• 한국환경과학회지
• /
• 제12권11호
• /
• pp.1137-1144
• /
• 2003

To provide evidence that the changes in oceanic environmental conditions are useful indices for predicting stock structure and distribution of the Pacific saury (Cololabis saira), the body length compositions and catch per unit fishing effort were examined in relation to the sea surface temperature(SST) anomalies in the Tsushima Warm Current(TWC) region. The size of the fish became larger(smaller) than the average in the same size category during the season of higher SST(lower SST) as opposed to the normal SST. The year-to-year changes in body size caused by the changes in the environmental conditions led the stock to be homogeneous during the period of high stock level from the late 1950s to early 1970s and in the 1990s. The changes in body size manifested by higher(lower) occurrence rates of larger (smaller) sized groups in relation to temperature anomalies suggest that the changes in the environmental conditions affect the distribution and the structure of the stock in the TWC region. Therefore, if the SST anomaly derived from satellite data is large enough in the early spring months(Mar. or Apr.), it is possible to predict whether or not sea temperature will be favorable for large sized groups of saury at normal or slightly earlier time of commencement of the fishery in spring(Apr.∼June).

• 한국연소학회지
• /
• 제6권1호
• /
• pp.1-6
• /
• 2001

To evaluate the effect of lobed structure on pollutant emission, an experimental study examines NOx and CO emissions associated with four burner geometries, such as a conventional circular burner and three lobed ones. Rapid mixing allowed by the lobed burner to produce lean premixed flames, with narrower flame stability diagram than for the conventional circular one. Conventional circular burner of wide and uniform burner rim has an advantage of flame stabilization. Correlation on fuel discharge velocity for flame blowout should be included a variable related to the wall effect of the burner. NOx emission reduces by about 5% at the burner with lobed structure in fuel discharge side compared to conventional circular one. This is due to lower flame temperatures through flame elongation and increased radiative heat losses, caused by partially luminous flame in flame front. Meanwhile, at the burner with lobed structure in air discharge side and both fuel and air discharge sides, NOx emission somewhat increases with reduced radiative heat losses in spite of flame elongation. Therefore, the rapid mixing by lobed structure does not always have an advantage on NOx reduction.

• Structural Engineering and Mechanics
• /
• 제83권1호
• /
• pp.53-66
• /
• 2022

The main objective of the present research was investigating the effects of a floating wave barrier installed in front of an offshore jacket structure on the wave height, base shear, and overturning moment. A jacket model with the height of 4.55 m was fabricated and tested in the 402 m-long wave flume of NIMALA marine laboratory. The jacket was tested at the water depth of 4 m subjected to the random waves with a JONSWAP energy spectrum. Three input wave heights were chosen for the tests: 20 cm, 23 cm, and 28 cm. Two different cross sections with the same area were selected for the wave barrier: square and rhombus. Results showed that the average decrease in the jacket's base shear due to the presence of a floating wave barrier with square and rhombus cross section was 24.67% and 34.29%, respectively. The use of wave barriers with square and rhombus cross sections also resulted in 19.78% and 33.11% decrease in the jacket's overturning moment, respectively. Hence, it can be concluded that a floating wave barrier can significantly reduce the base shear and overturning moment in an offshore jacket structure; and a rhombus cross section is more effective than an equivalent square section.

• 건축역사연구
• /
• 제32권3호
• /
• pp.31-38
• /
• 2023

Most of the changes found on the toi-maru of the Sang-chun-heon Historic House indicate that the upper structure of the toi-maru of the late Joseon Dynasty houses where toi-bo was installed was not completed in an instant. Toi-maru with stud is especially typical in 3-Dori type Structure, and can be found in many historic houses in Yang-dong Village, where the many 3-Dori type Structure is located. This type can be interpreted as the intermediate type that began at the eaves was settled as a toi-maru with a separate toi-bo. It seems that the toi-maru in front of the on-dol room at the time of the construction of the Sang-chun-heon historic house would not have been the same as it is now. The members dividing the on-dol room, the walls, and the various incomplete appearances seen in the window composition can be construed as traces of the change. The fact that all three types of houses that occurred during the spread of toi-maru after the mid-Joseon Dynasty can be examined can be added to the existing evaluation of cultural property houses in Yang-dong Village.

• 건축역사연구
• /
• 제22권2호
• /
• pp.21-30
• /
• 2013

This study is related to excavation from ruins the memorial structure within the Jeongreung royal tomb. There are experimental assertion on the basis of results of the excavation, historical records. The location of the memorial structure is identified in picture of Sunwonbogam(선원보감), records of Chunkwantongho(春官通考). The memorial structure have 6 rooms where lay in 250 steps(步) from the south of Hongjeonmun gate, lotus pond lay in southeast of the structure recorded on Chunkwantongho that's guide book to manners. It's matched in the location as result of excavation. The building site consists of main house(윗채), outhouse(아래채) that's stationed in stepped. It seems that main house as the memorial structure have 6 rooms. It's used as outhouse for facilities attached to the main. It's characterized the memorial structure within the Jeongreung royal tomb that's stationed main house, outhouse in stepped it using natural ground. It's estimated that it's tried to conservation for building site, fence etc. in next several time. With regard to constructing time of the structure, traces involved to first construction is simple: 2 chimneys in flower bed, fence, a part of stone elevation, drains by using rectangular stone. It shows that the building site had been reconstructed or renovated during Gho-jong King 37s year of the Choson dynasty(A.D.1900). It seems that the memorial structure during approximately 300 years in existence from Hyeon-jong King 10s year of the Choson dynasty(A.D.1669) to the late 1960s.

• 보존과학회지
• /
• 제8권1호
• /
• pp.40-50
• /
• 1999

백제시대의 대표적 문화유적인 무령왕릉의 보존대책을 제시하기 위한 벽체 거동 관측, 지하 수관측, 비파괴 물리탐사 등의 지반공학적 연구를 실시하였다. 무령왕릉의 구조거동은 전체적으로 전실쪽인 남쪽방향으로 일어나며 동측 벽 및 서측 벽은 바깥쪽으로 미약한 거동을 보여 구조안전에 무제가 있는 것으로 판단된다. 왕릉의 구조거동은 우기에는 그 변위가 건기의 약 2배에 달하는 것으로 판단되어 지반이 침투수에 노출되는 우기에는 고분의 구조안전에 심각한 문제가 있는 것으로 판단되며, 또한 무령왕릉의 벽체 거동의 현저한 반응은 왕릉내부의 온도변화와 강수에 기인되는 것으로 판단된다. 그러므로 왕릉 부지내로의 침투수를 방지하여야 하며 또한 고분내부를 항온 상태를 유지할 필요가 있다 주된 강우의 침투경로는 왕릉상부의 누수방지용 강회다짐의 균열현상 때문으로 확인되므로 효과적인 누수 방지층의 보강이 시급한 것으로 판단된다. 무령왕릉 상부의 누수방지층에서 발견되는 다수의 균열은 주로 북서쪽과 남동쪽에 집중되어 일정방향의 장력의 존재를 지시하며 이는 무령왕릉의 벽체거동 방향과 일치하고 있다. 이러한 사실은 구조 변형에 대한 대책이 없는 한, 새로운 시공을 하여도 균열이 재발될 것을 예측케한다. 무령왕릉의 보존을 위한 보수대책은 남쪽 방향으로의 벽체 거동을 저지하는 구조안전대책과 누수방지대책이 가장 중요하다. 그러므로, 무령왕릉의 관람용 전실을 원래대로 복구하여 구조변형 요인을 제거한 후 누수방지층의 보강공사가 필요하다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제16권1호
• /
• pp.57-65
• /
• 1993

Asymetric system have been introduced in these years by KODAK company nam of Insight system for the purpose of improve the chest image. We have had a problem of chest radiology that it is very difficult to visualize the lung field and modiastinal region at one shot. That's why we are the RT using the technique of high voltage hard quality radiography in chest radiography. Also it is known the c-type wide latitude film can lift up the density of mediastinal structures. Authors investigated the photographic characteristics and physical structure of Insight system. Method 1. Investigated the structure of Emulsion layer. Calculated the particle size of Insight system using SEM(Scanning Electron Microscope). 2. Photographic characteristics has been compared the Insight system with the ortho KM/MG combination in $60{\sim}120kV$ range. Results 1. The particle size of backside film were investigated about 2 times larger that of front side film. 2. The front and backscreen's thickness ratio was detected 1 : 3.87, that the backscreen's thickness was thicker than frontscreen. 3. At the view point of photographic characteristics the frontside of insight system make up the contrast, backside make up the density at low exposure lesion.

• 한국소음진동공학회논문집
• /
• 제22권1호
• /
• pp.22-28
• /
• 2012

While a dash panel component, close to passengers, plays a very important role to protect heat and noise from a power train, it is also a main path that transfers vibration energy and eventually radiates acoustic noise into the cavity. Therefore, it is important to provide optimal design schemes incorporating sound packages such as a dash isolation pad and a floor carpet, as well as structures. The present study is the extension of the previous investigation how design variables affect sound radiation, which was carried out using the simple plate and framed system. A novel FE-SEA hybrid simulation model is used for this study. The system taken into account is a dash panel component of a sedan vehicle, which includes front pillars, front side members, a dash panel and corresponding sound packages. Design variables such as panel thicknesses and sound packages are investigated how they are related to two main NVH indexes, sound radiation power(i.e. structure-borne) and sound transmission loss(i.e. air borne). In the viewpoint of obtaining better NVH performance, it is shown that these two indexes do not always result in same tendencies of improvement, which suggests that they should be dealt with independently and are also dependent on frequency regions.

• 한국농촌건축학회논문집
• /
• 제15권4호
• /
• pp.35-42
• /
• 2013

The study aims to investigate general characteristics of Jae-sil from an architectural perspective by grasping location, deployment, structure, and plan composition based on existing inhabited conditions in Jeollabukdo. Results derived from the study are as follows. First, the location of Jae-sil is classified into mountainous and village types, and the two types showed a similar distribution. The village type showed the most distribution in the foot of a mountain in the rear of village, while the mountainous type is close to graveyard. The Jae-sil were mostly exposed to south, southeast, and southeast, which was not significantly different from residence. For deployment of the Jae-sil, a "二" shaped house, where main quarter and gated building are parallel located, can be common, indicating that additional attached building is less required. Second, for the platform out of structural components, coursed masonry was conducted by using natural rocks, and placed were a prop on the platform, first line on processed foot stone, and others on natural foot stone. For pillar, front line round columns, while others square columns. The binding type of the upper part of pillar is dominated by jangyeosujang and sorosujang. For wooden frame structure, 5ryangs were the most distributed, and out of these, 1goju 5ryang was the most generally used. For a roof part, it was composed with gambrel roof with single eave, and the roof was constructed by placing traditional Korean tile roof on the top. Third, for a size of Jae-sil out of plan composition, although the facade and the side of it were presented in a diverse manner, 4 facade rooms and 1.5 side rooms were the most frequently presented, and all Jae-sil were equipped with front ceremonial space. For spatial composition of Jae-sil, main floored hall is placed at the center, and each room is placed on the left and right side to secure space for ancestral rite for participants of it, and for a house with 5 rooms or more, it shows that main floored hall and rooms are weighted from side to side.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.702-705
• /
• 2011

고효율 다결정 태양전지 제작의 방향을 제시하기 위해 PC1D 프로그램을 이용하여 전, 후면 재결합 속도, 소수 캐리어 확산거리, 접합깊이, 에미터 층 면저항, 후면 전계층이 미치는 영향을 조사하였다. 최적화된 전지 파라미터는 후면 재결합 속도 1000 cm/sec, 베이스 층에서의 소수 캐리어 확산거리 50 [${\mu}m$], 전면 재결합 속도 100 [cm/sec], 에미터 층 면저항 $100{\Omega}/\Box$, 후면 전계층 두께 및 도핑 농도는 각각 0.5 [${\mu}m$]와 $5{\times}10^{19}\;cm^{-3}$로 조사되었다. 특히 19.8% 이상의 변환효율을 얻기 위해서는 베이스층의 확산거리가 가장 중요한 파라미터임을 알 수 있었다.