m^3$, respectively. These results show 13% lesser amount of total carbon dioxide emissions compared with the imported glued laminated timber in Korea. Furthermore, it was decreased about 37% when the fossil fuel would be replaced with biomass fuel in drying process. Findings from this study is effectively used as the basic data on the life cycle assessment of wooden building.