• ETRI Journal
• /
• v.44 no.5
• /
• pp.805-815
• /
• 2022

The model-based evolutionary algorithms are divided into three groups: estimation of distribution algorithms, inverse modeling, and surrogate modeling. Existing inverse modeling is mainly applied to solve multi-objective optimization problems and is not suitable for many-objective optimization problems. Some inversed-model techniques, such as the inversed-model of multi-objective evolutionary algorithm, constructed from the Pareto front (PF) to the Pareto solution on nondominated solutions using a random grouping method and Gaussian process, were introduced. However, some of the most efficient inverse models might be eliminated during this procedure. Also, there are challenges, such as the presence of many local PFs and developing poor solutions when the population has no evident regularity. This paper proposes inverse modeling using random forest regression and uniform reference points that map all nondominated solutions from the objective space to the decision space to solve many-objective optimization problems. The proposed algorithm is evaluated using the benchmark test suite for evolutionary algorithms. The results show an improvement in diversity and convergence performance (quality indicators).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.4
• /
• pp.72-78
• /
• 2001

In this study, high spatial resolution of IKONOS 1m image and Red(0.63~0.69) band, NIR(0.76~0.90) band in 4m image, which are the same wavelength range as Landsat TM band 3, 4, were used for extraction of the front areas of B. Xylophilus in Geuje island where is located in southern part of Korea. Moreover, since they have higher spatial resolutions than Landsat TM, they have been used for lots of studies in the field of forest and vegetation. In the results, it was validated by GPS field survey, spectral histogram analysis of IKONOS NIR band was significant available method for extracting the front areas of B. Xylophilus. In this study, 15 points were verified as real damaged trees of 22 sample points extracted from GPS field survey. This study was not only extracted the damaged trees by B. Xylophilus but also suggested the possibility of using IKONOS images for the study on the forest damages by any disease and insect pests.

• Korean Journal of Human Ecology
• /
• v.15 no.6
• /
• pp.1073-1081
• /
• 2006

The development of foundation garment pattern on the typical adult women's body was carried out. By means of the flatted body surface shell, the foundation garment pattern was developed. And its fitting test also performed. The results of this study can be summarized as follows; 1. The investigated Foundation basic pattern was made by the allowing the maximum bust size without any surplus since it was based on the tight-fitted model drawing technique. The investigated the completed pattern was designed in three parts of front and back body, including bust. 2. The result showed by overlapping the torso basic pattern foundation and body surface development selected from body almost the same except for the shift of dart position. 3. The result by overlapping basic pattern 3 existing basic patterns. On the basis of top-bust line showed that the setting up the volume of dart of bust and its waist affect the appearance of model. Especially, it was found that the above result was related to the bust and under bust line. 4. The result of the wearing test of 3 existing basic patterns and basic pattern of this study revealed that the mean values of whole items were higher than average in type P and type E. The fitting & position of under-bust line and extent of wrapping bust showed the high points in the current study and type of P. The result of evaluating the whole appearance in three points(front, side, back) showed different according to the every basic foundation garment pattern.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.4
• /
• pp.16-21
• /
• 2001

In this paper a virtual form of 3 dimensional face is synthesized from the two sheets of 2 dimensional photographs In this case two sheets of 2D face photographs, the front and the side photographs are used First of all a standard model for a general face is created and from this model the feature points which represents a construction of face are densely defined on part of ears. eyes, a nose and a lip but the other parts. for example, forehead, chin and hair are roughly determined because of flat region or the less individual points. Thereafter the side photograph is connected symmetrically on the left and right sides of the front image and it is gradually synthesized by use of affine transformation method. In order to remove the difference of color and brightness from the junction part, a linear interpolation method is used. As a result it is confirmed that the proposed model which general model of a face can be obtain the 3D virtual image of the individual face.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.45-52
• /
• 2008

In order to investigate the initiation and propagation processes of a spherical detonation wave induced by direct initiation, numerical simulations were carried out using two-dimensional compressible Euler equations with an axisymmetric assumption and a one-step reaction model based on Arrhenius kinetics with various levels of ignition energy. By varying the amount of ignition energy, three typical initiation behaviors, which were subcritical, supercritical and critical regimes, were observed. Then, the ignition energy of more than $137.5{\times}10^6$ in non-dimensional value was required for initiating a spherical detonation wave, and the minimum ignition energy(i.e., critical energy) was less than that of the one-dimensional simulation reported by a previous numerical work. When the ignition energy was less than the critical energy, the blast wave generated from an ignition source continued to attenuate due to the separation of the blast wave and a reaction front. Therefore, detonation was not initiated in the subcrtical regime. When the ignition energy was more than the minimum initiation energy, the blast wave developed into a multiheaded detonation wave propagating spherically at CJ velocity, and then a cellular pattern radiated regularly out from the ignition center in the supercritical regime. The influence on ignition energy was observed in the cell width near the ignition center, but the cell width on the fully developed detonation remained constant during the expanding of detonation wave due to the consecutive formation of new triple points, regardless of ignition energy. When the ignition energy was equal to the critical energy, the decoupling of the blast wave and a reaction front appeared, as occurred in the subcrtical regime. After that, the detonation bubble induced by the local explosion behind the blast wave expanded and developed into the multiheaded detonation wave in the critical regime. Although few triple points were observed in the vicinity of the ignition core, the regularly located cellular pattern was generated after the onset of the multiheaded detonation. Then, the average cell width on the fully developed detonation was almost to that in the supercritical regime. These numerical results qualitatively agreed with previous experimental works regarding the initiation and propagation processes.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2019

This study analyzed the pressure, subjective wearing comfort, and design preference of brassiere shoulder straps among women in their 20s and 40s. Experimental clothing was made by different shoulder strap designs on a brassiere. In the four designs (A-D), the front attachment points of the shoulder straps were the same, but the back attachment points were different. Three of them (E, E1, E2) were of a halter neck design, with different front attachment positions. The pressures of A-D were measured at the position passing through the shoulder line (P1), and E-E2 was measured at the back neck (P2) as well as at P1. Subjective wearing comfort and design preference were rated on a 7-point Likert scale. A was determined to exert the highest pressure at the neck side of the design in the pressure measurement analysis of A-E2, whereas E1 exerted the lowest. E was measured to have the highest pressure among the E-E2 designs, whereas E2 had the lowest. Participants preferred A the most and E the least in regards to the subjective wearing comfort of A-E. Thus, participants deem A to be the most comfortable despite the high strap pressure. However, E was the most favored design, despite its poor wearing comfort. Participants' subjective impressions of E-E2 were that E2 was the most uncomfortable, but its design was the most preferred. Consumers' design preferences and subjective impressions of wearing comfort did not match.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.1
• /
• pp.23-32
• /
• 1999

A new numerical method using solution-adaptive grids (SAG) is developed to solve the Richards' equation (RE) for unsaturated flow in porous media. Using a grid generation technique, the SAG method automatically redistributes a fixed number of grid points during the flow process, so that more grid points are clustered in regions of large solution gradients. The method uses the coordinate transformation technique to employ a new transformed RE, which is solved with the standard finite difference method. The movement of grid points is incorporated into the transformed RE, and therefore all computation is performed on fixed grid points of the transformed domain without using any interpolation techniques. Thus, numerical difficulties arising from the movement of the wetting front during the infiltration process have been substantially overcome by the new method. Numerical experiments for an one-dimensional infiltration problem are presented to compare the SAG method to the modified Picard method using a fixed grid. Results show that accuracy of a SAG solution using 41 nodes is comparable with the solution of the fixed grid method using 201 nodes, while it requires only 50% of the CPU time. The global mass balance and the convergence of SAG solutions are strongly affected by the time step size (Δt) and the weighting parameter (${\gamma}$) used for generating solution-adaptive grids. Thus, the method requires automated readjustment of Δt and ${\gamma}$ to yield mass-conservative and convergent solutions, although it may increase computational costs. The method can be effective especially for simulating unsaturated flow and other transport problems involving the propagation of a sharp-front.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.17-34
• /
• 2023

This study aimed to develop a fitted torso pattern with an improved fit for inverted-triangular males in their twenties. For this study, six torso patterns were collected, compared and evaluated, and a fitted torso pattern was developed using virtual fittings. The research results are as follows. First, the fitted torso pattern received a good rating as a result of the virtual fitting evaluation: waist dart set 2 of the front; the amount of comfort is set at 5 cm around the chest, 4 cm around the waist and 10 cm around the hips. Second, the evaluation of virtual fitting of the development pattern showed that fit evaluation was 4.11/5 points, ease evaluation was 6.53/7 points, and that the stress map and airgap were suitable for the human body. Third, the actual fit evaluation of the development pattern was 4.25/5 points, 6.35/7 points for ease evaluation, and 4.81/5 points for motion evaluation. Fourth, there was no significant difference between the results of the virtual and actual fitting evaluation with the objectivity test. It is therefore possible to apply a pattern developed through a virtual fitting to an actual human body and to confirm the objectivity of the pattern.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.25 no.1
• /
• pp.72-87
• /
• 2021

Objectives This is the review on the Jeolgyeong which means diagnosis method of meridian and acupoints. Detecting method of meridian and acupoints under the disease condition using fingertips were more developed in Japan than in China and Korea. This study is the introduction to the Japanese style palpation method on meridian and acupoints. Methods Firstly the textbook 'Acupuncture medicine' published by the committee of Korean professors' association of acupuncture and moxibustion was analyzed. Especially the contents of the palpation method on meridian and acupoints were focused and summarized and secondly the book describing the palpation method on meridian and acupoints was selected, translated and summarized. Results Until now the knowledge on the acupoints reaction depending on the patient's status, the deficiency pattern and the excessive pattern was rarely described in China and Korea. On the contrary, 4 kinds of reactions in the deficiency pattern and 4 kinds of reactions in the excessive pattern were well described in Japanese literatures. Mild touching, mild pinching, rubbing, mild pressing and severe pressing were also described along the meridians. Except the bladder meridian Back Shu points, Yuan points, Luo points, Xi(cleft) points, Front Mu points were depicted as the same as those in China and Korea. For the bladder meridian lines, 4 lines were organized including 2 lines of Hua-Tuo-Jia-Ji-Xue and the middle line between 1st and 2nd bladder meridian line as well as 1st bladder meridian line and 2nd bladder meridian line. Conclusions Detecting meridians or acupoints and using them for diagnosis and treatment is a method used in China, Korea, and Japan. However, detailed descriptions of the method for detecting meridians through palpation are revealed in Japanese books. Palpation methods for diagnosing meridians using touching, pinching, rubbing, and pressing methods are expected to be standardized and systematically learned in Korea.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.4E
• /
• pp.139-143
• /
• 2005

The present study aims to investigate the effects of speaker location on the speech intelligibility in a classroom. In order to this, acoustic measurements were undertaken in a classroom with three different sound source locations such as center of front wall (FC), both sides of front wall (FS) and the center of ceiling (CC). SPL, RT, $D_{50}$, RASTI were measured in the 9 measurement points with same sound power level of sound source and MLS was used as the sound source signal. Also, subjective listening tests were carried out using Korean language listening materials which were recorded in an anechoic chamber. The recorded syllables were replayed and recorded again in the classroom with same sound source at three different locations and listening tests were undertaken to 20 respondents who were asked to write the correct syllables which were recorded in the classroom. The results show that higher sound intelligibility ($D_{50}$ of $47\%$, RASTI of 0.56) was obtained when sound source was located at the FS. The results also show that high sound intelligibility was obtained at the area nearby walls.