• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.97-109
• /
• 2019

Physical conditions play vital role on the mechanical properties of frozen soil, especially for the temperature and moisture content of frozen soil. Subsequently, they influence the subsidence and stress law of permafrost layer. Taking Jiangcang No. 1 Coal Mine as engineering background, combined with laboratory experiment, field measurements and empirical formula to obtain the mechanical parameters of frozen soil, the thick plate mechanical model of permafrost was established to evaluate the safety of permafrost roof. At the same time, $FLAC^{3D}$ was used to study the influence of temperature and moisture content on the deformation and stress law of frozen soil layer. The results show that the failure tensile stress of frozen soil is larger than the maximum tensile stress of permafrost roof occurring in the process of mining. It indicates that the permafrost roof cannot collapse under the conditions of moisture content in the range from 20% to 27% as well as temperature in the range from $-35^{\circ}C$ to $-15^{\circ}C$. Moreover, the maximum subsidence of the upper and lower boundary of the overlying permafrost layer decreases with the increase of moisture content in the range of 15% to 27% or the decrease of temperature in the range of $-35^{\circ}C$ to $-15^{\circ}C$ if the temperature or moisture content keeps consistent with $-25^{\circ}C$ or 20%, respectively.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.51-52
• /
• 2006

This study was progressed on the freezing behavior of waste water in relation to freeze concentration method useful to waste water treatment system of small and middle size and which can re-use purified water. The object of this experiment is comparing a pollutant contain of the frozen layer and of an aqueous solution by cooling wall temperature, a flow field effect and a initial thickness of frozen layer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.474-479
• /
• 2005

Experimental and theoretical studies of internal cavity pressure during injection molding of a spiral tube cavity were carried out. The frozen layer thickness and the evolution of internal cavity pressure were calculated using a commercial software (C-MOLD). The evolution of the internal cavity pressure was recorded during injection molding of polystyrene into a spiral tube mold. To explain the differences observed between the calculated and measured internal cavity pressure, a pressure correction factor (PCF) was introduced based on the plane stress theory. This factor was determined by analyzing the stress state in the melt and calculating the frozen layer thickness near the mold wall. The corrected and experimental pressures have been compared to validate the applicability of the pressure correction factor.

• Geomechanics and Engineering
• /
• 제15권2호
• /
• pp.783-791
• /
• 2018

In consideration of the mesoscopic structure of soil-rock mixtures in which the rock aggregates are wrapped by soil at normal temperatures, a two-layer embedded model of single-inclusion composite material was built to calculate the shear modulus of soil-rock mixtures. At a freezing temperature, an interface ice interlayer was placed between the soil and rock interface in the mesoscopic structure of the soil-rock mixtures. Considering that, a three-layer embedded model of double-inclusion composite materials and a multi-step multiphase micromechanics model were then built to calculate the shear modulus of the frozen soil-rock mixtures. Given the effect of pore structure of soil-rock mixtures at normal temperatures, its shear modulus was also calculated by using of the three-layer embedded model. Experimental comparison showed that compared with the two-layer embedded model, the effect predicted by the three-layer embedded model of the soil-rock mixtures was better. The shear modulus of the soil-rock mixtures gradually increased with the increase in rock regardless of temperature, and the increment rate of the shear modulus increased rapidly particularly when the rock content ranged from 50% to 70%. The shear modulus of the frozen soil-rock mixtures was nearly 3.7 times higher than that of the soil-rock mixtures at a normal temperature.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1250-1259
• /
• 2001

This study was experimentally performed to investigate sea water freezing behavior along parallel cooled plate with bubbly flow The experiments were carried out for a variety of parameter, such as sea water velocity, air-bubble flow rate, and cooled-plate temperature. The shape of freezing layer, freezing rate and salinity of frozen layer were observed and measured. It was found that the experimental parameters gave a great influence on the freezing rate and the salinity of the frozen layer.

• 한국지반공학회논문집
• /
• 제30권10호
• /
• pp.67-80
• /
• 2014

동시베리아 지역에 분포하는 영구 동토층의 두께는 평균적으로 200~500m이며, 기온에 따라 지반물성이 변화하는 계절동토층이 지역에 따라 지표면에서 약 0~4m까지 형성되어 있다. 계절 동토의 전단파 속도는 흙의 종류에 따라 여름에는 약 80m/s에서 겨울철 동결상태에서는 약 1500m/s까지 크게 변이한다. 융해시 계절 동토층과 하부의 영구 동토층 사이의 전단파 속도 차이 때문에 매우 큰 임피던스가 발생하고 이로 인해 지진파가 증폭될 수 있다. 특히, 경계면에서 큰 변위가 발생할 수 있으므로 내진설계 시 이의 영향을 고려해야 한다. 본 연구에서는 계절 동토층의 두께와 전단파 속도 변화에 따른 영향이 지반 증폭특성 및 지반변형에 미치는 영향을 규명하기 위하여 1차원 등가정적 지반응답해석을 수행하였다. 동시베리아의 Yakutsk와 Chara 지역에 대한 지질보고서를 바탕으로 지반주상도를 선정하였으며 입력지진파의 영향을 증명하기 위해 총 20개의 계측지진파를 사용하였다. 계절 동토층의 두께가 증가할수록 증폭현상이 크게 발생하였으며, 계절동토층과 영구 동토층 사이의 전단파 속도 차이가 클수록 증폭계수가 증가하는 것으로 나타났다. 특히 동시베리아 지역에 넓게 분포되어 있는 유기질토인 토탄은 증폭에 큰 영향을 미치므로 설계시 이를 반드시 고려해야 할 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.225-245
• /
• 2016

Settlement of foundations in permafrost regions primarily results from three physical and mechanical processes such as thaw consolidation of permafrost layer, creep of warm frozen soils and the additional deformation of seasonal active layer induced by freeze-thaw cycling. This paper firstly establishes theoretical models for the three sources of settlement including a statistical damage model for soils which experience cyclic freeze-thaw, a large strain thaw consolidation theory incorporating a modified Richards' equation and a Drucker-Prager yield criterion, as well as a simple rheological element based creep model for frozen soils. A novel numerical method was proposed for live computation of thaw consolidation, creep and freeze-thaw cycling in corresponding domains which vary with heat budget in frozen ground. It was then numerically implemented in the FISH language on the FLAC platform and verified by freeze-thaw tests on sandy clay. Results indicate that the calculated results agree well with the measured data. Finally a model test carried out on a half embankment in laboratory was modeled.

• 터널과지하공간
• /
• 제11권4호
• /
• pp.362-367
• /
• 2001

지반에서 겨울에 발생할 수 있는 단단한 상부층은 방진벽의 진동차단성능을 변화시킬 수 있다. 본 논문은 상부에 단단한 층이 존재하는 층진 지반(layered soil)에서 표면파의 진동전파와 강성 방진벽의 진동차단 성능에 관한 것이다. 연구는 이차원문제로, 경계요소법을 이용한 수치해석적 방법에 의해 수행되었으며, 진동원은 수직방향으로 조화가 진을 받는 줄기초이다. 검토된 지반은 세 가지로, 균질의 반무한 지반과, 단단한 상부층의 두께를 달리하는 두 개의 지반이다. 단단한 상부층을 갖는 지반에서는 굴절의 지반과 비교하여 아주 커다란 진폭의 감소가 나타났으며, 진동전파 속도의 경우, 물성치에 의해 계산으로 구해지는 진동전파 속도만큼의 크기가 나타나지 않았다. 더욱이 동결지반에서의 진폭은 비동결지반에서 보다 거리에 따라 아주 작은 값이 구해졌다.

• 한국항해항만학회지
• /
• 제37권2호
• /
• pp.129-135
• /
• 2013

동결농축폐수처리의 기술은 열역학적 효율이 높고 에너지 소비량이 작아 중소규모로 적합하며, 용수 재활용과 융해열의 냉열 재이용이 가능한 장점을 가지고 있다. 본 연구에서는 폐수 처리효율이 높은 동결농축폐수처리장치의 개발을 위해 수직원관 형태의 제빙관을 대상으로 염화나트륨수용액을 이용한 기초 실험을 통해 냉각면 온도, 기포 분사 방법에 따른 분리 성능을 확인 후 대표적 중금속인 Pb, Cr 수용액을 대상으로 냉각면 온도, 기포 직접 분사, 과냉각을 방지하기 위한 용질을 포함하지 않은 초기 빙층 두께의 영향에 따른 중금속 분리 성능을 실험 통해 확인하였다. 실험결과 두 수용액에서 모두 냉각면의 온도가 낮을수록 동결층의 성장속도가 빨라지고 용질의 분리효율이 저하되었다. 기포를 분사하는 방법 중에는 환모양의 노즐을 통해 동결계면에 직접 분사하는 방법이 원통벽면을 통해 간접 분사하는 것 보다 분리효율이 높게 나타났으며, 초기 빙층의 두께에 따른 실험에서는 1mm 보다는 5mm의 두께에서 분리효율이 더 우수한 것으로 나타났다.

• 농업과학연구
• /
• 제48권4호
• /
• pp.739-751
• /
• 2021

The thawing process is usually essential for imported pork because this product is typically distributed frozen. Consumers prefer fresh pork because discoloration, nutrient spills, and microbial contamination are high during the thawing process. The illegal act of selling frozen pork by disguising it as fresh pork through various methods can occur for the benefit of the difference in the sales price. However, there is some difficulty in securing systematic and objective data, as sensory tests are generally performed on imported pork. In the experiment conducted here, the electrical conductivity and dielectric properties of pork neck and pork belly products were measured. The amounts of change before and after freezing were compared through a statistical analysis, and a new method for determining frozen meat was proposed based on the analysis results. The weight was reduced compared to that before freezing due to the outflow of drips from the thawing process, but there was no difference in the drip loss level due to the thawing method. Vacuum packaging was found to lead to more drip loss than regular packaging, but the difference was not statistically significant. Frozen pork neck meat can be determined by measuring the electrical conductivity in the lean parts and the dielectric characteristic in the fatty parts. Frozen pork belly is determined by measuring the dielectric constant of the part closest to the outer fat layer.