• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.675-678
• /
• 2018

Since the face has a unique property to identify human, the face recognition is actively used in a security area and an authentication area such as access control, criminal search, and CCTV. The frontal face image has the most face information. Therefore, it is necessary to acquire the front face image as much as possible for face recognition. In this study, the face region is detected using the Adaboost algorithm using Haar-like feature and tracks it using the mean-shifting algorithm. Then, the feature points of the facial elements such as the eyes and the mouth are extracted from the face region, and the ratio of the two eyes and degree of rotation of the face is calculated using their geographical information, and the approximate front face image is presented in real time.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.8
• /
• pp.1060-1074
• /
• 2013

This study measured and analyzed pressure at each measurement part of imported compression stockings sold in Korea to provide basic information to establish a pressure standard and grade ranking. This study used 40 medical compression stockings imported from 6 countries. Pressure measurements were taken at 11 points: front side and back side of ankle, end-point of the gastrocnemius muscle, front, inner side, back, and outer side of calf, back side of below knew girth, inner side, and outer side of mid-thigh girth, and inner side of thigh girth. AMI 3037-10 and AMI 3037-2 were used for measurements taken inside an environmental chamber at a temperature of $21^{\circ}C$ and a relative humidity (RH) of 65%. For the measurements, 11 air pack sensors were attached to a wooden model leg (Hohenstein) and three measurements were taken at each measurement point in three minutes. The average of these measurements was used for analysis. The findings of this study were as follows. As for the front side of the ankle, of the 40 products, 14 products (6 USA, 2 Swiss, 3 Italian, and 2 Taiwanese) were within the pressure range indicated on the product label; however, no German products fell within the pressure range. A total of 8 products (5 USA, 1 Swiss, 1 Italian, and 1 German) were gradient compression type; however, no Japanese or Taiwanese product were of this type. The majority of products had the highest pressure at the end-point of the gastrocnemius muscle. Only 3 products, 1 USA (Jobst Opaque 30-40mmHg), 1 Swiss (Sigvaris Cotton 34-46mmHg) and 1 Italian (Jobstocking 25-32mmHg), had measurements that met the indicated standard pressure, were a gradient compression type, and met the overall standard for compression stockings.

• Journal of the Korean Home Economics Association
• /
• v.27 no.2
• /
• pp.31-42
• /
• 1989

The purpose of this study was to develop a computer program to draft princess line onepiece dress pattern. To this study, the Turbo Pascal Compiler and the Pascal language were used. The procedures of the study were as follows: 1. A basic onepiece dress pattern was drafted by the hand operation. 2. The co-ordinate points were instituted for indication of relative position of all necessary points in drafting. Total sixty-nine co-ordinte points (front: thirty-five, back: thirt-four) were instituted. 3. The two subprograms for main program were developed to solve geometric problems and to draft straight lines and curved lines of the onepiece dress pattern. 4. The program was accomplished by putting indivisual body measurement 5. Grading fo five size was given.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.769-774
• /
• 2003

In this paper, the performance of a domestic Kim-Chi refrigerator is predicted by using a calculation model & experiment. The objectives of this study are to find out the best design points of a refrigeration system and calculate an adiabatic characteristic to change outdoor temperature. The best design points such as refrigerant charge and capillary length were experimentally investigated. And the calculation model is conducted as a function of calculation parameters and outdoor temperature. According to this study results, the best design points of a refrigeration system are each 95g of a refrigerant charge and 3500/3500mm of capillary lengths. And the power consumption is 13.578 Kwh/month. And a part of the worst heat loss is a front side of a domestic Kim-Chi refrigerator body.

• Proceedings of the Costume Culture Conference
• /
• 2005.10a
• /
• pp.48-54
• /
• 2005

In order to mass-customize clothes, it is essential to take into account individual body shape using computerized 3D body models. This paper describes the development of an interactive body model that can be altered to match individual body perimeter, postures and depth for the purpose of computerized pattern making. Construction of the body model requires the extraction of necessary points, adjustment of coordinate points, linking of points by spline curves, control of section lengths and selectability of various hip types. Front to back depth of the model is adjusted by scaling ratio. We had a great result for controlling perimeter, posture and depth of body shapes. The results support the adaptability and potential usefulness of the posture and depth adjustable body model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.767-778
• /
• 1992

Is discussed. A method to extract feature points and to synthesize human facial images In 3-Dmodel-based ceding system, faciai feature points are extracted automatically using some image processing techniques and the known knowledge for human face. A wire frame model matched to human face Is transformed according to the motion of point using the extracted feature points. The synthesized Image Is produced by mapping the texture of initial front view Image onto the trarnsformed wire frame. Experinent results show that the synthesitzed image appears with little unnaturalness.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.173-191
• /
• 2002

The purpose of this study was defined efficient throw motion pattern to obtain the quantitative data and to achieve successful bowling through kinetic - kinematic variables on the throw motion. Subject of group composed of three groups : Higher bowlers who are two representative bowlers with 200 average points and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 frame per secondary. One-way ANOVA has been used to define variable relations. Analyzed result and conclusion are the following : The displacement of back of the hand must have wider difference of each right-left displacement to increase the spin of the ball. In high bowlers group, difference between the front-rear position of back of the hand in case of success and that in case of failure in follow throw is 0.17m. That is to say, momentum in case of success come to increase greatly, compared with that in case of failure. To increase the spin of the ball, the potential difference should be narrower in follow through. In case of the high bowlers, the velocity of the front-rear direction of the back of the hand has been the fastest both in release and follow through, compared with those in other groups, which has contributed to increasing the spin force of the ball. The orders in the resultant velocity of the back of the hand has shown the this : the finger tip$\rightarrow$the back of the hand$\rightarrow$wrist.These orders made the proximal segment support the distal segment. The distal segment has provided the condition to accelerate the velocity. In case of failure, the suddenly increased velocity has caused the failure in the follow through. Acutely flexing the angle of the back of the hand has contributed to lifting to increase the spin of the ball.

• Convergence Security Journal
• /
• v.14 no.1
• /
• pp.51-57
• /
• 2014

The purpose of the research is to let people recognize the necessity of Karatedo training and enhance the value of it. Karate sparring is quite helpful to learn the skills that how to escort a protectee as a guard. The skills are divided into hand skills, foot skills and pitching skills. Firstly, it is the hand skills. 'ap-son-chi-gi' or 'di-son-chi-gi' at pressure points such as face, neck and abdomen is effective to overpower adversary. If straight attacks are not easy, 'return stroke' is better. Secondly, it is the foot skills. Front kick towards pressure points, straight attacks like side kick and hindpaw kick and curving attacks like front-spinning kick, 'ap-hu-ri-gi and 'di-hu-ri-gi', these are different types of the foot skills. Lastly, it is the pitching skills. To overpower compeletly, tripping up and 'hu-ri-gi' for breaking the balance and then hand and foot skills for attacking the pressure points are the best way.

• The Research Journal of the Costume Culture
• /
• v.30 no.6
• /
• pp.828-841
• /
• 2022

This study aims to develop a fitted torso pattern suitable for males in their forties and fifties who are obese-a group that accounts for more than fifty percent of men in this age group-using a 3D virtual fitting program. Size Korea's 2022 data for obese males in their forties and fifties is utilized for this study. In terms of the research method, a 3D program (CLO 3D) is used to implement the target group's various body types and to apply fitted torsos that enable verification and evaluation of the pattern's fit and ease. The characteristics of fitted torso patterns for obese bodies are as follows: the front centerline is a profile line; shoulder darts are added by reflecting waist-abdominal protrusion in the front panel; and shoulder, arm, waist, and center-back darts are constructed for the back panel. For obese bodies, the minimum circumference ease amounts should be approximately 6-7cm for the chest, 6cm for the waist, and 6-7cm for the hips. Based on an evaluation of the virtual fit of the developed fitted torso pattern, the data shows that a pattern (foundation) such as this is well suited for obese body types with an average of 4.67/5 points for reverse triangular obesity, an average of 6.67/7 points for log obesity, and an average of 6.69 points for the ease amount.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.595-606
• /
• 2020

This study develops an optimal two-dimensional (2D) pattern from three-dimensional human scan data by considering the cycling posture and dermatome of high school male cyclists. By analyzing the body surface change in the cycling posture and considering the dermatome of the lower limbs, the optimal cutting line setting and the development of cycling tights for individual cyclists were presented to provide data that could be used in the clothing industry. We designed three cycling tights to solve the size unsuitability. 3D design 1 is a non-extension design based on the analysis of the 3D human body scan data, in which parts were connected diagonally from the front of the knee to the back of the knee. 3D design 2 removed both the front and back to reduce air resistance during cycling. 3D design 3 did not have a cutting line on the front panel because of the air resistance during cycling in the front area. We analyzed the garment pressure for 8 points of lower body and performed a subjective evaluation of the 3D designed tights and the current cycling tights. The 3D design 1 in this study was well received in the omphalion, thigh, and hip area, while 3D design 3 was well received in the omphalion, thigh, hip, and bottom bands. Therefore, the LoNE of 3D design 1 was applied to the front, and the hip cutting line of 3D design 3 was applied to the back.